|
| 1 | EXCAVATION & EARTHWORK |
| 2 | Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed |
| 3 | B/R WORKS |
| 4 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed |
| 5 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed |
| 6 | Demolition of reed, lathing, single or double including battens and plaster or chiken wire lathing complete all as specified and as directed |
| 7 | Dismantling of timber scantling 40sqcm and over in section, in any position in unframed works complete all as specified and as directed |
| 8 | Dismantling wall and ceilingboards (fibre, pulb, insulation, etc.) or insulation boards slabs/blankets of any thickness including cover fillets complete all as specified and as directed |
| 9 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering /wall cladding complete all as specified and as directed |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 11 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed |
| 12 | Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces |
| 13 | Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces |
| 14 | Taking up or down 15mm bore steel water tubing and connections from any location / position including sorting, stacking, cleaning serviceable pipes and disposing off other, etc. complete all as specified and as directed |
| 15 | Taking up or down 20mm bore steel water tubing and connections from any location / position including sorting, stacking, cleaning serviceable pipes and disposing off other, etc. complete all as specified and as directed |
| 16 | S&F in position steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer, etc. using ERW or induction butt welded tubes / SHS conforming to IS-1161-2014 / IS-4923-1997 grade St-240 complete all as specified and as directed |
| 17 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290 grade E-165 complete all as specified and as directed |
| 18 | S&F screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 11 to 15mm complete all as specified and as directed |
| 19 | S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W grade-E -250, quality \"B\" complete all as specified and as directed |
| 20 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 21 | M&L for mild steel TMT bars grade Fe-500D, 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 22 | M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders securing with clips complete all as specified and as directed |
| 23 | M&L for use and waste formwork to sides of concrete foundations, bases of columns, rafts, raft beams, plinth beams and similar works, vertical or to batter, for rough finished flat surfaces of concrete complete all as specified and as directed |
| 24 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed |
| 25 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 200mm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 100mm but not exceeding 200mm wide complete all as specified and as directed |
| 26 | M&L for brickwork with sub-class \"B\" bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed |
| 27 | M&L for brickwork with sub-class \"B\" bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed |
| 28 | M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in floors, plinth protection, pavings, etc. surface finished even and fair, laid in alternate bays/panels and joints filled with bituminous mix of 1 part bitumen and 3 part of sand complete all as specified and as directed |
| 29 | M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in bed blocks, back filling of steel frame and holdfasts, etc. including necessary formwork complete all as specified and as directed |
| 30 | M&L for providing RCC (nominal mix) 1:1.5:3 type A1 using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles, mass concrete, etc. complete all as specified and as directed |
| 31 | M&L for providing RCC (nominal mix) 1:1.5:3 type A1 using 20mm graded aggregates as in columns, posts, piers, pillars, struts, etc. complete all as specified and as directed |
| 32 | M&L for providing RCC (nominal mix) 1:1.5:3 type A1 using 20mm graded aggregates as in beams, cantilevers, lintels, etc. over 1.5m long complete all as specified and as directed |
| 33 | Notes for serial item Nos. 33 to 35: (a) Mix design shall be conforming to relevant IS. Design mix shall be got designed from National Test House, SEMT Wing CME, Regional Research labs, IITs, National Institutes of Technology, Command Test Laboratory and Govt Engineering Collage and shall be got approved by the GE. Cost of obtaining design mix shall be included in the quoted rates (b) The Contractor shall use only one type brand of cement for entire structural/reinforced concrete work. In the event of contractor desiring use of any different brand of cement, fresh design mix shall be carried out and submitted for approval without any extra cost to the Govt.(c) Reinforcement steel will be measured separately under respective items herein |
| 34 | M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound \"A\" complete all as specified and as directed |
| 35 | M&L for 40mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregates) as in damp proof course, roof padding, haunching, roof kerb or similar works including applying 3kg/sqm neat cement slurry complete all as specified and as directed |
| 36 | M&L for preparation of masonry / concrete wall surfaces and applying1mm thick wall care putty rubbed with sand paper for making surface smooth and even including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed |
| 37 | M&L rendering 15mm thick, in cement mortar (1:4) on walls / concretesurfaces, etc. in two layers (10+5mm) finishing layer mixed with integral water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directedNote: WPC will be measured and paid separately under respective item herein |
| 38 | M&L rendering 15mm thick, in cement mortar (1:6) on walls / concretesurfaces, etc. finished even and fair without using extra cement complete all as specified and as directed |
| 39 | Supply only integral water proofing compound all as specified |
| 40 | S&F 3 way sliding anodised aluminium glazed window shutter with frame with the following specifications complete all as specified and as directed.(a) Frame 50x65x1.5mm thick(b) 35x35x1.5mm Z section in stiles, rails(c) 50x35x1.5mm T section mullion(d) PVC gasket and with 4.8mm thick coloured glass pane one side mirror finished, area not exceeding 0.5sqm each with aluminium handles and necessary locking arangements(e) Stainless steel wire mesh for mosquito proofing arrangement all as directed |
| 41 | S&F 2 way sliding anodized aluminium glazed ventilator shutter with frame consists of following specification complete all as specified and as directed(a) Ventilator frame 2 track of size 60x25x1.5mm thick(b) Stiles and rails of size 35x25x1.5mm(c) 35x35x1.5mm T section mullion(d) PVC gasket with 4mm thick tinted glass, including aluminium handles with necessary locking arrangement |
| 42 | Notes for item Nos. 41 & 42: (a) Area of opening shall only be considered for meaurement purposes (b) All necessary accessories including tinted glass, PLPB, fittings, fixtures for assembling / fixing as per drawing complete shall be included in the quoted rate |
| 43 | S&F false ceiling with anodised aluminium snap grid frame work for false ceiling comprising of perimeter channel 0.55mm thick with 2Nos. unequal flanges of 20 & 30mm and web 27mm fixed to surrounding wall using nylon sleeves at 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m in length) of 0.55mm thickness, having curled web of 50mm and flange 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips at 457mm c/c to 6mm dia GI hangers (1.2m long) adjusting level fixed to roof slabs by means of ceiling cleats made of GI flat 40x3mm, 60cm long and expansion hold fasteners 12.5mm dia 40mm long including 4mm thick pre-painted decorative non-asbestos fibre cement building boards fixed with screws / laid / inserted on snap grid complete all as specified and as directed |
| 44 | S&F 100mm long MS butt hinges of selected quality complete all as specified and as directed |
| 45 | S&F 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed |
| 46 | S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed |
| 47 | S&F in repairs 300mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed |
| 48 | M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound \"A\" complete all as specified and as directed |
| 49 | S&F in repairs 20mm dia fancy type chromium coated (tint as approved) MS curtain / drapery rods, etc. of rod wall thickness 1mm (min), including pair of CP MS brackets, holders with funnel at ends complete all as specified and as directed |
| 50 | S&F in repairs brackets for tubular towel rail/curtain rod of 20mm dia, complete all as specified and as directed. |
| 51 | S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed of the following bores: |
| 52 | 15mm |
| 53 | 20mm |
| 54 | S&F in repairs single piece vitreous China wash down water closet pan (Pedestal pattern), white, with \"P\" or \"S\" trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directedMake: Cat part No. 20125 of Hindware or equivalent of Kohler, Duravit, Grohe, Roca, Jaquar |
| 55 | S&F in repairs wash hand basin, vitreous China, coloured,flat back or angle type, of size 630x450mm, of approved design, cutting for and pinning in ends of brackets with coupling and including PVC connection 60cm key with brass union complete all as specified and as directed |
| 56 | S&F in repair sink with drainage board of kitchen sink overallbowl size 410x330x160mm, made of stainless steel 1mm thick for kitchen with plugs, washer and waste pipe including duly fixing to cantilever brackets and connection union to pipe, filling joints with wall in white cement complete all as specified and as directed |
| 57 | S&F 15mm PVC connections, 450mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed |
| 58 | Supply and fix in repair Grating square 150 mm size of PTMT (Minimum weight 100gms) omplete all as specified and directed. |
| 59 | S&F in repairs 32mm dia waste fitting, brass CP for glazed ware sinks, basins etc with long screwed shanks and fly nut, flange end bedded in red lead cement and other end fixed,complete all as specified and as directed |
| 60 | S&F in repairs for 15mm bore brass CP basin mixer, of approved design, for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed |
| 61 | S&F in repairs for 15mm bore brass CP sink mixer, of approved design, for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed |
| 62 | S&F in repair brass chromium plated bottle traps suitable for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union, cap, etc. and fixed complete all as specified and as directed |
| 63 | S&F in repairs 15mm dia angle vlave, cast copper alloy, fancy type, screwed down,high pressure, with crutch or butterfly handle, concealed type, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed |
| 64 | S&F in repairs health faucet, 15mm bore, brass head chromium plated, telephone type, with CP arms, flexible pipe(ABS body) with 1.2m long stainless steel flexible braided hose tube and wall hook of approved finish complete all as specified and as directed |
