|
| 1 | Eartwork in excauvation i/c all comp as S.I No 251 |
| 2 | Earthwork in filling cartage upto 3km. i/c all comp |
| 3 | Plain cement concrete 1:6:12 (1cement:6fine sand:12 graded aggregate 40mm. Nominal size) including supply of all materiales, labour & T&P etc. compacted by vibration including curing for 14 days work in foundation as si no – 273 |
| 4 | First class brick work in 1:4 cement and fine sand of 1.25 F.M mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work as si no. -305(a) |
| 5 | M-150 class B/W in 1:3 cement with c-sand i/c all comp as S.I No-307 in superstructure |
| 6 | Furnishing and placing reintforced cement concrement in super structure as per drawing and Technical Specifications.M20 (1:2:4).S.I.NO.(283) |
| 7 | Supplying fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and Technical Specifications clauses.S.I.NO.(504) |
| 8 | Plastering with cement mortar (1:4)12 mm thick on brickwork in substructure/superstracutre .S.I.NO.584 |
| 9 | Providing and fixing of 110 mm dia on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(DSR - 12.41.2) |
| 10 | Finishing wall with white based putty i/c all comp DSR 13.80 |
| 11 | Finishing wall with WPC paint i/c all comp AS S.I No 660+661 |
| 12 | Electrification work (wiring, light, fan etc.) i/c all comp M.R |
| 13 | Providing and fixing precoated galavanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer in charge) 0.50mm (+0.05%) Total coated thickness with zinc coating 120 grams per sqm as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer or both side of the sheet and polyester top coat 15-18 microns sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge the sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of pulnins, rafters and trusses and including cutting to size and shape wherever required AS DSR 12.50 |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, bolted with special shaped washers etc. complete AS DSR no 10.16.1 |
| 15 | 2.5cm (2”) thick 1:1.5:3 plain cement concrete floor with cement approved coarse sand i/c all comp as SOR No 605 |
| 16 | Supply and fixing of shilapath and signboard i/c all comp |
| 17 | Add GST @ 18% |
