|
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Material and labour for brick work with subclass \"B\" bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 3 | Material and labour for brick work with sub class \"B\" bricks, straight or curved on plan to any radius in half brick thick walls built in in cement mortar 1:4 (using old size bricks) complete all as specified and directed. |
| 4 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 5 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed. |
| 6 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and fair complete all as specified and as directed |
| 7 | Material and labour for rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth as in ceiling complete all as specified and directed. |
| 8 | Material and labour for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification two or more coats on new work complete all as specified and directed. |
| 9 | Material and labour for two coats of oil bound distemper in any tint on wall surfaces including preparation of old surfaces complete all as specified and directed. |
| 10 | Material and labourfor applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.etc complete all as specified and directed. |
| 11 | Material and labour for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified. |
| 12 | Material and labour for two coats of white wash on ceiling including preparation of old surfaces complete all as specified and directed. |
| 13 | Material and labour for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed. |
| 14 | Material and labour for one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified. |
| 15 | Material and labour for complete removal of existing treatment and preparation of surface of wall/ceiling etc. and applying 2 mm thick pop (as in approved design including asthetic designs) complete all as specified and directed. |
| 16 | Material and labour for one coat of plastic emulsion paint/texture paint over already prepared POP surfaces of wall/ceiling complete all as specified and directed. |
| 17 | Material and labour for vitrified ceramic coloured tiles 8-9 mm thick dark shed (square/rectangular) polished area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiling and cement mortar bedding (but not backing) andrubbish off the premises complete all as directed and specified and directed. |
| 18 | Descriprion all as per item No 18 here in before but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as directed and specified. |
| 19 | Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existingwall tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as directed and specified. |
| 20 | Material and labour for non-skid/mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 7-8 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 21 | Description all as per item No 21 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as directed and specified and directed. |
| 22 | Material and labour for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 Square metre, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 23 | Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confiRunning metreing to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed. |
| 24 | Material and labour for Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 25 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) concrete of any description in any position not otherwise specially provided forfloor etc complete all as specified and directed. |
| 26 | Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 27 | Material and labour for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified and directed. |
| 28 | Material and labour for precast cement concrete louvres and jallies type B0 1:2:4 (12.5mm graded aggregate), 25mm thick (measured solid) set in cement mortar 1:4 including all mouldings but excluding frame complete all as specfied and directed. |
| 29 | Material and labour for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and set in cement mortar 1:4 complete with joints to match complete all as specfied and directed. |
| 30 | Dismantling of stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 31 | Material and labour for 18-20 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platfoRunning metres and like in 15mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified including moulding complete all as specified anddirected. |
| 32 | Taking down chowkats or frames not exc. 1.5 Sq mtr each with shutters (without taking off shutters) from the frames complete all as specified and as directed. |
| 33 | Taking down shutter of any description exc 1.0 sq.m but n.exc 2.00 Square metre each complete all as specified and directed. |
| 34 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 35 | Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls fixed with L-type or screws J-type or cranked hook bolts etc complete all as specified and directed. |
| 36 | Supply and fixing for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 37 | Supply and fixing for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 38 | Dismantling timber scantling 40 sqcm and over in section, in any position unframed/ framed work complete all as specified and directed |
| 39 | Dismantling structural steel work including doors, gates but excluding framed truss etc.as specified and directed |
| 40 | Supply and fixing of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming toFe 410-W(Gde E-250) quality-A all as specified and directed |
| 41 | Supply and fixing mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- foRunning metreing to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 42 | Supply and fixing in repair SS grade 204 drapery rod 20mm diaincluding decorative brackets, decorative finals at both ends complete all as specified and directed. |
| 43 | Supply and fixing for 15 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor including taking down of old unserviceable pipes complete all as specified and directed. |
| 44 | Supply and fixing for 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor including taking down of old unserviceable pipes complete all as specified and directed. |
| 45 | Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 46 | Supply and fixing in repair, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all as specified and directed. |
| 47 | Supply and fixing in repair of vitreous chinaware wash downwater closet pan (Padestal pattern)including fixing bolt, flushing cistern, Dual flush single piece EWC with soft close seat cover fittings \"P\" or \"S\" trap complete all as specified and directed. |
| 48 | Supply and fixing in repair of Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 49 | Supply and fixing in repair of 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed. |
| 50 | Supply and fixing in repair of vitreous China600x480 wash hand basin, size as per manufacturer any design approved by GEincluding 15mm dia CP brass waste coupling, 450 mm long HDPEPVC connection, 750 mm long 32mmbore HDPE waste down pipe including CI brackets complete all as specified and directed. |
| 51 | Supply and fixing in repair pillar taps, brass, with capston heads, fancytype chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 52 | Supply and fixing in repair health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 53 | Supply and fixing in repair of bevelled edge mirror frame less of selected quality glass of size 600 mm x 450 mm fixed with 4 nos SS studs etc complete all as specified and as directed. |
| 54 | Supply and fixing in repair of tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed |
| 55 | Supply and fixing rotational moulded polyethylene water storage tanks capacity of tank 500 litres tripple layer, white colour,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 56 | Supply and fixing rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic bal complete all as specified and directed. |
| 57 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed. |
| 58 | Supply and fixing wall /ceiling hollow PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed. |
| 59 | Material and labour for providing & fixing false ceiling ofDesigner tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross \"T\" of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \"T\" at 600 mm c/c tofoRunning metre a grid of 1200x600mm and secondary cross \"T\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to foRunning metre grids of 600x600 mm and wall angle of size 24x22x0.40mmand laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main \"T\", bottom exposed width of 15mm of all \"T\"\" sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, complete all as specified anddirected. |
| 60 | Supply and fixing for anodised aluminum powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having two Disc or D type handle, two aluminum tower bolt 200 mm size, one brass mortice lock of 6 lever with key and one hydraulic door closure, shutter to be partly glaze with 5mm thick tinted coloured glass in upper panel and partly pannelled with 12mm thick both side pre-laminated particle board in lower panel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete including dismantling existing door any type complete all as specified and directed. Chowkhat Frame:- 101.60 x 44.45 x 1.54 mmShutter Vertical style:- 83.00 x 44.45 x 1.54 mmShutter Middle Rail:- 83.00 x 44.45 x 1.54 mm Shutter Top Rail and bottom Rail:- 114.30 x 44.45 x 1.54 mm |
| 61 | Supply and fixing for partition wall made out of anodised aluminium powder coated section 83 x 44.45 x 1.54 mm top and bottom rail and middle rail 83 x 44.45 x 1.54 mm complete with 5mm thick tinted glass in top panel and 12 mm thick both side pre-laminated particle board in bottom panel complete with rubber packing/aluminum beading etc. including provision of aluminium door with stainless steel hinges, two Disc or D type handle, two aluminum tower bolt 200 mm size and one Hydraulic door closer with provision of brass mortice lock 6 lever complete including dismantling existing partition any type complete all as specified and directed. |
| 62 | Supply and fixing in repair of 12 mm thick toughned glass with openable door with itching of approved design including all fittings such as Bottom patch 163x50x31 mm, Top patch, over panel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, pivot for Floor door closer, Pivotfor top, wall to glass 90 degree connector, wall mounted over panel patch with pivot, \"H\" type handle 450 mm long complete all as specified and directed. Note: All fittings should be stainless steel 304 grade and approved GE. |
| 63 | Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed. |
| 64 | Material and labour for grinding, rubbing and polishing of old existing kota/terazzo/ marbleetc to achieve granite finish complete all as specified and directed. |
| 65 | Supply and fixing in repair for 3 mm thick Acrylic sheet fixed with screw on existing mild steel frame as in view cutters complete all as specified and directed.Note:- Mild steel frame work shall be measured and paid seperately. |
| 66 | Supply and fixing in repair of door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 67 | Supply and fixing in repair of fancy type glass corner 300mm radius of 5mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 68 | Material and labour for concealed point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC concealed conduit medium duty 20mm dia or higher size PVC conduit complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction boxof thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. |
| 69 | One light point,controlled by one way switch, complete all as specified anddirected. |
| 70 | One fan point, controlled by one way switch through regulaor, complete all as specified anddirected. |
| 71 | One bell point, controlled by bell push switch, complete all as specified anddirected. |
| 72 | One three pin 5 Amp socket on same board with other switches, complete all as specified anddirected. |
| 73 | One three pin 5 Amp socket on independent board, complete all as specified anddirected. |
| 74 | Allas per ItemNo 68.00here-in- above but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mmPVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified anddirected. |
| 75 | Material and labour for point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit any type or size complete including pressed iron/steel suction boxof thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for sunken boxes after taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: |
| 76 | One light point,controlled by one way switch, complete all as specified anddirected. |
| 77 | One fan point, controlled by one way switch through regulator, complete all as specified anddirected. |
| 78 | One bell point, controlled by bell push switch, complete all as specified anddirected. |
| 79 | One three pin 5 Amp socket on same board with other switches, complete all as specified anddirected. |
| 80 | One three pin 5 Amp socket onindependent board, complete all as specified anddirected. |
| 81 | Allas per ItemNo 69.00 mentionedhere-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified anddirected. |
| 82 | Material and labourfor sub main wiring using approved colour coding as per IS,with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLSH copper conductor multistranded drawing in and including 20 mm dia or higher medium duty PVC concealed conduit and conduit accessories and fittings including one single core green colour PVC insulated unsheathed FRLSH cable copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete including cutting chases for conduits etc after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductorand conduit shall be measured as one unit.(ii) The quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs) |
| 83 | 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified anddirected. |
| 84 | 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified anddirected. |
| 85 | Material and labourfor sub main wiring using approved colour coding as per IS,with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor shall be measured as one unit. |
| 86 | 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified anddirected. |
| 87 | 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified anddirected. |
| 88 | Supply and fix switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed. |
| 89 | Supply and fix socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed. |
| 90 | Supply and fix switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed. |
| 91 | Supply and fix socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed. |
| 92 | Supply and fix bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed. |
| 93 | Supply and fix calling bell ding dong type AC 230 Volt single pole complete all as specified and directed. |
| 94 | Supply and fix lamp holder polycarbonate insulated body, with back plate suitable for batten fitting complete all as specified and directed. |
| 95 | Supply and fix stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size230 volts, 6 Amps 120 watts complete all as specified and directed. |
| 96 | Supply and fix Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed. |
| 97 | Supply and fix energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 98 | Supply and fix energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 99 | Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 100 | Supply and fix LED Bulk head light fitting 10 Watt capacity die cast alluminum including surface mounted, with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed. |
| 101 | Supply and fixing LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete all as specified and directed. |
| 102 | Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including taking down existing unserviceable and depositing to MES store yard complete all as specified and directed.Note:- DB and MCCB/MCB shall be of same make. |
| 103 | Supply and fix distribution board SPN 12 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including taking down existing unserviceable and depositing to MES store yard complete all as specified and directed.Note:- DB and MCCB/MCB shall be of same make. |
| 104 | Supply and fix distribution board Triple pole and neutral double door 415 Volt 4 way DBs IP-43 suitable for 160 Amps rated bus bar incl taking down existing unserviceable and depositing to MES store yard complete all as specified and directed.Note:- DB and MCCB/MCB shall be of same make. |
| 105 | Supply and fix distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as incoming incl taking down existing unserviceable and depositing to MES store yard complete all as specified and directed.Note:- DB and MCCB/MCB shall be of same make. |
| 106 | Supply and fix MCB single pole and neutral 240 volt 10 KA 40 Amp \"C\" series conforming to ISI marked complete all as specified and directed. |
| 107 | Supply and fix MCB single pole and neutral 240 volt 10 KA 32 Amp \"C\" series conforming to ISI marked complete all as specified and directed. |
| 108 | Supply and fix MCB single pole 240 volt 10 KA 6- 32 Amp \"C\" series conforming to ISI marked complete all as specified and directed. |
| 109 | Supply and fix MCB TPN 415 volt 10 KA 63 Amp \"C\" series conforming to ISI marked complete all as specified and directed. |
| 110 | Material and labour in replacement for earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised from 4 mm dia earth lead by means of bolts, nuts, check nuts and wathers of GI or steel all as shown in electrical plate No. 5 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber ( 1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete. Note: (i) If the desired earth resistance less than 05 Ohm is not found within permissible limit shall be redone by contractor at no extra cost.(ii) Cost of GI wire 4 mm dia earth lead and 20mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering upto 7.5 mtr is included in the rate quoted for this item. |
| 111 | Material and labour for laying, jointing and testing in replacement undergroundXLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area all as directed: Notes:(a)Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately.(b)Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses.(c)Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor. |
| 112 | 10.0 Sqmm, 4 core, complete all as specified and directed. |
| 113 | 16.0 Sqmm, 4 core, complete all as specified and directed. |
| 114 | 25.0 Sqmm, 4 core, complete all as specified and directed. |
| 115 | Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etcand getting out complete all as specified and directed. |
| 116 | Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed. |
| 117 | Material & labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as specified and directed. |
| 118 | Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed. |
| 119 | Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 120 | Supply & Laying GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as specified and directed. |
| 121 | NOTE:- Amount of credit ofRs. 91312.00for retrieved materials is mentioned in Schedule of Credit Page No 29 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
