|
| 1 | Clearences of grass including sapling girth and removal of rubbish upto a distance of 50 M outside the periphery of area cleared. ( DSR 2.32 ) |
| 2 | Excavation in foundation in ordinary soil, incuding lift up upto 1.50 M and refilling of excavated earth- work into the trenches or into the spaces between the building & sides of foundation trenches including watering and ramming. ( DSR2.1 ) |
| 3 | Providing PCC with 4 cm guage brick ballast & fine sand of 1.25 F:M and cement in proportion of 8:4:1 in raft foundation. ( DSR4.1.8a ) |
| 4 | Providing M-150 brickwork in foundation in 1:4 cement and coarse sand mortar. Item no. ( DSR 6.1.2 ) |
| 5 | Providing RCC work in Footing of columns with 1:1.5:3 mix ratio in M-20 grade RCC work in RAFT foundation( DSR 5.22a ) |
| 6 | Providing RCC work in columns with 1:1.5:3 mix ratio of cement:coarse sand:stone grit(aggregate) excluding of supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I binding wire including shuttering/centering Item no.( DSR 5.22a) |
| 7 | Providing RCC in Tie-Beam in 1:1.5:3 mix ratio M-20 grade Item no.( DSR 5.22a ) |
| 8 | Providng painting on DPC/Tie-Beam with two coats of air blown bitumen VG -10 @ about 1.7kg/sqm. Item no. ( DSR 4.13 ) |
| 9 | Providing 23 cm th. First class brickwork in super- structure in1:4 mix ratio of cement & coarse sand ( DSR 6.4.1 ) |
| 10 | Half brick work 1:4in superstructure of ( DSR 6.13.2 ) |
| 11 | Providing RCC lintel beamabove door/windows in M 20 Grade. item no. ( DSR5.3 ) |
| 12 | Providing RCC earthquake resistance band at lintel level all around the structure in 1:1.5:3 mix ratio with 2cm guage stone grit. (M20 grade) ( DSR 5.22a ) |
| 13 | Providing RCC work with approved coarse sand and 2 cm guage approved stone grit in Roof Slab excludingsupply of reinforcement and its bending but including its fixing and binding the same with 24B.W.G.G.I binding wire and including necessary centering and shuttering etc required for proper completion of work.in M-20 Grade In 1:1.5:3 ratio. ( DSR 5.30 ) |
| 14 | Providing with RCC down beam in roof slab in 1:15:3 mix ratio with approved coarse sand & 2cm guage stone grit excluding supply of reinforcement and its bending but including its fixing and binding the same with 24B.W.G.G.I binding wire and including necessary centering and shuttering etc required for proper completion of work as per specification of NBC/BS ( DSR5.30 ) |
| 15 | Providing M.S. Tor steel in RCC work of column & its footing including binding as per specification & drawing supplied. Overlaps given shall be measured. ( DSR 5.226 ) |
| 16 | Providing 12mm th. Plaster over brickwork walls with minimum thickness not to be less than 10mm in 1:4 mix (cement:coarse sand) ( DSR 13.4.1 ) |
| 17 | Providing 12mm th. Plaster over ceiling with min thickness not to be less than 10mm in 1:4 mix (cement:coarse sand) ( DSR 13.4.1) |
| 18 | Fabrication of MS Book rack ( DSR10.20 ) Providing wood work in frams of doors, windows fix in position ( DSR 9.1.3) |
| 19 | Providing wood work in frams of doors,windowsfix in position ( DSR 9.1.3) |
| 20 | Providing base concrete with brick ballast & cement mix in 1:4:8 ratio. & thoughroughly rammed for compaction. ( DSR 4.1.8a |
| 21 | Providing Vitrified 60x60cm tile for flooring of Corridoor, office, stores & toilet wit (kajaria/somany/city tiles/nitco/asian make) ( DSR11.41a.3 ) |
| 22 | Providing full body vitrified tiles of approved make & color on wall all around upto 1.2 mt. height |
| 23 | Providing & fixing of commercial quality plywood flush door shutters confirming to I.S .Waterproof & bore/termiteproof. Including fixing of wooden cleats &adjustment of hinges, bolts, nuts. ( DSR 9.18.2 ) |
| 24 | Providing & fixing of 5mm th. Glass in window panes cut to size including wastage ( DSR 21.2.2 ) |
| 25 | Filling of earthwork till plinth level ( DSR 2.25 a ) |
| 26 | Providing & injecting chemical emulsion for precons- tructional anti-termite & creating a chemical barrier on top surface of the plinth fillings 6 litres/sq.m and on soil along the perimeter of building with 7.5 ltres per sqm. ( DSR 2.35.3) |
| 27 | Distempring 03 coat oilbound distemper of approved brand & manufacture & required for even shade over & including a primer coat with cement primer of approved brand such as Asian/Birla white/JK White. The surface should be free from mortar droppings & any other foreignmatter, meaning the surface should be smooth & even. ( DSR 13.41.1 ) |
| 28 | Providing & laying Brick coba 12mm thick laid with M-150 class brick batcoba 7.5cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 ratio mixed with water proofing compound spreading cement slurry mixed with aerelic cement. |
| 29 | Providing and fixing 12mm thick plaster of paris (gypsum anhydrous) ceiling tiles up to height of 5 meters above floor level overwooden frame and rendered smooth with plaster of paris (frame work to be measured and paid for separately ) chptr no.12 item no.5 |
| 30 | Mild steel or iron works in small sizes such asholding down bolts hold fast etc. brought to required from including drilling holes rivetting or welding where necessary including supply of steel . Bolts and nuts . 502(a). |
| 31 | Providing and fixing of summerseble pump with pvc pipes t elbo socket ,boring with moter ,starter with switch cable clamp complete item materials providing with side as per market rates . |
| 32 | Supply of good quality wooden chairs |
| 33 | Supply of good quality wooden table |
| 34 | Supply of good quality computer i5 set complete with CPU, monitor , ups, etc. complete item ofhp/dell/lenevo |
| 35 | Supply of lockar |
| 36 | Providing and fixing of Inaugration B.G. stone of size (0.90Mx0.75M)with lettering , painting etc. complete. ( Rates are as per Market rates) |
| 37 | WIRING POINT & SUBMAINS : Wiring point for light with 1.0 sq. mm FR P.V.C. insulated multistand single core copper conductor cable in P V C conduit pipe part concealed in wall & partly laid inslabalongwiththereinforcementbeforeconcreting complete with 1.5 Sq. Mt. copper earth continuity wire & piano type switch and ceiling rose / angle / batten holder on3mmthickphenoliclaminated backelitesheetetc. complete in all respect including matching color wash. |
| 38 | sameasinitemno.1butforfansandfreshairfans(light duty fan). |
| 39 | SameasinitemNo.1butfor5amp.Plugpointwithpiano type switch & socket etc. |
| 40 | Same as in item No. 2 but for Light duty exhaust fans &power plugs. |
| 41 | Supply&wiringofsub-mainwith2Nos.4SqmFRP.V.C. insulated 1100 volts grade multistand single core copper conductor cable in 20 mm diameter heavy duty 2mmthickPVCconduitpartlyconcealedinwalland partlylaidinslabalongwiththereinforcementbefore concreting complete with one number 2.5 Sq. mm. FR PVCinsulatedmultistandcopperconductorcableas earth continuty drawn in donduit complete in allrespects. (i) 2x2.5 sqm with 1.5mm as earth continuity. |
| 42 | 2x4.0sqm with 2.5mm as earth continuity. |
| 43 | Construction of recess distribution board (Switch board) of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, t & p, etc. req. for proper completion of work. |
| 44 | Erection & Testing of ceiling fan and regulator for room height upto 3.5 mtr. Including supply of 3 mm thick G.I. downrod19mmdiadulypaintedcompleteinall respects. |
| 45 | Erection & Testing ofExhaust fan on the existing hole withsuitablesizeofragboltsnutsandwashersetc. complete in all respects. |
| 46 | Supply & fixing of power plug with 15A/250V flush type switch type socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size bakelite sheet machine screws & cup washers. |
| 47 | S/F of hexagonal fan box with hexagonal side of approx. 80mminlengthfabricatedflow16SWGM.S.sheet incorporating with 10 mm dia M.S. round bar duly bent forsupportingfanhangerdulypaintedwithredoxide and screwing arrangement with wiring conduit laid in theR.C.C.roofbeforeconcretingalongwithsupplyofall materials,labour,T&Petc.forpropercompletionof work. |
| 48 | S/F fan hook fabricated from M.S. rod for ceiling fans. |
| 49 | Add for fixing of tube fitting as pendent with two number 19mmdia,16gauge ridigsteel conduitdouble check nuts, spring loaded flanges or M.S. hook fabricated from 25 mm x 3 mm flat ironduly grouted in the ceiling upto3.5heightofceiling,includingpaintingwithsynthetic enamel paint. Alongwith supply of all materials, labour, T& P etc. required for proper completion of work. |
| 50 | S/F of single light wall bracket on mathcing M.D.F.E.G. boardbasewithC.F.L.etc.completeinallrespects(Cat. B) |
| 51 | S/FofceilingfittingmadeofbrassfixedonmatchingM.D.F.E.G. board base including connections with existing outlet. The base of ceiling fitting shall be fabricated from 22 gauge CRCA sheet in square shape finishedwithblackmattsurfacecompletewith3mm thick export quality acrylic moulded cover & heavy duty brass holder of Kinjal / or any other approved make |
| 52 | Supply&fixingof factorywiredHPF surfacetype flourescent tube light fitting with mirror optics suitable for fluorescenttubesincludingtubesetc.completeinall respect. Category A |
| 53 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 54 | WIRING POINT & SUBMAINS : Providing & fixing white vitereous china water closet squatting pan ISI markedIndiantypeW.C.pan)with100mmsandcastironPorS trap,10/12.5litersPVClowlevelflushingcisternwithfittings& brackets40mmdiaC.P.flushpipewithfitting&clamps,20mm opver flow pipe with specials and mosquitoy proof coupling of approviedmunicipaldesign,paintingwhereeverrequiredincluding cutting&makingdoodthewalls&floorswhererequired.Orissa Pattern W.C. pan of size 580x440m with integral type foot rests flushpipe and over flow arrangement. |
| 55 | Providing&fixingwhitevitereouswashbasinwithC.I.brackets paintedwhite,15mmC.P.brasspillartaps,C.P.brasschainwith rubberplug,32 mmC.P.brasswasteofstandardpatternincluding cutting & making good the walls wherever required. a)FlatbackwashBasinsize550x400mmwithsingle15mmC.P.brass pillar tap. |
| 56 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basinincluding PVC waste fittings complete. a) 32 mm dia |
| 57 | Providing & fixing 600x450 mm bevelled edge mirror of superior glass(of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and wahsers. |
| 58 | Providing&fixing60x2cm.C.P.brasstowelrailcompletewithC.P. brass brackets fixed to wooden cleats with C.P. brass screw. |
| 59 | Providing and fixing white vitreous china toilet paper holder. |
| 60 | SOIL WASTE & VENT PIPES AND FITTINGS - II :Providing & fixing soil, waste and vent pipes. a) 100 mm dia cast iron S & S pipe. |
| 61 | Providingleadcaulkedjointstosandcastiron/centrifugallycast (spun) iron pipes & fitting of diameters. a) 100 mm |
| 62 | Providing & fixing M.S. holder bat clamps of approved design to sand castiron/centrifugallycast(Spun)ironS&Spipeembededin& includingcementconcreteblocks10x10x10cm.of1:2:4mix(1Cement : 2 Coarse : 4 graded stone aggregate 20 mm nominal size). Including cost of cutting holes & making good the walls etc. a) for 100 mm dia pipe |
| 63 | Providing&fixingcastirontrapofselfcleansingdesignwithor without ventarm complete, including cost of cutting & making good thewalls & floors. a) 100 mm inlet & 75 mm outlet |
| 64 | Providing & fixing sand cast iron coller. a) 100 mm dia |
| 65 | Providingandfixingsingleequalplainjunctionofrequireddegree. (Plane \"Tee\") a) 100x100x100 mm |
| 66 | b) 75x75x75 mm |
| 67 | Providing and fixing terminal guard a) 100mm |
| 68 | b) 75mm |
| 69 | Providing and fixing plain sand cast iron \"S\" or \"P\" sanitary bend. a) 100mm |
| 70 | b) 75mm |
| 71 | Providingandfixingbendofrequireddegreewithaccessdoor, insertionrubberwasher3mmthick,boltsandnutscomplete(door \"Tee\") a) 100mm |
| 72 | b) 75mm |
| 73 | WATER SUPPLY PIPES AND FITTINGS - III :Providing&fixingG.I.pipescompletewithG.I.fittings&clamps including cutting & making good the walls etc. (internal work) a) 15 mm dia nominal bore. |
| 74 | b) 20 mm dia nominal bore. |
| 75 | c) 25 mm dia nominal bore. |
| 76 | Providing & fixing brass gate valve with C.I. wheel of approved quality(screwed end) c) 25 mm dia nominal bore |
| 77 | PaintingG.I.pipesandfittingswithwhitepaintoverareadymixed priming coat, both of approved quality for new work. a) 15 mm dia nominal bore. |
| 78 | b) 20 mm dia nominal bore. |
| 79 | c) 25 mm dia nominal bore. |
| 80 | Providingandfixing45cmlongunplastifcisedPVCconnectionpipe with brass unions. a) 15 mm dia nominal bore. |
| 81 | Providing&fixingCPbrassbibcock(Tap)ofapprovedquality conforming to IS 8931. |
| 82 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 83 | Providing&fixingC.P.brassanglevalveforbasinmixerandgyser points of approved quality conforming to IS 8931 |
| 84 | Providing&fixingC.P.brassstoccock(concealed)ofstandard design and of approved make conforming to IS : 8931. |
| 85 | Providing and fixing sand cast iron jali (grating) for floor / nahani trap. |
| 86 | ProvidingandfixingballFloatingvalve(brass)ofapprovedquality complete. (High or low pressure with plastic floats). |
| 87 | Providing and placing on terrace (at all floor levels) polythylene water storagetankofapprovedbrandandmanufacturewithcoverand suitablelockingarrangementandmakingnecessaryholesforinlet, outlet and overflow pipes but without fittings and capacity 1000 litre (1 |
| 88 | Excavatingtrenchesinallkindofsoilofrequiredwidthforpipes, cablesetc.includingexcavationforsocketsanddressingofsides, rammingofbottoms,depthupto1.5m.Includinggettingoutthe excavatedsoil&thenreturningthesoilasrequired,inlayersnot exceeding 20cm in depth including consolidating each deposited layer by ramming,watering,etc.&disposingofsurplusexcavatedsoil as directed within a lead of 50m. |
| 89 | Providinglayingandjoiningglazedstonewarepipesgrade\"A\"with stiff mixture of cement mortar inthe proportionof 1:1(1 cement:1 fine sand) including testing of joints etc. complete. a) 100 mm diameter |
| 90 | b) 150 mm diameter |
| 91 | Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.a) 100 mm diameter |
| 92 | b) 150 mm diameter |
| 93 | Providing and fixing square mouth S.W. Gully trap grade \"A\" complete withC.I.gratingbrickmasonrychamberwithF.P.S.bricksofclass designation 75 and water tight C.I. cover with frame of 300x300mm. Size(inside)theweightofcovertobenotlessthan4.50Kgand frame to be not less than 2.70 Kg. as per standard design. a) 150 x 100 mm size P type |
