|
| 1 | UNRESTRICTED AREA |
| 2 | S&F in repair brass chromium plated tubular towel rail 20mm dia \"D\" type 60cm long between flanges complete all as specified and directed. |
| 3 | S&F in repair 18mm rigid prelaminated coloured solid celuka board fixed asin cup board , Cabinate ,Drawer etc as per manufacturer specification complete all as specified and directed. |
| 4 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 5 | S&F in repair curtain rod stainless steel decorative type 20 mm diaincluding fixing bracket and end knobs complete all as specified, complete all as specified and directed. |
| 6 | S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanisedwidth of flaps (when open) 30 mm complete all as specified and directed. |
| 7 | S&F in repair looking mirror 600 x 450mm bevelled edges of selected quality glass mounted on 5 mm thick PVC Sheet with PVC frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed. |
| 8 | Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and directed. |
| 9 | S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed. |
| 10 | S&F in repair 15mm bore bib tap cast copper alloy chromium plated with fancy type crutch or butterfly handels screwed down for iron pipes or for brass ferrule complete all as specified and directed. |
| 11 | S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, complete all as specified and directed. |
| 12 | S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed. |
| 13 | S & F in repair chromium plated bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed complete all as specified and directed. |
| 14 | S&F in repair 15mm bore stop valves/ Angle cock chromium plated screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed. |
| 15 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 16 | All as per srl item No. 1.14 above but length of 600mm long complete all as specified and directed. |
| 17 | S & F in repair Health Faucet size 15 mm chromium plated and 1.2 m long with flexible tube etc ccomplete all as specified and directed. |
| 18 | S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed. |
| 19 | S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed. |
| 20 | S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar 1:6, complete all as specified and directed. |
| 21 | S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap and make good to match with the existing surface of floor complete all as specified and directed. |
| 22 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe complete all as specified and directed. |
| 23 | S&F in repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 24 | S&F in repair vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets complete all as specified and directed. |
| 25 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipecomplete all as specified and directed. |
| 26 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe complete all as specified and directed. |
| 27 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed. |
| 28 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 40mm bore pipe complete all as specified and directed. |
| 29 | Supply & laying of CPVC pipes 16 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed. |
| 30 | Supply & laying of CPVC pipes 20 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed. |
| 31 | S&F 25mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed. |
| 32 | S&F 40mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed. |
| 33 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 34 | S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed. |
| 35 | S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed. |
| 36 | S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 37 | Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site complete all as specified and directed. |
| 38 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltrhoisted and fixed in position complete all as specified and directed. |
| 39 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position complete all as specified and directed. |
| 40 | S&F in repair 15mm bore bib tap Standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 41 | S&F in repair PVC waste pipe size 32 mm flexible with coupling for WHB/Sink/Urinal etc complete all as specified and directed. |
| 42 | S&F in repair CP bras soap tray/dish of size 100 x 125 mmof approved make etc complete all as specified and directed. |
| 43 | S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 44 | S&F in repair of kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed. |
| 45 | Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and reconnecting and refixing in position capacity of tank exc 500 and n.exc 1000 ltr. (cleaning, repairing etc measured separately) complete all as specified and directed. |
| 46 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank exc 250 ltrs but n.exc 500 Ltrs complete all as specified and as directed. |
| 47 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank exc 500 ltrs but n.exc 1000 Ltrs complete all as specified and as directed. |
| 48 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 49 | M&L Brick work using old size bricks with sub class \"B\" bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 50 | Ditto all as per Srl item No 1.48 above but except brick complete all as specified and directed. |
| 51 | Taking down cement plaster or cement lime plaster or wall tiles of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 52 | M&L 15mm thickplasterin CM 1:4 on brick wall finished even & smooth w/o using extra cement in patchesall as specified and directed by Engr-in-charge. |
| 53 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 54 | Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 55 | M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.16 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) over and including screed bed 15mm thick rendering in CM 1:6 complete all as specified and directed. |
| 56 | M&L vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed. |
| 57 | Ditto all as persrl item No. 1.55 above but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed. |
| 58 | M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and directed. |
| 59 | M&L Cudappah stone slab on cooking platform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete all as specified and directed. |
| 60 | M&L 18-20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed. |
| 61 | M&L for PCC (1:2:4) type B-0 (Using 12.50 mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed. |
| 62 | Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each |
| 63 | Taking down chowket or frame areaexceeding 1.5 Sq mtr but not exceeding 4.00 Sq mtr each complete all as specified and directed. |
| 64 | Taking down Shutter onlyexc 1 sqm and n.exc 2 Sqm each complete all as specified and directed. |
| 65 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specificationincluding making good to the disturbed surfacesand matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etccomplete complete all as specified and directed. |
