Tender For Repair And Maintenance Of Xen Civil Office At Hindaun - Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead :Of area 3 square meter and below.(B-14/14.12.1) 2 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick (B-12/12.3.2) 3 Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,..........do......................,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately).For fixed portion Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)(B-16.1.1.1) 4 For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer). (B-16/16.1.2.1) 5 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.)With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835.16.5.1 6 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding..(B-16.11) 7 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).(B-3.1.6) 8 Rough Chisel dressed Kota stone 35 mm thick flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointingwith cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects :(B-11.20) 9 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:Newwork(twoormorecoats)overandincludingscrappingandprimingcoatwithcement primer.(B-134 / 12.37.1) 10 Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer,putty, etc complete inallrespectincluding scaffolding andsafetyprovision.oldwork(B-141/12.43.2 ) 11 Paintingwithsyntheticenamelpaintofapprovedbrandandmanufactureto give an even shade :two or more coats .(B-12/12.46.2) 12 Labour charges for repair to door / window without using any material such asapplying randha (finishing) tightening of bolts & screw etc..(B-13.24) 13 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). B-7.13 14 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, lightgreen,lightblueandotherlightshadesglazedtilesconfirmingtoIS: 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cementslurry finishedwith flushpointing inthe white cement mixed with pigment to match the shade of the tile complete (excluding thecostofcementplasteronwallsandpillar).AddextraforFixingglazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick- set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mmthickness instead of cement mortar..(B-7/7.12+7.19) 15 Dismantlingtileworkinfloorsandroofslaidincementmortarincluding stacking of serviceable material and disposal of unserviceable material within 50 meter lead: for thickness of tiles from 10 to 25 mm (B14/14.23.1) 16 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) (B/13.1) 17 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:Size 580x440mm. (S/1.2.2) 18 Providingandapplyingwhitecementbasedputty overplasteredsurfacetoprepare the surface even and smooth completeOld Plastered Surface (two or more coats) (12.22.2) 19 Removing white or colour wash by scrapping and sand papering and preparing thesurfacesmoothincludingnecessaryrepairstoscratchesbysandla/loi.(only for colour changing ).(B/12.35.7) 20 Providing and fixingSuperior quality CP Brassfittings of approved make as perdirectionofEngineer-in-chargeJetSpray (PremiumheavyQuality)as approved by Engineer-in-Charge(S/2.33.23) 21 P&FwaterclosetSeatCoverswithbrasshingescompleteSolidPVC(IS 2548 marked) grade-I whitefor EWC. :.(S-1/1.7.2) 22 P&FLowlevelFlushingCisternof10litrescapacity(IS:2556mark)of approvedmakewithcompletefittingsC.I.bracketsdulypainted,brassball cock withball(IS:1703mark)completeincludingcutting andmaking good the wall:PVC with PVCbend as per IS : 7231 ..(S-1/1.20.2) 23 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore(S/2.6.1) 24 P&F looking mirrors with PVC frame of approved (atul/equivalent) Size 500x400mm (S-1/1.45.1) 25 P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors B class: 15 mm dia. Nominal bore; Exposed on wall(S-2/2.1.1) 26 25 mm dia. Nominal bore;Exposed on wall(S-2/2.1.3) 27 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connectionetc., complete of approved design: .(S-26 /2.26.3 )500 (liters capacity). 28 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete Brass wt.Not less than 400 gm, 20mm. :S/2.11.2 29 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :(A)Gun-metal 15mm nominal bore:( S-22 /2.15.1 ) 30 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make::(B)Gun-metal 25mm nominal bore( S-22 / 2.15.3) 31 P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make (S/1.48.2) 32 Construction of manholein all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mmthickinsideplasterinCM1:6,finishedwithfloatingneatcement, 50mmthickM-15gradeC.C.flooring,makingchannels,80mmthickstone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M (S/3.19.1) 33 Constructionofsoakagewellinalltypeofsoilwith300mmthickdry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earthwithinaleadof50mtr.:Size300Cm.diaoutside&240Cm.depth(S/3.22.2) 34 AntitermitetreatmentoffloorusingImidacloprid30.5%ECnonrepellent, odorless,lowdose,environmentallysafeterniticidewithrapidactionnon corrosivestainfree,bydrilling 12mm diameterholes....do......ECmixedwithwaterintherationof1:474willbe pumpedbyamotorizedspraypumpfromthejunctionboxinspecified manner.Theplinthareaoftheareatreatedwillbemeasuredforpayment.(B-1.39) 35 P& FWVCWashbasin(IstqualityIS:2556Mark)ofapprovedmakewithC.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 550 mm x 400 mm(S/1.36.3) 36 ProvidingSolidPVCfalseCeilingconsistingof600mmx600mm,5mm (±0.25) thick Plain embossedPVC sheetof......do.......(25x25mm)anglesetc. Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing. (B-10/10.35.4) 37 Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.Applying Epoxy primer on the exposed steel bars.Applying Epoxy hardener and resin mix Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect.(B-13.29) 38 Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM1:3(1cement:3coarsesand)jointingwithwhitecementmortar1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Keseriaji/ Abu Ambaji (Green Marble)1501 Cm2 to 3600 Cm2 Tiles (B-7/7.3.2) 39 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide (B-9.6) 40 Providing and fixing sun control film, thickness of film 1 Mil Visible Light Transmittance 4-24% & Solar Energy Transmittance 42-51% & Total solar Energy rejection 37-43%of approved colour and shade , complete in all respect , at all level , as directed by engineer- in -charge.(B-16/16.15) 41 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. Add Extra if I/rail section is used(B-9.1.1 ) 42 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor (S-1.3 ) 43 Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap.(S-1.9 ) 44 P & F Bath Shower of approved quality/make.C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm.(S-1.53.3 ) 45 P & F Shower arm 15mm dia of approved quality/make. (-do-) size 300mm.(-do-) (S-1.54.3 ) 46 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.(S-1.59 ) 47 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:(-do-) Long body, 15mm nominal bore weight not less than 690 gm (S-2.7.4 ) 48 C.P. Brass bib cock,15mm nominal bore. (S-2.7.3 ) 49 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) (S-2.12.1 ) 50 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant.110 mm dia (S-3.16.3 )
