Tender For Repair Work Of Designated Accommodation In 22Nd Up Ncc Battalion Located In Sitapur - Repair Of Water Supply Pipe Line For Pi Staff Md Accn In Ncc Colony Sitapurproviding And Fixing Gi Union In Gi Pipes Including Cutting And Threading The Pipe , sitapur-Uttar Pradesh

Repair Work Of Designated Accommodation In 22Nd Up Ncc Battalion Located In Sitapur - Repair of water supply pipe line for PI staff Md Accn in NCC Colony SitapurProviding and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work). 50mm nominal bore.DSR 18.46.6 2 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms. 15 mm nominal bore DSR 18.46.1 3 Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work). 80mm nominal bore. DSR 18.46.8 4 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931, 15 mm nominal bore DSR 18.53.1 5 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.1 6 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia DSR 17.28.12 7 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet, 100 mm diameter DSR 18.22.1 8 Making connection of G.I distribution branch with G.I main of following size by providing and fixing tee including cutting andthreading the pipe etc complete DSR 18.13.1 9 providing and placing on terrace at all floor level polythene water storage tank IS:12701 marked with cover and suitable locking arrengment and making necessary holesfor inlet outlet and overflow pipes but witout fittingand the base support for tank 10 Providig and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) DSR 18.17.1 11 Providig and fixing PTMT bal cock of approved quality colour and make complete epoxy coated aluminium rodwith LP/L.P.H.D gun metal gate valve with C.I wheel of approved quality (screwed end) DSR 18.62.1 12 Elbow 40mm DSR 18.1.5 13 Water Supply, Electrification and Boundary walls in NCC Colony at SitapurClass- 150 brick work in 1:6 cement and Coarse sand of mortar in super structure includingsupply of all materials, labour and tools and plants etc. required for proper completion of the work.DSR 6.3.1 14 12mm Plaster in 1:4 cement and fine sand mortar I/C cost of all material labour T&P etc. complete as per direction of E/I. DSR 13.1.1 15 providing and placing on terrace at all floor level polythene water storage tank IS:12701 marked with cover and suitable locking arrengment and making necessary holesfor inlet outlet and overflow pipes but witout fittingand the base support for tank DSR 18.48 16 Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work). 50mm nominal bore. DSR 18.46.6 17 Electrification Work 18 Repair work from N-1 to N-10 and J-1 to J-4 in NCC Colony, SitapurDismantling doors & windows leaves,including stacking of dismantledmatrials as directed by Engineer in chargewith in a distance of 60m (200ft) DSR-15.40.1 19 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary-DSR-9.21.2 20 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :DSR 9.55.1 21 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :DSR-9.66.1 22 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : DSR-9.66.1 23 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : DSR 9.63.1 24 Painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paints & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. paint to be used should confirm to the I.S.I.DSR 13.53.1 25 12mm Plaster in 1:4 cement and fine sand mortar I/C cost of all material labour T&P etc. complete as per direction of E/I. DSR 13.1.1 26 Distamper two coat with oil bound distamper of approved barand I/C cost of all material labour T&P. complete as per dierection of E/I. DSR 13.41.1 27 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).DSR 5.1.2

INR 860 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB