Repairing of Bokchara stack yard under Bongaon N.H Sub-Division office,for accommodation of security personnel in the campus of office of the Assistant Engineer, Bongaon NH sub division under NH Division-V, PW(R)Dte, during the year 2025 - 2026.- 1 Stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 75 m as directed. 2 Labour for taking out door and window frame including shutter for repair or replacemnt of different part of the frame and refixing the same including mending good alldamages complete.(Concrete and brick work for mending damage will be paid separately). up to area 2.5 sq.m. 3 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor.Existing stackyard Repair 4 Ridging of Ranigunge pattern tiled roof of 1st class quality fitted and fixed including the cost of setting and pointing with Cement mortar (1:3) (Cement 0.2Kg/Mtr 5 Ceiling of commercial ply as per design fitted and fixed complete (excluding the supporting frame work but including necessary wood battens of size 40mm x20mm ).In ground floor4mm thick 6 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement 20 mm. thick 7 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). 8 Taking out shutter of door and window, dismantaling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fitting but with new screws as necessary.( where different part of same shutter are renewed under different item, payment under item 73 will be made once only). 9 Z-batten shutters of door and window as per design havings tongued and groove-half lap jointed as per direction of the Engineer-in-Charge including fitting andfixing shutter in position, but excluding the cost of hinges and other fittings in ground floor.19mm thick shutter 10 supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar , end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction . ( cost of concrete will be paid separately).40mm x 6mm, 125mm Length . 11 Iron butt hinges of approved qualityfitted and fixed with steel screws, with ISI mark. 12 100 mm x 58 mm x 1.90 mm. 13 75 mm x 47 mm x 1.70 mm. 14 Iron socket bolt of approved quality fitted and fixed complete.150 mm long x 10 mm dia bolt. 15 Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm dia rod with centre bolt and round fitting. 300mm long 16 Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. with 1:6 cement mortar.15 mm. thick plaster. 17 Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturers specification)including cleaning and smoothning of surface.Two Coats 18 Priming one coat on timber or plasteredsurface with syntheticenamel oil bound primer of approved quality including smoothening surfaces by sand papering etc. 19 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sandparpering etc. in cluding using of approved putty etc. on the surface , if necessary. 20 On timber or plastered surface: With super gloss (hi-gloss)Two coats (with any shade except white). 21 On steel or other metal surface:With super gloss (hi-gloss).Two coats (with any shade except white). 22 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 23 40 mm dia. medium quality 24 32 mm dia. medium quality 25 25 mm dia. medium quality 26 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or S trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm 27 Supplying, fitting and fixing shower of approved brand and make (ii) Chromium plated round shower with revolving joint (Equivalent to Code No. 541(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand 28 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make withnecessary fixing materials and clamps complete. i) Polythene Flush Pipe 29 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 30 Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long 31 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm long 32 Supplying, fitting and fixing Waste fittings complete.(a) C.P. over brass, (ii) 32 mm 33 Supplying, fitting & fixing Aluminium domical grating.100 mm 34 Supplying, fitting and fixing bib cock or stop cock. 35 Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand). 36 Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). 37 Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete..(i) 635 mm X 395 mm X 420 mm 38 Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.ii) 550 mm X 400 mm size 39 Supplying, fitting and fixing pillar cock of approved make.CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent). 40 Supply of UPVC pipes(B- type) & fittings conforming to IS-13592-1992 41 Single Socketed 3 Meter Length,b)110 mm dia 42 Fittings: Door Tee, 110 mm dia 43 Bend 87.5º, b)110 mm dia 44 Vent Cowl, b)110 mm 45 Pipe Clip, b)110 mm 46 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessaryspecials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.Above ground110 mm dia
