Periodical Services For Otm And Md Accn Under Age B/R-I At Bb Cantt Srinagar; 1 M&L for preparation of old distempered surfaces of wallby washing rubbing down and stopping of old distempered surface of wallincluding cornices etc and applying one coat of primer as required and one coat of oil bound distemper (Oil emulsion any tint) on wall over and icluding 1mm thick wall care putty for levellingby air less spray machine (Machanical means) , complete all as specified and directed 2 M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the wall surface, complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. 3 M&L for applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the wall surface, complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. 4 M&L for preparation of old surface ( Plastered or unplastered) of wallsand applying two coatsof water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Litre per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and directed 5 M&L for prepration ofold plastered or unplastered surfaces of wall ,and applying one coat of approved shade of oil emulsion distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre the spray machine should be of reputed manufacturer , complete all as specified and directed. 6 M&L for prepration ofold plastered or unplastered surfaces of walls and applying one coat of cement base paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre the spray machine should be of reputed manufacturer , complete all as specified and directed. 7 M&L for prepration ofold plastered or unplastered surfaces of walls and applying two coats of cement base paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer ,complete all as specified and directed. 8 M&L for prepation of old painted wood and woodbased surfaces of any description over 10 cm width or girth andapplying one coat of synthetic enamelPaint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre the spray machine should be of reputed manufacturer , complete all as specified and directed 9 M&L for prepation of oldpainted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre the spray machine should be of reputed manufacturer , complete all as specified and directed 10 M&L for preparation of existing old surface of footpath,chequred tile, interlocking tile etc and applying two coats of floor guard paint of specified tint using Roller/Brush , complete all as specified and directed 11 M & L for Preparing old decorated surfaces of wallsand applying one coat of white wash, complete all as specified and directed 12 M & L for Preparing old decorated surfaces of ceilings and applying one coat of white , complete all as specified and directed . 13 M&L for Preparing old surface ofwalls and applying one coat of cement base paint , complete all as specified and directed 14 M & L for preparing old surface ofwalls and applying one coat of oil bond distemper , complete all as specified and directed 15 M & L for preparing old surface ofwalls and applying two coats of oil bond distemper, complete all as specified and directed 16 M&L for Preparing old surface ofwalls and applying two coats of cement base paint , complete all as specified and directed 17 M&L for rendering10 mm thick in cm 1:6 on fair faces of brick surfaces or concrete surfaceto be finished even and smooth with out using extra cement including taking down cement plaster on brick or stone walling etc, including raking out joints, haking for key, scrubbing down with water etc, complete all as specified and directed 18 M&L for rendering10 mm thick in cm 1:4 on other than fair faces of brick surfaces or concrete surfaceto be finished even and smooth with out using extra cementincluding taking down cement plaster on brick or stone walling etc, including raking out joints, haking for key, scrubbing down with water etc, complete all as specified and directed 19 M&L for rendering 5 mm thick in CM 1:4 of fair faces of brick work or concrete surfaces for ceilings to be finished even and smooth with out using extra cement ncluding taking down cement plaster on brick or stone walling etc, including raking out joints, haking for key, scrubbing down with water etc, complete all as specified and directed 20 M&L for preparation of new plastered surfaces of walls inculding cornices, pilasters etc and applyingtwo coats of cement base paint smooth finish over one coat of alkiali resitant priming, complete all as specified and directed. 21 M&L for preparation of new plastered surfaces of walls inculding cornices, pilasters etc and applyingtwo coats of Oil Bound Distemper over a coat of primer, smooth finish, complete all as specified and directed 22 M&L preparing newly prepared surfaces of ceiling and applying two coats of Oil Bound Distemper over a coat of primer, smooth finish, complete all as specified and directed 23 M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed 24 M&L for preparation of old steel and steelbased surfaces of any description exc 10cm with or girth and applying one coat of synthetic enamel paint, complete all as specified and directed 25 M&L Preparing old surface ofSurfaces of any description over 10cm girth or width, not otherwise described and applying one coat of plastic emulsionpaint ,complete all as specified & directed. 26 M&L French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat ofwood filler on new works with two or more coats , complete all as specified & directed. 27 Providing and applying 1 mm thick Plaster of paris puttyover plastered surface to prepare the surface even and smooth, complete all as specified and directed 28 M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high with thickpaint, complete all as specified and directed. 29 M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc with thick paint, complete all as specified and directed 30 Material & Labour for Old plaster surfaces of finishing walls with paint of required shade applying Two or more coats of 100% Premium acrylic emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over including 1mm thick wall care putty over Old surfaces complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) , complete all as specified and directed
