|
| 1 | M&L for Removing of existing unserviceable water proofing treatment including PCC tiles (except PCC padding) taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises out side MD land complete all as specified and directed. |
| 2 | Dismantling of un-reinforcement lime concrete/cement concrete in padding to roof slab and removing the rubbish off premisesout side MD land complete all as specified and directed. |
| 3 | M&L for providing cement concrete type B-0, 1:2:4 using 12.50mm graded aggregate laid to slope in padding for WPT over roof slab complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L forrendering10mm thick in CM 1:4,mixed with WPC @3% by weight of cementon fair faces of concrete surfaces without using extra cementas in roof complete all as specified and directed.Note:- WPC shall be measured & paid separately. |
| 5 | M&L for preparing clean and dried plastered surface and applying a coat of oil basedbitumen primer conforming to IS 3384-1986 @ 0.30 litrs/sqmand then laying APP polymer modified membrane 3.5mm thick with non woven polyster reinforced membrane (min 3.50 kg/sqm) having thermal insulation with white mineral gravel finish on upper side of membrane and laid by torch application method to the entire surface all as specified and directed by Engineer in Charge. |
| 6 | Supply only intergral water proofing compound complete all as specified and directed. |
| 7 | Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) n.exc 1.5 sqmeach complete all as specified and directed. |
| 8 | Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each complete all as specified and directed. |
| 9 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed. |
| 10 | Taking down and refixing shutters of any description exc 1 sqm and n exc 2 sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed. |
| 11 | S&F for solidPVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed. |
| 12 | S&F in repair for framed work as in door frames or gates chowkats of angle or other section withbraces, etc., complete, drilled or welded for ms hinges for fixing of gate or doors other covering andalso fastening and fixing complete all as specified and directed. |
| 13 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 14 | M&L for 35 mm thick 2ndclass hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc(with shash bar) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed by Engr-. in Charge. |
| 15 | M&L for30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated and all as Specified and as directed by Engineer- in -Charge. |
| 16 | M&L aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm, bottom size 92x31.75x1.50 mm and shutter top & bottom of size 40x18x1.50 mm and sides (handle) of size 40x18x1.50 mm and lock side shutter frame of size 40x18x1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete (including provision for cooler/AC opening) including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4 mm thick glass with necessary rubber beading gasket etc, one wire mesh shutter and and two nos glass shutter as per drawing No CEAA/STD/01/2010 sheet No 1/1 complete all as specified and as directed by Engr-in-Charge. |
| 17 | S&F aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31x42x1.50 mm (rectangular tub of size 40x20x2mm (and middle vertical of size 42x46.20x1.50 mm Section and clip for fixing wire mesh and glass of size 19x17.30x0.90 mm thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 4 mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engineer-in-Charge. |
| 18 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings;Flat Ironwelded framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 19 | S&F 100 mm long SS butt hinges and fixed to frame with scrwewd or welding / gas welding complete all as specified and directed. |
| 20 | S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 21 | S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and directed in Engineer -in -Charge. |
| 22 | S&F for 150mm longExtruded aluminium alloy handles, fabricated type, anodisedall as specified and as directed by Engineer-in-Charge. |
| 23 | S & F in repairs 300mm mild steel ordinary rat rail/helical spring including roller, roller plate complete with provision of fixing in wooden,welded to pressed steel or angle iron frame complete all as specified and directed. |
| 24 | S&F 150mm long Floor door stopper of alunium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified and directed. |
| 25 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples orteak wood beading for wooden doors etc complete all as specified and directed. |
| 26 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed. |
| 27 | S&F in repair 25 mm dia Stainless steel drapery rod with and including two nos of bracket/holders suitable for drapery 25 mm dia rods of one window / door openings complete all as specified and as directed. |
| 28 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid and bedded on pointed on any mortar complete all as specified and directed. |
| 29 | M&L for granite work (of any type) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc all as specified and directed in Engineer -in -Charge. |
| 30 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the permice complete all as specified and directed. |
| 31 | M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6.complete all as specified and directed. |
| 32 | M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 33 | M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 34 | M&L glazed ceramic coloured tiles 450 x 350mm x 7mm thick invertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM 1:4 ,etc complete all as specified and directed. |
| 35 | M&L for machine cut kota stone slab flooring 20 - 25mm thick over cement mortar 15mm (1:6) screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including backing coat complete all as specified and directed. |
| 36 | M&L for 15-18mm machine cut Pre- polished kota stone slab in single piece with round nosing with three numbers of serration as in treads of steps for staircase laid overcement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of of the slab including rubbing and mirror polishing complete all as specified and as directed by EIC over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed |
| 37 | M & L for machine cut Pre polished kota stone16-18 mm thick (single peicein raiser of steps), skirting, dado and pillarlaid andjointed with grey cement slurry including cutting and mirror polishing over and including 10 mm thick screed bed in CM 1:3complete all as specified and directed |
| 38 | Demolition of wall of brick and stone wall built in cement mortorincl all quoins, archs, pillars,etc complete all as specified and directed. |
| 39 | M&L for Half brick work sub class B bricks, straight or curved on plan to any radius built in half brick thick wallsCM 1:4 complete all as specified and directed. |
| 40 | M&L for brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 41 | Demolition of cementconcrete (reinforced) of roofs (other than ground floors), beams, staircases, landing, chajjas and similar suspended workcomplete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips complete all as specified and directed |
| 43 | M&L for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm graded stone aggregate) as in as slab suspended slab,shalves , plateform and the like complete all as specified and directed |
| 44 | M&L for formworks to chullah hods , chajjas , Troughs and similar items incl edges complete all as specified and directed |
| 45 | Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed |
| 46 | M&L for rendering 10 mm thick on fair faces of concrete or brick masonary CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 47 | M&L for rendering 15 mm thick on fair faces of concrete or brick masonary CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed |
| 48 | M&L for rendering 5 mm thickin ceiling surfaces.CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed |
| 49 | S&F of wire netting of galvanised steel wire 1.40mm dia with 20mm size of mess fixed with tinned tacks of wire staples complete all as specified and directed. |
| 50 | M&L for complete removal of existing treatment of wall surface and applying two coat of distemper oil emulsion over and incl 3mm thick coat ofwall care putty complete all as specified and directed. |
| 51 | M&L for preparation ofnew plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer and 3mm thick coat ofwall care putty complete all as specified and directed. |
| 52 | M&L for complete removal of existing treatment of ceiling surface and applying two coat of distemper oil emulsion complete all as specified and directed. |
| 53 | M&L for preparation ofnew plastered surface of ceiling and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. |
| 54 | M&L for complete removal of existing treatment of wall surface and applyong two coat of weather proof acrylic paint over a coat of primer in old surface of wall and filling cracks with white cement etc complete all as specified and directed. |
| 55 | M&L for preparation ofnew plastered surface of wall and applying two coats of weather proof acrylic paintover a coat of primer complete all as specified and directed. |
| 56 | Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above G.L) complete all as specified and directed. |
| 57 | M&L for 75mm thickCement concrete type B- 1, 1:2:4 (20mm graded aggregate) as in plinth protection and Finishing cementconcrete surface even and fair with brooming and every 2mtr constrction joint to be provided and filled with bitumen with saw dust complete all as secified and directed. |
| 58 | M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base complete all as specified and directed |
| 59 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey pigment cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15mm thick CM (1:6)screed bed or bedding layer complete all as specified and directed. |
| 60 | S&F 10mm dia,100mm length anchor bolt insert in brick wallsby drilling for fixing of cooler stand complete all as specified and directed. |
| 61 | Excavating in post holes (or similar holes) each not exc 0.5 Cum in soft/loose soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface complete all as specified and directed. |
| 62 | M&L for PCC (1:3:6) type C-2using 40mm graded stone aggregate as in foundation of posts and pillars etc complete all as specified and directed. |
| 63 | Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed. |
| 64 | Taking up or down 20mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed. |
| 65 | S&F of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on WALLS / CEILING complete all as specified. supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and directed. |
| 66 | S&F of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on WALLS / CEILING complete all as specified. supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and directed. |
| 67 | Labour only for cutting chases, in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to endsor edges of andings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubingand making good cutting not exc 10 cm grith complete all as specified and directed. |
| 68 | S&F in repair Fancy type CP bib taps15 mm dia ,chromium plated cast copper alloy withhalf turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed . |
| 69 | S&F in repair Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure withhalf turn type capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed. |
| 70 | S&F in repair, two way angle valve cock chromium plated fancy type bore 15mm.Make L & K Code No 0327 techno or equivalent as approved by GE. |
| 71 | S&F in repairFancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type)screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed.complete all as specified and directed |
| 72 | S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed. |
| 73 | M&L 75mm dia of outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 74 | S&F in repairs Vitreous china wash basin white flat back size 630X450 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 75 | S&F in repairs 15 mm dia pillar tapes Fancy type of Chromoum Platedbrass withhalf turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed. |
| 76 | S&F in repair PVC waste pipe of 32 mm dia for wash basin/sink complete all as specified and directed |
| 77 | S&F waste coupling of 32mm dia brass CP for glazed ware sink basins, etyc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed. complete all as specified and directed |
| 78 | S&F waste coupling of 40 mm dia brass CP for glazed ware sink basins, etyc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed. complete all as specified and directed |
| 79 | S&F in repair 125 mm dia Fancy type CP shawer rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed . |
| 80 | S&F in repairs SS soap dish of size 100mm complete all as specified and directed by Engineer-in-Charge.Make Cera |
| 81 | S&F PVC cabinet with mirror of size 300mmx450mm all as specified and directed by Engineer-in-Charge |
| 82 | S&F 5.00 mm thick 600 x450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 83 | S&F in repairs vitreous china wash down water closet pan pedestal pattern ,white excluding fixing cistern and flush pipe trap front or back inlet including seat cover of any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tubeand ABS wall hook complete all as specified and directed. Make :Cera /Hindustan/Parryware |
| 84 | S&F in repair PVC valveless, syphonicaction type flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handleincluding bracket, complete all as specified and directed. |
| 85 | S&F in repair brass chromium platedtubular towel rail 20 mm dia \"D\" type 60 cm long including brackets/flanges completed all as specified and directed. |
| 86 | S&F PVC water connection 450 mm long to wash basin of 15mm dia including CP nuts and washers all as specified and as directed by Engineer-in-Charge. |
| 87 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 88 | S&F in repair stainless steel 1 mm thick plate rack of size 750x600x250mm of approved make including taking down old wooden plate rack complete all as specified and directed. |
| 89 | Supply & fixed in repair CP peg set of four as per sample kept in GE’s office complete all as specified and directed. |
| 90 | S&F solid PVC kitchen cabinets/cupboard made withdoor frame of size 48x40mm, shutter 20mm thick shutter and including 75mm size Stainless steel butt hinges complete all as specified and as directed by Engineer-in-Charge. |
| 91 | S&F CP decorative type SS handles 75mm long fixed to PVC sheet or frame all as directed by Engineer-in- Charge. |
| 92 | S&F magnetic catcher and connected plate to shutter as per sample complete all as specified and directed. |
| 93 | S&F door seal strips strong rubber weather stripping door at bottom (standard length) complete all as specified and directed. Make : Seal plus |
| 94 | S&F in repair for glass corner shelf 12 x 12 inch wall mount with 5mm thickness with SS raillingcomplete incl bolt/bracket for securing to wall all as specified and as directed by Engineer-in-Charge. |
| 95 | Dismantling water tanks and exc. 500 but n. exc. 1000 litre capacity complete all as specified and as directed. |
| 96 | S&F rotational moulded water storage tank 750ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 97 | S&F 20mm dia (min weight 210 gms) PVC ball valves high pressure of PTMT withepoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 98 | M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromateand two coats of synthetic enamel paint complete all as specified and directed. |
| 99 | Taking down PVC pipe (SWR) 110mm dia bore and connection complete all as specified and directed. |
| 100 | Taking down PVC pipe (SWR) 75 mm dia bore and connection complete all as specified and directed. |
| 101 | S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall complete all as specified and directed. |
| 102 | S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints laid in trenches complete all as specified and directed. |
| 103 | S&F 110 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall complete all as specified and directed. |
| 104 | S&F 110mm borePVC (SWR) bends any radius with access door complete all as specified and directed. |
| 105 | S&F 110mm borePVC (SWR) junction single, (single T) equal or unequal any radius with acess door complete all as specified and directed. |
| 106 | S&F 110mm borePVC (SWR) cowl any radius complete all as specified and directed. |
| 107 | S&F 75mm borePVC (SWR) bends any radius with access door complete all as specified and directed. |
| 108 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as pattern decided by Engr-in-Charge including providing grooves between panels if any as complete all as specified and directed. |
| 109 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 110 | M&L Anodised aluminium snap grid frame work of size (605mm X 605mm) using T grid/Cross-T/Wall angle/level clip & suspenders for false ceiling and similar works including hangers 6mm dia. G.I. wire (upto 1200 mm length) size of grid (605 mm X 605 mm ) adjusting level fixed to roof slabs/trussesby means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60 mm long and expansion hold fastener 12.5mm dia 40mm long complete as in repairs all as specified and directed. |
| 111 | S&F False ceiling 12 mm thick gypsum tiles (600mm x 600 mm) laminated with PVC film on the face side & metalized polyester film on the back side with all four edges sealed with PVC film fixed complete all as specified and as directed by Engineer-in-Charge. |
| 112 | M & L including taking down for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly, drawn through inexistingconduit pipefixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0 mm thick laminated sheet where as required and accessories complete suitable for the following :- (a) One light/fan point controlled by one, oneway switch complete all as specified and directed. |
| 113 | All as per item No 112 here in before but one socket outlet 05 Amps on the same board complete all as specified and directed. |
| 114 | All as per item No 112 here in before but one socket outlet 05 Amps on independent board complete all as specified and directed. |
| 115 | All as per item No 112 here in before but two way light point complete all as specified and directed. |
| 116 | All as per item No 112 here in before but one bell/buzzer point controlled by on bell push complete all as specified and directed. |
| 117 | All as per item No 112 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and directed. |
| 118 | S&F in replacement Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and directed. |
| 119 | S&F in replacement Switch piano, single pole two way 5 Amps 240 volt capacity flush type complete all as specified and directed. |
| 120 | S&Fin replacement 3 pin 5 Amps Socket outlet , flush type and complete all as specified and directed. |
| 121 | S&Fin replacement Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and directed. |
| 122 | S &Fin replacement electric bell ding dong AC 230 volt single pole complete all as specified and directed. |
| 123 | S&Fin replacement 5 pin, 5 Amps switch & socket combination flush type multipurpose3 pin, 5 Amp flush type universal complete all as specified and directed. |
| 124 | Supply and fixin replacement 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed. |
| 125 | S& F in replacement ceiling rose, 5 Amps surface type 240 volts bakelite three terminal complete all as specified and directed. |
| 126 | S&F in replacement fan regulator electronic step type 230 volts switch /socket type suitable for any type of ceiling fan sweep complete all as specified and directed. |
| 127 | S &F in replacement electric bell ding dong AC 230 volt single pole complete all as specified and directed. |
| 128 | S&F in repairs8 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed |
| 129 | Supply and fixingin replacement 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB, DB ccomplete all as specified and directed for following :-(a)SP 5 To 32 AMP |
| 130 | All as per item No 129 here in before butSPN 40AMP ccomplete all as specified and directed |
| 131 | Supply and layingfixingin replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with standed for 25 sq. mm, 4.0 core nominal cross section in service connections complete all as specified and directed. |
| 132 | S & Fin repairs of LED batten fitting alongwith removable LED Tube 20W, 230 Volt, 6000K, wall /ceiling mounted ,LED battenfixed by means of bolts,ABS rotor suitable for single side connections. LED rod having glass material complete haivng lumen efficacy minimum 100 lm/w,CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internallly prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 133 | Supply and fixing in repairsLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 134 | Supply and fixingin repairs LED light 35 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.Incl all electrical connection complete all as specified and as directed. |
| 135 | Supply and fix exhaustin replacementfan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm incl all electrical connection complete all as specified and as directed. |
| 136 | Supply and fixin replacement exhaust fan made of steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers incl all electrical connectioncomplete all as specified and as directed. |
| 137 | Taking down of ceiling fan and depositing to MES store yard including replacement 02 core size 0.75 Sqmm copper wire, painting, servicing andand refixing the same on same position after the work is complete all as specified and as directed. |
| 138 | Taking down of geyser 25 ltr capacity andrefixing the same on same position after the work iscomplete all as specified and directed. |
| 139 | M&Lfor in replacement concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS,flexible multi stranded copper conductor cable 1100 volts grade, drawn through and in existingconduit pipeincluding one run of 4.0 Sqmm single core PVC insulated, FRLS ,flexible copper cable as earth continuity conductor in green colour all as specified and as directed.Note- (a)Two runs of single core cable with one run of earth continuity cable will be measured and paid as one unit. (b)Make disturbed surface good to wall/floors . |
| 140 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, / laying of pipe / cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil completeall as specified and directed. |
| 141 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick using excavated soil complete all as specified and directed. |
| 142 | Removing excavated soil to distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting complete all as specified and directed. |
| 143 | Material and labour for boring of holes under road, pavement, hard standing by trenchless technology using ultra sound techinque/ manually and necessary machine complete all as specified and as directed. |
| 144 | Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neaoprene \"O\" rong of 40 mmsize complete all as specified and directed. |
| 145 | S& F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 146 | M&L for painting ofmeter panel box installed at bldg stair with syentheticenamel paint of existing colour complete all as specified and directed. |
