Fitting, fixing fire Hydrant lending( FHL) valve for demarcation for fire fighting and allied work in New Town under NKDA.- 1 180 LPM capacity Fire Water pumpingset at 50 MWC driven by required capacity pump motor of 2900 RPM mounted on a common base frame and other accessories for JOKEY Fire pump includind all fittings and AVM pad ,matching flange,nut bolt etc. 2 900 LPM capacity Fire Water pumpingset at 35 MWC driven by required capacity pump motor of 2900 RPM mounted on a common base frame and other accessories for MAIN Fire pump includind all fittings and AVM pad ,matching flange,nut bolt etc. 3 MS, ERW,PE, Medium Pipe,IS:1239(pt-1)includng all fittings Like bend tees elbow and twocote of primer and oncote of Red paint. 4 100 m dai 5 80mm dia 6 CastlroinButterfly valve 7 100 NB 8 80 NB 9 Cast IronNon Return valve(Duel Plate Flap Type) 10 80 NB 11 Composition Motor contorl panel for automatic operation of Main & Stand By pump including Sequential operational. 12 4 dia pressure Gauge with accessories 13 Power cable including termination from Fire motor control panel to motors. 14 3 core* 10 sq.mm PVC AI , Armored cable 15 G.M Ball valve ISI 16 15 NB 17 CI Foot Valve 18 80 mm dia 19 Ms , ERW , PE , Medium pipe , Is : 1239( pt-1) includng all fittings Like bend tees elbow and twocote of primer and oncote of Red paint ,includind all sopourt fittings. 20 100 mm dia 21 80 mm dia 22 ss single headed hydrant valve as per is: 5290, type-A with PVC blank cap & chain 23 63 mm 15 meter long RRl hose ( is: 636. type-A) with ss coupling (is: 903) binded withGL wire. 24 SS short branch pipe with 18 mmdia nozzle(is:903) 25 MS hose box suitable to accommodate 2 no fire hose & a branch pipe to be installed 26 Ms swing type hose reel with 30 meter long 20 mm dia hose & PVC shut- off nozzle to be installed at wall . 27 25 NB gun- metal ball valve for hose reel system. 28 2 Way fire Brigade connector 29 Support for fire pipe line with all other fittings materials 30 Pipe protective chemical and tape including all other fittings 31 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. 32 (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 33 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 34 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety 35 Supplying ready mixed concrete of M 30 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier] In ground floor and foundation. (i) Without approved concrete pump 36 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 37 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 20 mm thick plaster 38 (a) 15 mm thick plaster 39 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. In Ground Floor: (b) Two Coats 40 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. (In Ground Floor) 41 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality 42 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) 43 Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. (i) 32 mm thick 44 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL 45 Brick work with 1st class bricks in cement mortar (1:4) (a) 46 125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor. 47 Earthwork in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm. includingwateringand rammingetc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. 48 Ordinary Cement concrete (mix1:1.5:3) withgraded stonechips (20mm nominal size)excludingshutteringandreinforcement ifany, ingroundfloor as per relevant IS codes. (i) Pakur Variety 49 Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth
