Addn/Altn And Spl Repairs To Duty Staff Quarters At At Dmde Officers Mess; 1 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil and removing excavtaed material outside MOD land complete all as specified and as directed. 2 Material and labourprovidin plaing cement Concrete (1:4:8 ) type D2 (using 40 mm gradedstone aggregate) infoundations, filling and mass concrete etc all as specified and as directed. 3 Material and labourproviding reinforced Cement Concrete (1:2:4) type B1 using (20mm graded crushed stone aggregate) as in foundations, footings,foundation beams; plinth beams;bases for columns, etc complete all as specified and as directed. 4 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in excavated soil complete all as directed. 5 Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed in soils 6 Material and labourproviding reinforced Cement Concrete (1:2:4) type B1 using (20mm graded crushed stone aggregate) as in beams, bands and lintels over 1.5m span, cantilevers etc complete all as specified and as directed. 7 Material and labourproviding reinforced Cement Concrete (1:2:4) type B1 using (20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. 8 Material and labourproviding reinforced Cement Concrete Type B1 (1:2:4) type B1 (using 20 mm gradedstone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, waste slab, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 9 Material and labourproviding reinforced Cement Concrete 1:2:4 type B1 (using 20 mm crushed gradedstone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, copings, parapets and railings upto 60 cm in height, chajjas and the like including form work complete all as specified and as directed. 10 Material and labour for use & waste of form workto sides of concrete foundations, footings, bases of columns, and similar work; vertical or to batterforrough finished surfaces of concrete, complete all as specified and as directed 11 Material and labour for use & waste of form work to sides of pillars, posts, struts, piers, columns (Square or rectangular) and stanchions. forrough finished surfaces of concrete, complete all as specified and as directed 12 Material and labour for use & waste of form work to sides and soffits of floor and roof beams, lintels, cantilevers etc, forrough finished surfaces of concrete, complete all as specified and as directed 13 Material and labour for use & waste of form work tosoffits of suspended slabs such as roof slab,floor slab forrough finished surfaces of concrete complete all as specified and as directed. 14 Supply and fixing Mild steel TMT bars 10 mm dia and over cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clipsall as specified and as directed. 15 Supply and fixing mild steel TMT bars 5 dia and over upto and including 10 mm dia, as in stirrups spacers links etc quality conforming toTMT bars complete all as specified and as directed. 16 M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6) complete all as specified. 17 Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified. 18 Rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified. 19 M&L for Preparing newly plastered surfaces and applying two coats of Premium emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls/ceilingover a coat of wall putty to make surfaces smooth complete all as specified. 20 M&L for preparation of Newlyplasteredsurfacesand applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. 21 M&L for light coloured vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor and skirting etc including 15mm thick screed bed in CM (1:6) Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, tiles shall be free from visible defects including dismantling existing tile work with screed bed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed 22 Ditto as item no 20 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM (1:4) and including dismantling existing tile work with plaster complete all as specified and directed. 23 S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement and tiles shall be free from visible defects including dismantling existing tile work with screed bed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE. Complete all as specified and directed. 24 M&L for glazed ceramic coloured tiles in vertical surfaces450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar (1:4) and including dismantling existing tile work with plaster complete all as specified and directed. 25 Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and including dismantling of old windows any specification and hight complete all as specified. 26 Supply & fixing of UPVC windows/ventilators with top hung shutters made out ofprofile width of from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, withpeg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 5 mm thick tinted float glass and including dismantling of old windows/ventilators any specification and hight complete all as specified. 27 Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as dirrected. 28 S&fPressed steel frames Double or Single grue 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. 29 M&L cement concrete(1:3:6) type C2 (using 12.50 mm crushed graded stone aggregate) for filling in steel frames complete all as directed 30 M&L cement concrete (1:2:4) type B1 (using 20mm crushed graded stone aggregate) in bed blocks or holdfasts, copings and kerbs etc complete all as specified and directed. 31 S&F35 mm thick factory made pressed moulded panelled door of single or multi panel texured masonite moulded door fabricated using well seasoned and chemically treated solid second class hardwood styles, rails and panels made out of tubular core bonded with PF synthetic resin confirming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The doors colour, texture design shall be approved by GE complete ass as specified and directed. 32 M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying pink primer and one coat of synthetic enamel paint. 33 S&F factory made solidPVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheetreinforced with M.S. Square tube19mm x 19 mm of gauge complete all as specified and as directed. 34 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed. 35 S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed 36 S&F stainless steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixedwith tinned tacks or galvanised wire staples etc as in panels ofwire gauzed shutter complete all as specified and directed. 37 S&F 150 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, with brass screws complete all as directed. 38 S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts andcomplete all as specified and directed. 39 S&F 200 mm longbrass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed. 40 S&F 150 mm extruded brass handles,fabricated type polishedcomplete all as specified and directed. 41 S&Ffloor door stopper of brass body and tongue and with hard drawn steel spring 140 mm longwith screws complete all as specified and directed. 42 S&FSS cylindrical lock suitable for 30 to 40 mm thick shutter with duplicate keys complete. 43 S&F mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified. 44 S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 45 S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 46 S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed. 47 M&L for providing and fixing PVCfalse ceiling of size 7mm Thick 254x3048mm of grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx 14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace).The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm) x22.5mm and laying false ceiling for services like diffusers grill including cutting, makingopening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing andincluding dismantiling of old board and grid any specification and hight complete all as specified as per direction of Engr in Charge. 48 M&L 18mm thick Plywood 9 layer grade BWR type BB fixed as in cupbords with screw to timber frame work complete all as specified and directed. 49 M&L 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer,s instructions complete all as specified. 50 S&F Soft closingHydraulic regular hingesautomatic closing type suitable for cupboard doors of thickness 1-1.5mmcomplete all as directed 51 S&F stainless steel handles 75mm long made of SS 304 complete all as specified and directed. 52 S&F Stainless steel curtain rod 25 mm dia and 304 grade of standard thickness complete all as directed. 53 S&F Stainless steel Curtain rod brackets (Double Hook) 25mm dia complete all as directed 54 S&F Auto close telescope channel of 304 Grade SS fixed in position with SS screws complete all as directed and specified. 55 S&F Stainless steel Curtain end caps 35 to 40 mm dia complete all as directed 56 M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 57 M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as directed. 58 S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified. 59 M&L Prepration new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified. 60 S & F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked)having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 61 S&F Pre-painted galvalume aluminum zinc coating AZ-150 GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges and valley gutters, fixed with self tapping screws as specified 62 S&F Multicolour double layered black out fabric roller zebra blinds Rolling type including hanging mechanism water resistant, UV protection and printed on blinds DMDE crust for window etc fixed complete all as directed . 63 M&L 18 mm thick granite workas in pillars, display boards, wall cladding and like incl 15 mm thick screed bedding in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitestone including grinding and polishing and rounding of edges complete, all as specified and directed. 64 M&L for rendering 10mm in CM 1:3overconcrete surfaces on RCC roof slab and parapets mixed with Dr Fixit by weight of cement as per manufacturer instruction shall be carried out complete all as specified and directed by Engr-in-Charge. 65 M&L water proofing treatment withpolymeric standard membrane of weight not less than 3kg per sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) laid over primed surface by forced application complete. Shall be fused uniformly by LPG torch flame onhorizontal/vertical/slope surface on roofand appplying two coat of aluminium paint @100ml persqm over APP membrabe complete all as specified and directed by Engr-in-Charge. 66 S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position with walls including enlarging existing hole in slab, beam or parapet etc and making good with cement mortar 1:4 complete all as specified. 67 S&F 150mm PVC (SWR) bends of any radius complete all as directed 68 S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls as in rain water pipes complete all as directed 69 S & F in repairsPVC (SWR) bends 110mm bore of any radius for rain water pipes complete all as directed 70 S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks white (Cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR Part I incl taking down old water tanks 71 S & F as in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete 72 S&F in repairs 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fitting 73 M&L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement. 74 S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with fittings such as bend, branch piece, socket etc with rubber ring joints laid in floors or trenches complete 75 S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with fittings such as bend, branch piece, socket etc with rubber ring joints laid in floors or trenches, fixed to walls etc complete 76 S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement 77 S & F in repairs door closer hydraulically regulated, aluminum body (Die cast), designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg complete all as directed. 78 S&F in repairs vitreous China white wash hand basin size 550 x425 x195 mm (Under counter top type) complete all as specified and directed by Engineer in charge. 79 S&F 32 mm bore dia brass chromium plated waste fitting half threaded complete all as specified and directed by Engineer in charge. 80 S&F 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete. 81 S & F in repairs pillar taps of 15 mm bore fancy type cast copper alloywith capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed 82 M&L 100 mm PVC floor trap with SS grating including jointing to waste pipe fixed in cement concrete typr B-1 (1:2:4) complete all as directed by Engineer in charge 83 S&F in repairs 110 mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors with all fittings (such as bends, elbows, Tee, short pieces, connectors, backnuts, diminishing pieces, caps,plugs and unions etc)complete all as directed. 84 S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) white with PVC flushing cistern 10 litres cap with PVC bend including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete surfaces complete all as directed. 85 S&F in repairs PVC connection 15 mm x 600 mm with both side check nuts and washer complete all as directed. 86 S&F in repairs two way CP brass bib cock complete all as specified and directed by Engineer in charge. 87 S&F in repairs 15 mm bore dia angle valves, cast copper alloy,chromium plated fancy type, screwed down, high pressure, with capastan head, and screwed both ends for iron pipe or for unions. Make: Hindware , or equalent 88 S&F in repairs health faucet complete all as specified and directed by Engineer in charge. 89 S&F in repairs 600x 800 x 5 mm thick fancy looking mirror bevelled edge of selected quality glass fixed with chrome effect screw cap wall hanging set by drilling holes in glass complete in all respect as specified 90 S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed. 91 S&F in repairs 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed 92 S&F CP brass wall mixer 3 in 1 system with provision for over head shower with 115mm long bend pipe , connecting legs & wall flange with hand and over head shower 240x240 mm square with shower arm 600x25x25mmcomplete. 93 S&F stainless steel peg set of 06 hooks all as directed. 94 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish away from MOD land complete all as specified. 95 S&F CP towel rack with brackets 600 mm long complete all as specified and directed. 96 S&F brass chromium plated soap dish double complete in all respect as specified and directed. 97 S&F in repairs glass shelf of size 400x200 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated 150mm lenght brackets on both sides fixed in position complete all as specified and directed. 98 S&F in repairs 20 mm bore ofCPVC pipes SDR 11 & plain and brass fiitingsand fixed complete to wall or laid in floor complete all as directed. 99 Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc. 100 M&L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multi standard FRLS copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed in walls/Ceiling and Terminated to sunken box of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- 101 One light/ Fan/ Bell point controlled by one way modular switch 6 Amps 102 One3 pin 6 Amps switch socket outlet point on independent board 103 One 3 pin socket outlet 6 Amps on the same board with other switches. 104 All as per srl item No 02 here-in-before but with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let complete all as specified and directed 105 S/F modular switchone way 6 amps 1 module 106 S/F modular switchone way 16 amps 1 module 107 S/F modular fan step type regular two module 108 S/F modular bell push 1 module 109 S/F modular socket out let 6 Amps 230 volts AC 3 pin multipurpose type complete all as directed by Engineer-in-Charge. 110 S/F modular socket out let 6A/16A - 2/3 pin combined 2 module, multipurpose type complete all as directed by Engineer-in-Charge. 111 S&F ceiling roses two to three terminals surface backellite type AC 50Hz 230 volts complete 112 Supply and fixing bell, AC, 230 volts, single polecomplete all as specified & directed. 113 Supply and fixing lamp holder, PVC / Polycarbonate type with back platesuitable for batten fittings complete all as specified & directed. 114 Supply only LED bulb 9/10 Watts suitable for B22 white in colour all as specified and directed. 115 Supply and fixing LED lights fitting 1x 20W, 220V, AC batten type fittings with extruded aluminium housing PC diffuser and integrated electronic driver connector block etc and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 116 Supply and fixing LED lights fittings mirror type with high output diffuser 2 feet, 10 watt 220 V AC,batten type fittings with extruded aluminium housing PC diffuser and integrated electronic driver connector block etc and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 117 Supply and fix in replacement of sheet metal enclosures distribution board, single pole and neutral, AC, 240 volt, 8 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wallcomplete all as specified & directed. 118 Supply and fix in replacement of sheet metal enclosures distribution board, single pole and neutral, AC, 240 volt, 4 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wallcomplete all as specified & directed. 119 Supply, fixing, MCB single pole 6 to 32 Amps 240 V, 10 KA C curve complete all as directed by Engr-in-charge 120 Supply, fixing, MCB SPN 40 Amps 240 V, 10 KA C curve complete all as directed by Engr-in-charge 121 Supply, fixing,MCB TPN 63 Amps 240 V, 10 KA C curve complete all as directed by Engr-in-charge 122 M&L for sub main wiring complete with 4 runs of 6.0 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DBsincluding provision of 2 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly completeall as directed by Eng-in-charge 123 Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipemedium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC (1:2:4) type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC (1:3:6) type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. 124 Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volts grade conforming to IS-1554 and ISI marked of cross sectional area 25 Sq mm 4 core size in trenches, on wall, road crossing through protection pipe etc. complete all as specified and directed. 125 Supply and lay pipe galvanized, “Heavy class”, including fittings 25 mm (1”) dia complete all as specified and directed. 126 Supply and Fix Gun metal gate valve 25 mm dia with iron wheel head screwed down both ends for iron pipes, fittings complete all as specified and directed. 127 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. min air delivery 210 CFM with service value6.00 BEE. Five star rated with brushless direct current motor (BLDC) 128 Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame andlouvers complete all as specified and directed. 129 Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed. 130 Supply and install hi wall split units indoor/outdoor complete witil cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR complete all as directed. 131 Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4KVA 132 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and as directed 133 Supply and Fix Buzzer, Ding Dong AC. 230 volts, single pole complete all as directed. 134 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminumhosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete 135 Supplying and fixing 20-32 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A C curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required for ACconnection complete. 136 Supply & Fix recess mounted LED luminaire 36W2x2 , 5700K CCT, luminous efficacy of not less than 120lm/wattdesigned for metric false ceiling type or alongwith frame suitable for Grid ceiling or similar mounting system with concealed or exposed T sections, Glare free light alongwithelectronic driver complete with all accessories prewired and connecting up with three core twister flexible copper conductor cable with suitable size including making good to the disturbed portion of ceiling complete removing unserviceable fittings all specified and directed. 137 S&F pressure pump motor, single phase, 230 volts, 50 Hz, of capacity 0.5 HP complete of 0.5 HP, complete of pressure pumps & system Model no 100B pressurejet including making connections complete all as specified and and directed. Make crompton Car No- Model No CFCHM or equivalent as approved by GE
