Tender For Renovation Of Reception Area And Miscellaneous Civil Works At Sdf Building., 24 Paraganas North-West Bengal

Renovation Of Reception Area And Miscellaneous Civil Works At Sdf Building.-2 SUPPLYING, FITTING AND FIXING BOILING WATER PROOF PLY CONFORMING TO IS: 710-1977 BONDED WITH PHENOL FORMALDEHYDE SYNTHETIC RESIN CONFORMING TO IS: 848-1974 OF APPROVED MAKE AND BRAND FITTED AND FIXED AS PER DESIGN AS PER APPROVAL AND DIRECTION OF ENGINEER-IN-CHARGE. [EXCLUDING THE COST OF SUPPORTING FRAME WORK AND TEAK WOOD BATTEN/LIPPING]. 12 mm 3 SUPPLYING, FITTING AND FIXING BOILING WATER PROOF PLY CONFORMING TO IS: 710-1977 BONDED WITH PHENOL FORMALDEHYDE SYNTHETIC RESIN CONFORMING TO IS: 848-1974 OF APPROVED MAKE AND BRAND FITTED AND FIXED AS PER DESIGN AS PER APPROVAL AND DIRECTION OF ENGINEER-IN-CHARGE. [EXCLUDING THE COST OF SUPPORTING FRAME WORK AND TEAK WOOD BATTEN/LIPPING]. 19 mm 4 WOOD WORK IN DOOR AND WINDOW FRAME FITTED AND FIXED IN POSITION COMPLETE INCLUDING A PROTECTIVE COAT OF PAINTING AT THE CONTACT SURFACE OF THE FRAME EXLUDING COST OF CONCRETE, IRON BUTT HINGES AND M.S CLAMPS. (THE QUANTUM SHOULD BE CORRETED UPTO THREE DECIMALS). Other Local Wood 5 SUPPLYING FITTING, FIXING DECORATIVE LAMINATION CONFORMING TO IS: 2046 : 1995 AS PER APPROVED MAKE, BRAND, FINISH AND THICKNESS WITH FITTING, FIXING THE SAME ON PARTICLE/MDF / PLY BOARDS WITH RECOMMENDED / APPROVED ADHESIVE WITH PROPER CLIPPING THE SIDES FOR BETTER ATTACHMENT AS PER DIRECTION OF ENGINEER-INCHARGE. THE RATE INCLUDES THE COST OF LABOUR, ADHESIVE AND ALL INCIDENTAL CHARGES THEREOF. GLOSSY/MATT/SUEDE EXCLUDING SURFACE TEXTURE OR METALLIC LUSTRE. Thickness of laminate 1 mm 6 PROVIDING AND FIXING OF FALSE CEILING WITH POWDER COATED EXPOSED G.I. GRID SUSPENSION SYSTEM (E-GRID T 2430 OR EQUIVALENT LOAD CARRYING CAPACITY WITH MID SPAN DEFLECTION NOT EXCEEDING 1/360 SPAN WITH HANGER SPACING OF 1200MM C/C) CONSISTING OF MAIN RUNNER 3600 MM LONG, CROSS TEE 1200 MM / 600 MM LONG AND WALL ANGLE. THE WALL ANGLE SHALL BE FIXED ON PVC DASH FASTENERS ON THE PERIMETER OF THE WALL BY STEEL SCREWS WITH DISTANCE 300MM C/C. THE MAIN RUNNERS TO BE PLACED @ 1200 MM. THE CROSS TEE 1200MM WILL BE INSERTED IN THE PRE- CUT LOTS OF MAIN RUNNER AT REGULAR INTERVAL OF 600 MM TO FORM A MODULAR GRID OF 1200MM X 600MM. ADDITIONAL CROSS TEES OF 600 MM SHALL BE PLACED PERPENDICULAR TO THE CROSS TEE 1200 MM LONG TO FINALLY FORM A GRID OF 600 MM X 600 MM. GRID OF MODULE SIZE 600 MM X 600 MM SHALL BE SUPPORTED BY 6 MM DIA G.I. WIRE FROM PURLINS / SOFFIT. 6 MM THICK HIGH PRESSURE STEAM CURED NON ASBESTOS FIBRE CEMENT STANDARD CEILING BOARD (DENSITY > 1300 KG/M3) OF SIZE 595 MM X 595 MM, CONFORMING IS 14862 & TYPE B CATEGORY III OF ISO 8336, TESTED AS PER AS-1530 PART 3 & BS-476 PART 4,5,6,7 & 8, SHOULD BE PLACED IN THE Grid module to form a False Ceiling 7 REMOVAL OF EXISTING FALSE CEILING (INCLUDING BOARD & FRAME WORK) & DISPOSAL OF THE BOARDS ONLY BEYOND THE COMPOUND, IN CONFORMITY WITH THE MUNICIPAL / CORPORATION RULES FOR SUCH DISPOSAL, LOADING INTO TRUCK AND CLEANING THE SITE & STORE The metal part (GI / Al) part inside the premises as per direction of Engineer in charge 8 MIRROR POLISHING ON MARBLE WORK / GRANITE WORK / stone work where ever required to give hi gloss finish completeCPWD Schedule 9 SUPPLYING AND LAYING TRUE TO LINE AND LEVEL VITRIFIED TILES OF APPROVED BRAND (SIZE NOT LESS THAN 600 MM X 600 MM X 10 MM THICK) IN FLOOR, SKIRTING ETC. SET IN 20 MM SAND CEMENT MORTAR (1:4) AND 2 MM THICK CEMENT SLURRY BACK SIDE OF TILES USING CEMENT @ 2.91KG./SQM OR USING POLYMERISED ADHESIVE (6 MM THICK LAYER APPLIED DIRECTLY OVER FINISHED ARTIFICIAL STONE FLOOR/MOSAIC ETC WITHOUT ANY BACKING COURSE) LAID AFTER APPLICATION SLURRY USING 1.75 KG OF CEMENT PER SQM BELOW MORTAR ONLY, JOINTS GROUTED WITH ADMIXTURE OF WHITE CEMENT AND COLOURING PIGMENT TO MATCH WITH COLOUR OF TILES / EPOXY GROUT MATERIALS OF APPROVED MAKE AS DIRECTED AND REMOVAL OF WAX COATING OF TOP SURFACE OF TILES WITH WARM WATER AND POLISHING THE TILES USING SOFT AND DRY CLOTH UPTO MIRROR FINISH COMPLETE INCLUDING THE COST OF MATERIALS, LABOUR AND ALL OTHER INCIDENTAL CHARGES COMPLETE TRUE TO THE MANUFACTURERS SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE. (WHITE CEMENT, SYNTHETIC ADHESIVE AND GROUT MATERIAL TO BE SUPPLIED BY THE CONTRACTOR). WITH APPLICATION SLURRY @1.75 KG/ SQ.M, 20 MM SAND CEMENT MORTAR (1:4) & 2 MM THICK CEMENT SLURRY AT BACK SIDE OF TILES, 0.2 KG/ SQ.M WHITE CEMENT FOR JOINT FILLING WITH PIGMENT. Light Colour 10 REMOVING LOOSE SCALES, BLISTERS ETC. FROM OLD PAINTED SURFACE AND THOROUGHLY SMOOTHENING THE SURFACE TO MAKE THE SAME SUITABLE FOR RECEIVING fresh coat of paint 11 RENDERING THE SURFACE OF WALLS AND CEILING WITH WATER PROOF WALL PUTTY, COMPITABLE WITH Acrylic paint of approved make & brand. (1.5 mm thick). 12 APPLYING INTERIOR GRADE ACRYLIC PRIMER OF APPROVED QUALITY AND BRAND ON PLASTERED OR CENCRETE SURFACE OLD OR NEW SURFACE TO RECEIVE DISTEMPER/ ACRYLIC EMULSION PAINT INCLUDING SCRAPING AND PREPARING THE SURFACE THROUGHLY, COMPLETE AS PER MANUFACTURERS SPECIFICATION AND AS PER DIRECTION OF THE EIC. TWO COATS. Water based interior grade Acrylic Primer 13 APPLYING ACRYLIC EMULSION PAINT OF APPROVED MAKE AND BRAND ON WALLS AND CEILING INCLUDING SAND PAPERING IN INTERMEDIATE COATS INCLUDING PUTTY (TO BE DONE UNDER SPECIFIC INSTRUCTION OF SUPERINTENDING ENGINEER) : (TWO COATS) Standard Quality

INR 500 /-

INR 4.07 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB