|
| 1 | Safe carriage loading unloading with proper stacking of following material from ESC Daliganj to JE dump store. |
| 2 | 11/0.4 kv 250/400 KVA New Transformer |
| 3 | 11 mtr long ST pole |
| 4 | LT ABC (all Size) |
| 5 | LT pvc cable 1x400/240/630 sqmm |
| 6 | LT XLPE CABLE 3.5x400/240 SQMM |
| 7 | 11kv 3x185/120/70 sqmm xlpe cable |
| 8 | 11 KV End Termination O/Door & I/Door 3x185/120/70 sqmm |
| 9 | 11 KV ST/TH C/J KIT 3x185/120/70 sqmm |
| 10 | Safe carriage loading unloading with proper stacking of following material from JE dump store to work site. |
| 11 | 11/0.4 kv 250/400 KVA New Transformer |
| 12 | 11 mtr long ST pole |
| 13 | LT ABC (all Size) |
| 14 | LT pvc cable 1x400 sqmm |
| 15 | LT XLPE CABLE 3.5x400/240 SQMM |
| 16 | 11kv 3x185/120/70 sqmm xlpe cable |
| 17 | 11 KV End Termination O/Door & I/Door 3x185/120/70 sqmm |
| 18 | 11 KV ST/TH C/J KIT 3x185/120/70 sqmm |
| 19 | providing and fixing 11 kv DO fuse set (pin insulator provided by deptt) |
| 20 | Erection of LT ABC (all type) |
| 21 | providing and fixing of syntex type fuse unit (i/c-01,o/g-02) |
| 22 | plinth for syntex type fuse unit with proper size |
| 23 | Fabrication & erection of S/S type double pole for 11KV line on 11 M long ST pole or 8.5 mtr PCC polewith fixing of necessary clamps & other acessories like 1 no. top channel 100×50 mm,2 no.MS angle 65x65x6mm,danger board,number plate,barbed wire,TPMO set & D.O.fuse set |
| 24 | Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cemend sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr hight & 0.35 mtr wall will be constructed.Rest wall should be 0.23 mtr thick.brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be fiilled from the ground level up to 15 centimeter below from the top of wall,Cement,sand & brick Ballasts should be filled up to 15 centimeter.Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand,cement and stone ballast in the ratio of 1:2:4.The t/fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor .) |
| 25 | Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 400 KVA T/Fs of T/FPlinth and including jumpering with the system ( Alltherequiredmatrial for abovejob shall be provided by contractor except T/Fs) |
| 26 | Construction of retaining wall, fabrication & erection of Wire mesh fencing around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO.(All the material will be arranged by the contractor at his own cost). |
| 27 | Lt xlpe 3.5x240 sqmmcable laying digging of truch and connection with fuse unit as per site condition wide including supply of required material as fine san , 1st class brick stoneslab single ckt with manual mathod (all the material required for line will be supplied.by the contractor except cable) |
| 28 | 11kv 3x185/120/70 sqmm xlpe single ckt Cable laying in normal soil by digging of trench 900 mm deep, 500 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable) |
| 29 | ChemicalEarthingsystemwithouterpipe diameter50mm,innerStrip40x6,length3000 mm. galvanization up to 200 micro, earthing pipe withcrystallineconductivemixturefilledinside thepipewithanti-corrosion&highconductive along with 50Kg(Asperrequired) ofBFC which should be capable to reducing the soil resistively with goodmoisture retaining capacity. (Specificationofchemicalearthingand drawing is hereby enclosed). All material shall by supply by the contractor. |
| 30 | hoisting , winding and jumpering of LTcable 3.5x400/240 or 1x630/400/240 sqmm |
| 31 | hoisting of 11 kv xlpe cable 3x185/120/70 sqmm |
| 32 | making hit and shrinkables joitns of follwing sizes and type for11 kv xlpe cable size 3x185/120/70(jointing kit will be provided by department) |
| 33 | 11 KV End Termination O/Door & I/Door 3x185/120/70 sqmm |
| 34 | 11 KV ST/TH C/J KIT 3x185/120/70 sqmm |
| 35 | All taxess as applicable shall be paid time to time extra |