| 65 | S&F in repairs 600x450mm full sized bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 66 | S&F in repairs towel rail, 20mm dia, brass chromium plated, 600mm long with fancy type with brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified and as directed |
| 67 | S&F stainless steel CP soap dish, 160x160x90mm size, of approved design, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed |
| 68 | S&F in repair toilet paper holder with flap recessed type stainless steel complete all as specified and as directed |
| 69 | S&F in repairs 15mm bib taps, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed |
| 70 | S&F in repairs for 15mm bore brass CP wall mixer, 2 in 1, of approved design, for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed |
| 71 | M&L for 20mm thick granite stone slab, of any type, table rounded, rubbed and polished, in cills, cooking platforms, partitions and the like set in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed |
| 72 | M&L for providing edge moulding to 18-20mm thick granite stone of counter vanities etc including polished to edge to give high gloss finished etc, complete all as specified and as directed. |
| 73 | M&L for preparation of new masonry / concrete wall surfaces and applying two coats of acrylic distemper (tint as approved) over and including one coat of alkali resistant walll primer with all necessary staging, scaffolding, etc. as required complete all as specified and as directed |
| 74 | M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed |
| 75 | M&L for preparing of new wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed |
| 76 | M&L for preparation of new plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungus resistant, dirt resistant, exterior paint (of approved tint, company depot tinted) with silicon additives @1.43litre/10sqm over a priming coat of exterior primer applied @0.90litre/10sqm complete all as specified and as directed |
| 77 | M&L for vitrified tiles, light shade, 10mm thick, joint free, edge cut, area of each tile exceeding 0.18sqm but not exceeding 0.36sqm, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in CM (1:6) (rate shall be included) complete all as specified and as directed |
| 78 | M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11sqm but not exceeding 0.18sqm each, 7 to 8mm thick of superior quality as in floors, etc. laid over 15mm thick screed bed in CM (1:6) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed |
| 79 | M&L for glazed ceramic tiles, coloured, of sie 450x300x7mm or 350x250x7mm thick of superior quality as in skirting, dado, etc. laid over 10mm thick backing coat in CM (1:4) (rate shall be included) pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed |
| 80 | S&F pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 81 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 82 | S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain / printed coloured PVC sheet (as approved) reinforced with MS square tube all as per specifications and drawing given in SSR Part-I 2009 all as per manufacturer\"s instructions and making good the disturbed surfaces complete all as specified and as directed |
| 83 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8B.2.1 of MES schedule Part-II (2020) complete all as specified and as directed |
| 84 | S&F 35mm thick 2nd class hard wood glazed and skeletonshutters, open rebated without sash bars, with plain, chamfered or rounded, mitred, any number of panels, prepared to receive glass, gauges, etc. edges chamfered or rounded, sizes of members of shutters as specified in clause 8.24(a) of SSR Part-I, supplied and fitted to chowkats complete all as specified and as directed |
| 85 | M&L 35mm thick factory made plain framed paneled door shutter (any number of panels) 2nd class HW rail and style with lock rail and panels of 12mm thick ISI marked veeneered particle board with commercial veeneering on both faces, with size of rail and style shall be as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 86 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 87 | E/M WORKS |
| 88 | Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed |
| 89 | M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following: |
| 90 | One light point controlled by one 5A one way switch |
| 91 | One ceiling fan / exhaust fan point controlled by one 5A one way switch |
| 92 | One switch socket outlet 3 pin 5A controlled by one switch on independent board |
| 93 | One switch socket outlet 3 pin 5A controlled by one switch on same board |
| 94 | Onebell/buzzer controlled by one bell push independent |
| 95 | M&L for point wiring with 4sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for 3 pin 15A switch socket independent outlet complete all as specified and as directed |
| 96 | S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed |
| 97 | S&F switch piano flush modular type, single pole, ISI marked, one way 6A, 1 module, 230V complete all as specified and as directed |
| 98 | S&F switch piano flush modular type, single pole, ISI marked, one way 16A, 1 module, 230V complete all as specified and as directed |
| 99 | S&F socket outlet, 2/3 pin, 6A modular type, ISI marked, combined 2 module, 230V complete all as specified and as directed |
| 100 | S&F socket outlet, 2/3 pin, 6/16A modular type, ISI marked, combined 2 module, 230V complete all as specified and as directed |
| 101 | S&F USB charging socket modular 5 Amp single pole, complete all as sepcified and as directed. |
| 102 | S&F in repair bell push modular of 6 Amp single pole, one way 1 module, complete allas specified and as directed. |
| 103 | S&F modular flush box with cover plate and frame, white, ISI marked complete all as specified and as directed of the following modules: |
| 104 | 3 modules |
| 105 | 6 modules |
| 106 | 8 modules |
| 107 | S&Fmodular single phase starter 20A with green red push button for A/C connection complete with ON OFF testing , complete all as specified and as directed. |
| 108 | M&L for submain wring using proper colour codingwith 2 runs of single core, PVC insulated,FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 6sqmm and 1 run of 4sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC casing capping 32mm wide, heavy duty, ISI marked concealed in wall/ceiling/roof, etc. with all required accessories complete all as specified and as directedNotes:(i) 02 runs of 6sqmm main cable, 1 run of earth conductors and 1 run of PVCconduit shall be measured as one length(ii) Separate casing shall be used for each sub-main wiring circuit irrespective of numbers of wire(iii) The minimum size of casing shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of casing as per requirement at site |
| 109 | Supply, fixing, commissioning and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductors, 1100V grade 3.5 core 25sqmm laid in trenches/fixed to wall/under road/drawn through pipes etc. with copper cable glands and copper thimbles including taking down old unsv cables, complete all as specified and as directedNote: Excavation and earthwork will be measured and paid under respective items herein |
| 110 | S&F steel water tubing, medium grade, 25mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for cable protection, etc.including taking down old unsv GI pipe, complete all as specified and as directed |
| 111 | S&F steel water tubing, medium grade, 32mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for cable protection, etc.including taking down old unsv GI pipe, complete all as specified and as directed |
| 112 | S&F in repairs fan hook fabricated in MS flat iron 25x6mm 300mm long, bent to shape with drilled holes to accommodate nuts suitable for hanging ceiling fans, entirely painted with two coats of synthetic enamel paint,including taking down old unserviceable existing hook, complete all as specified and as directed |
| 113 | S&F sheet metal enclosures for 8 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down old damaged DB and disposing off complete all as specified and as directed |
| 114 | S&F sheet metal enclosures for 4 way MCB DB, 415V, TPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down old damaged DB and disposing off complete all as specified and as directed |
| 115 | S&F in repairs MCB SP, 240V, 10 to 40A, 10kA, 50Hz, C curve complete all as specified and as directed |
| 116 | S&F in repairs MCB isolator SPN, 240V, 40A, 10kA, 50Hz, C curve complete all as specified and as directed |
| 117 | S&F in repairs MCB isolator SPN, 240V, 6-32A, 10kA, 50Hz, C curve complete all as specified and as directed |
| 118 | S&F in repairs MCB isolator TPN, 240V, 63A, 10kA, 50Hz, B curve complete all as specified and as directed |
| 119 | S&F wall surface mounted, compact LED box type, 4ft long, light fitting 1x20W all accessories prewired with 20W LED lamp and connecting with three core flexible copper conductor cable of suitable size from ceiling rose including taking down and disposing off old fitting complete all as specified and as directed |
| 120 | S&F wall surface mounted, compact LED box type, 2ft long, light fitting 1x20W all accessories prewired with 10W LED lamp and connecting with three core flexible copper conductor cable of suitable size from ceiling rose including taking down and disposing off old fitting complete all as specified and as directed |
| 121 | S&F building security light, LED luminaire 25W IP 66 with LED lamp, driver, etc. with all accessories pre-wired and connecting with 3 core flexible copper conductor cable drawn through PVC conduit of size 20mm and taking down and disposing off old fitting completeall as specified and as directed |
| 122 | S&F angle bracket of 25/32mm dia GI tube medium grade for fixing building security/street lightof 1.25m long including taking down and disposing off old , complete all as specified and as directed. |
| 123 | S&F LED decorative light fitting, 8.0W, indoor type, sleek classic wall light, antique finish, suitable for living / bed room lighting, of approved design with 7.5W LED lamp, with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable and including taking down and disposing off old fitting complete all as specified and as directed |
| 124 | S&F for exhaust fan 230V AC single phase complete with louvers and shutters 250mm sweep and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts and taking down old / unserviceable fan from any location / position and disposing off complete all as specified and as directed |
| 125 | S&F ceiling fan 1200mm sweep, of colour & design as approved, 230V, minimum air delivery 210CFM with service value 6.00 BEE 5 star rated, with blades, down rods and accessories complete all as specified and as directed |
| 126 | M&L for earthing using GI earthing wire with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth lead wire 4mm dia extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 15mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications, taking down and disposing off old earthing complete all as specified and as directed |
| 127 | Notes for serial item No.126: (i) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included(ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item(iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge |
