Tender For Civil Maintenance Work In Various Residences Located At Mla Niwas-2 (Purana) - Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement morter 1:2 (1 cemnt;2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindance E.C. 20% with 1% concentration. D.A.R No-2.35.3.1 2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gapforthermal expansion, 110 mm dia. (i) Single socketed pipes. 12.41.2 3 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30mm thick including ISI marked Stainless Steel butt hinges with necessary (DSR -9.21.2) 4 Providing amd fixing Chlorinated Polyyinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plains & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipe and fitting with one step CPVC solventcement and testing of joints complete as per direction of Engineer In charge . Internal work -Exposed on wall (20mm nominal outer dia pipe )DSR NO .18.7.2 5 Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 ( 15 mm nominal bore)18.53.1 6 Providing and fixing water closet squatting pan (indian type W.CPan) with 100 mm sand cast Iron P or S trap. 10 liter low level white P.V.C flushing cistern. Including flush pipe, with manually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures complete. Including cutting and making good the walls and floors wherever required. (17.1) white vitreous china orrisa patter w. c. pan of size 580x440 mm with integral type foot rest (17.1.1 ) 7 Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube upto 1 meter long with S.S. trangular plate to Eureopean typeW.C. of quality and make as approved by Engineer-in- charge.(17.16A). 8 Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) Conforming to IS : 7231with all fittings and fixtures complete.(17.18). 10liter capacity -white (17.18.1) 9 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white. D.S.R No- 17.19.1 10 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. (17.28).semi rigid pipe 32mm dia (17.28.1.1) 11 Providing and fixing CP Brass Single lever telephonic wall mixer of quality& make as approved by Engineer in charge. 15 mm nominal dia. Dsr17.22b 12 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid. D.S.R No- 17.20.1 13 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, celestory windows, all complete with. 4.0 mm thick glass panes. DSR No- 10.30.1 14 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, rallings, brackets, gates and similar works. DAR No- 10.25.2 15 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). painting two coats of approved wood preservation to sides of chowkhats and making good the damages to wall and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Door chowkhats DAR No- 14.2.1 16 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR No- 9.83 17 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (DSR No- 11.38) 18 Providing and fixing 1st quality ceramic, glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete. DSR No-8.31 19 Providing Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. ( DAR No- 11.3.1) 20 Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machne cut for kitchen platforms, vanity counters.Window sills facias and simular locations of required size, approved shade coulur and texture laid over : 20 mm thick base cement mortar 1:4 ( 1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy louch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm (DSR No- 8.2.2.2) 21 15 mm cement plaster on rough side of single or half brick wall ofmix: 1:4 ( 1 cement 4 coarse sand) (DSR No- 13.5.1) 22 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R No- 13.80 23 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) DSR No- 6.4.1 24 Mirror polishig on marble work/Granite work/stone work where ever required to give high gloss finish complete. DAR No- 8.6 25 Taking out existing CC interlocking paver blocks from footpath/central verge, including removal of rubbish etc, disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviable material within 50 meter lead as per direction of Engineer-in-charge. (DAR 16.83) 26 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete as per the direction of Engineer-in-charge (Old CC paver blocks shall be supplied by the department free of cost). DSR No-16.84 27 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide apperture with matching wood beading. DSR No-9.7.8. 28 Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete. 125x65x2.12 mm (DSR -9.55.1) 29 Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete100x58x1.90 mm (DSR -9.55.2) 30 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378). 300x16 mm (DSR -9.62.1) 31 Providing and fixing ISI marked oxidised M.Ssliding doorbolts with nuts and screws etc complete. 250x16 mm (DSR -9.62.2) 32 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 250x10 mm (DSR -9.63.1) 33 Providing and fixing ISI marked oxidised M.S Tower bolt black finish (Barreltype) with necessary screws etc complete(Copper oxidised as per IS 1378) 200x10 mm(DSR -9.63.2) 34 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessaryscrews etc. complete (Copper oxidised as per IS 1378). 125 mm (DSR -9.66.1) 35 Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings.This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing ofjoints complete as per direction of Engineer-in-charge.External work. 25mm nominal outer dia PipesDSR No- 18.7.3 36 Providing and fixing brass bib cock of approved quality ( 15 mm nominal bore)18.15.1 37 Providing and fixing brass stop cock brass stop cock of approved quality ( 15mm nominal bore)18.16.1 38 Providing and fixing ball valve(brass ) of approved quality , high or low pressure , with plastic floats complete:( 15 mm nominal bore)18.18.1 39 Providing and fixing C.P.Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( 18.49.1) 40 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS stanDSRd and weighing not less than 810 gms , ( 15 mm nominal bore) 18.50.1 41 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. D.A.R No- 15.60