| 66 | S & F factory made 100% Solid Wood plastic composite (WPC) Door frame 90mm x 45mm made from wood plastic composite (Single Extruded Process) material with density 780Kg/Cbm & and ISO 9001 - 2015 Certified Company, all as per specification drawings and as directed by the Engineer-in-Charge Door should be water proof, Termite Proof, Fire Retardant & having good screw holding capacity including making good to the disturbed surfacescomplete all as specified and directed. |
| 67 | S&F 30 mm thick PVC flush door shutter having one side lamination with5mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles wa well as top, bottom & lock rail.MS frame shall have a coat of metal primer of approved make and manufacturer.The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+_0.25) thick Prelam PVC sheet of denisity 600 Kg/Cbn manufacured by an ISO-9001-2015 certified company, on both side of the inside panel etc complete all as specified and directed. |
| 68 | S&F of 30mm thick Wiremess Solid Pvc Door consisting of frame made out of M.S. Tubes of 19 guage thickness and size of 19mm X 19mm for stiles and 15mm X 15MM for top, bottom & lock rail. M.S. Frame shall have a coat of metal primer of approved make & manufacturer. 19mm x 19mm M.S. squqre tubes shell be covered with heat moulded plain sheet \"C\" channel made from 5 mm (+0.25) thik PVC sheet of density 6 KG/Cbm Manufactured by an ISO-9001-2015 certified Company, of size 30 mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be bent in 90o angle on either side forming stiles, one of the 90o bend edge is cut from stiles as well as rails to nail from inner side of door to hide wiremesh fixing steel screws. 5mm (+0.25)thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on both side to form lock rail. An additional 5mm (+0.25) thick PVC strip of 20mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent cement adhesive. Panel will be of /gi/SS wiremesh of 24 gauge to be fitted inside area of stiles & rails. The wiremesh in top, bottom & rock rail is sealed with 15mm X15mm tube with steel screw of size 13/6mm. 10mm (5mm x 2 Nos) thick PVC strip of 25mm width is to be stuck & nails on both side of GI wiremesh interior at the top, bottom & rock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6mm size steel screw etc. including making good to the disturbed surfacescomplete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings. |
| 69 | S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window,ventilator frame,Louvers with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfacesand matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etccomplete, as spd . |
| 70 | S&F powder coatedaluminum window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. including making good to the disturbed surfaces complete all as specified and directed. |
| 71 | S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 72 | M&L preparation of new surface of steel and applying two coat of synthetic enamel pinting over a coat of red oxide primer over 10 cm width or girth complete all as specified and directed. |
| 73 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed. |
| 74 | S&F 4mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators complete all as specified and directed. |
| 75 | S&F 100 mm long aluminium butt hinges alloy with galvanised ms hinge pin, anofised and fixed type C-21complete all as specified and directed. |
| 76 | S&F 150mm long aluminium anodised barrel tower bolt and fixedcomplete all as specified and directed. |
| 77 | S&F 150mm long aluminium anodised handle cast type and fixedcomplete all as specified and directed. |
| 78 | S&F 250mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 79 | M&Lfor applying coat of putty on wall/ceiling including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spots complete all as specified and directed. |
| 80 | M&L for applying two coat of distemper Oil emulsion over a one coat of Primer on putty surfaces white or tinted complete all as specified & directed. |
| 81 | M&L for preparation of old wall surfaces including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white washcomplete all as specified and directed. |
| 82 | M&L for preparation of old decorated surfaces of ceilingincluding brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white washcomplete all as specified and directed. |
| 83 | M&L for preparation of old treated surfaces of wall and applying one coat of distemper Oil emulsion white or tintedcomplete all as specified and directed. |
| 84 | M&L for subsequent coat of distemper oil emulsion white or tinted over one coat applied under Srl item 1.82 above complete all as specified and directed. |
| 85 | M&L for one coat of synthetic enamel paint on old decorated wooden surfaces over 10cm width or girth including preparation of surfacescomplete all as specified and directed. |
| 86 | M&L for one coat of synthetic enamel paint on old decorative surfaces of steel over 10cm width or girth including preparation of surfacescomplete all as specified and directed. |
| 87 | Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type oftreatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 250 m. |
| 88 | M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. |
| 89 | M&L for Providing water proofing treatment over cleaned roof surface (work to be executed is in Patches in differentnumbers of buildings) with super thermo APP modified water proofing memberanecomprising of the following for roofs (- |
| 90 | (a)Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. |
| 91 | (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm andthe over lap shall be sealed by flame. |
| 92 | (e) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm. |
| 93 | M&L for 20mm thick Screed bed or bedding layer of cement mortar 1:4 |
| 94 | S&F cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished complete all as specified and directed |
| 95 | RESTRICTED AREA |
| 96 | S&F in repair curtain rod stainless steel decorative type 20 mm diaincluding fixing bracket and end knobs complete all as specified, complete all as specified and directed. |
| 97 | S&F in repair looking mirror 600 x 450mm bevelled edges of selected quality glass mounted on 5 mm thick PVC Sheet with PVC frame around and fixed to wooden plugs with CP brass screwscomplete all as specified and directed. |
| 98 | Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazedcomplete all as specified and directed. |
| 99 | S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge. |
| 100 | S&F in repair 15mm bore bib tap cast copper alloy chromium plated with fancy type crutch or butterfly handels screwed down for iron pipes or for brass ferrulecomplete all as specified and directed. |
| 101 | S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes,complete all as specified and directed. |
| 102 | S&F in repair 15mm bore stop valves/ Angle cock chromium plated screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unioncomplete all as specified and directed. |
| 103 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed. |
| 104 | Ditto all as per srl item No. 2.08 above but length 600mm complete all as specified and directed. |
| 105 | S & F Health Faucet size 15 mm chromium platedwith flexible tube 1.2 m long etc complete all as specified & directed. |
| 106 | S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket completecomplete all as specified and directed. |
| 107 | S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar 1:6complete all as specified and directed. |
| 108 | S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap and make good to match with the existing surface of floorcomplete all as specified and directed. |
| 109 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipecomplete all as specified and directed. |
| 110 | S&F in repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging devicecomplete all as specified and directed. |
| 111 | S&F in repair vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets complete all as specified and directed. |
| 112 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe complete all as specified and directed. |
| 113 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe complete all as specified and directed. |
| 114 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed. |
| 115 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 40mm bore pipe complete all as specified and directed. |
| 116 | Supply & laying of CPVC pipes 16 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed. |
| 117 | Supply & laying of CPVC pipes 20 mm Outer dia,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed. |
| 118 | S&F 25mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed. |
| 119 | S&F 40mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed. |
| 120 | Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from sitecomplete all as specified and directed. |
| 121 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltrhoisted and fixed in position complete all as specified and directed. |
| 122 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position complete all as specified and directed. |
| 123 | S&F in repair PVC waste pipe size 32 mm flexible with coupling for WHB/Sink/Urinal etc complete all as specified and directed. |
| 124 | S&F in repair CP bras soap tray/dish of approved make etc complete all as specified and directed. |
| 125 | S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 126 | S & F in repair Alluminium Door closer hydraulically regulated, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 127 | Taking down cement plaster or cement lime plaster or wall tiles of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 128 | M&L 15mm thickplasterin CM 1:4 on brick wall finished even & smooth w/o using extra cement in patchescomplete all as specified and directed. |
| 129 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 130 | Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 131 | M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.16 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) over and including screed bed 15mm thick rendering in CM 1:6 complete all as specified and directed. |
| 132 | M&L vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed. |
| 133 | Ditto all as per srl item No 2.37 above but in skirting/ daod over and includin rendering 10mm thick CM 1:4 complete all as specified and as directed. |
| 134 | M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and as directed. |
| 135 | M&L Cudappah stone slab on cooking platform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete all as specified and as directed. |
| 136 | M&L 18-20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed. |
| 137 | M&L for PCC (1:2:4) type B-0 (Using 12.50 mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed. |
| 138 | Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and as directed. |
| 139 | Taking down chowket or frame areaexceeding 1.5 Sq mtr but not exceeding 4.00 Sq mtr each complete all as specified and directed. |
| 140 | Taking down Shutter onlyexc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed. |
| 141 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specificationincluding making good to the disturbed surfacesand matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etccomplete all as specified and as directed. |
| 142 | S&F 30 mm thick PVC flush door shutter having one side lamination with5mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles wa well as top, bottom & lock rail.MS frame shall have a coat of metal primer of approved make and manufacturer.The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+_0.25) thick Prelam PVC sheet of denisity 600 Kg/Cbn manufacured by an ISO-9001-2015 certified company, on both side of the inside panel etc complete all as specified and as directed. |
| 143 | S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window,ventilator frame,Louvers with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfacesand matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etccomplete, as spd . |
| 144 | S&F powder coatedaluminum window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. including making good to the disturbed surfaces complete all as specified and directed. |
| 145 | S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 146 | M&L two coat of synthetic enamel pinting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed. |
| 147 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed. |
| 148 | S&F 4mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators complete all as specified and directed. |
| 149 | S&F 100 mm long aluminium butt hinges alloy with galvanised ms hinge pin, anofised and fixed type C-21complete all as specified and directed. |
| 150 | S&F 150mm long aluminium anodised barrel tower bolt and fixed complete all as specified and directed. |
| 151 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed. |
| 152 | S&F 250mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 153 | M&L for preparation of old treated surfaces of wall and applying one coat of distemper Oil emulsion white or tinted complete all as specified and directed. |
| 154 | M&L for subsequent coat of distemper oil emulsion white or tinted over one coat applied under Srl item No. 2.59 above complete all as specified and directed. |
| 155 | M&L for one coat of synthetic enamel paint on old decorated wooden surfaces over 10cm width or girth including preparation of surfacescomplete all as specified and directed. |
| 156 | M&L for one coat of synthetic enamel paint on old decorative surfaces of steel over 10cm width or girth including preparation of surfacescomplete all as specified and directed. |
| 157 | Schedule of credit of Amount Rs 31,274.00 to be deduct during AOC. |
