Complete upgradation of existing guest house by way of new tile flooring/ granite flooring, wood work in doors/ windows, new false ceiling, painting, polishing, furniture/ furnishings, sanitary works along with other allied civil works at J&K Guest House, 2-Court Road, Amritsar. (Part A: CIVIL WORKS)- 1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm 2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead: Area of 3 sqm. and below 3 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts in cement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead: Door chowkhats 4 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts in cement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead: Window chowkhats 5 Making the opening for door/window/clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. 6 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 7 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) 8 18mm Cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand) 9 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. 10 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 11 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall 12 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) 13 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar 14 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge:15 mm to 40 mm nominal bore 15 Dismantling of flushing cistern of all types (C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead 16 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. 17 Labour engaged for taking out/ dismantling bathroom fixtures, existing over head and under counter cabinets in kitchen, wooden wardrobes along with other miscellaneous works and disposal of serviceable & unserviceable material within 50 meters lead as per direction of Engineer-in-charge. 18 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a)First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b)Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. 19 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class teak wood 20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters; With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws; 35mm 21 Providing and fixing superior quality wall tiles of specified thickness and approved make, in all colours,as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in epoxy with pigment of matching shade & providing spacers at requisite spacing complete; Basic cost of Tile = Rs. 100 per sft. Make Somany/ Kajaria or equivalent. 22 Providing and fixing beveled edge mirror of superior glass (of approved quality & size) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 23 Providing and fixing of tv unit/ console/ dressing consisting of wall panelling on backside of tv, drawers below tv etc. made up 18 mm thick HDHMR board border and 18 mm thick HDHMR board on the backside of cabinet, back side laminated with 0.8 mm thick laminate and exposed surface finished with veneer of superior grade (not less than 4 mm thick), grooves to be provided wherever required; of approved shade and quality, including all hardware fittings , sliding channels, hinges, handles (hettich or equivalent) complete job basic rate of HDHMR board = Rs. 1175.50 per sqm. Elevation area to be measured for payment. (Size and design of tv unit may vary as per availability of space and as per the directions engineer in charge) 24 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 25 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels; Granite of any colour or shade; (Area of slab over 0.5 sqm); 18mm 26 Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing ofcut edges etc. complete. 27 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge; Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 28 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge; Second class teak wood; 35mm 29 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws; Second class teak wood; 35mm 30 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/ wooden shade texture with following process in the sequence as detailed below: 1. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 2. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 3. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time). 31 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50 x 12 mm. 32 Providing and fixing wall hung white vitreous china water closet of approved design, shape, size and pattern including single piece slim concealed cistern with wall mounting frame and control plate, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Range- Kubix Prime (ID:KUS-WHT-35953BIUFSMPM) 33 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 34 Providing and fixing soil, waste and vent pipes; 100 mm dia; Sand cast iron S and S pipe as per IS:1729 35 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost ofmaking openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board (Check for greater heights) 36 Engaging dumping trucks/other machinery required etc. for carriage and disposal of rubble, mulba from site including loading at site and safe disposal complete job. 37 Supply and Installation of following sanitary fittings and fixtures; designed as approved by engineer in charge 38 Single lever exposed parts kit of Hi-flow diverter along with concealed body for single lever high flow diverter (Make Jaquar) (ID:KUP-CHR-35079NKPM) 39 Toilet Roll Holder with Flap (Make Jaquar) (ID:CAN-CHR-1153S) 40 Square Shape Maze Overhead Shower (Make Jaquar) (ID:OHS-CHR-1619) 41 Table top Wash basin (Make Jaquar) (ID:FLS-WHT-5935N) 42 Angular stop cock (Make Jaquar) (ID:KUP-CHR-35053PM) 43 Wash basin mixer- Single lever (Make Jaquar-Kubix Prime) (ID:KUP-CHR-35011BPM) 44 Health faucet (Make Jaquar) (ID:ALD-CHR-573) 45 Shower arm (Make Jaquar) (ID:SHA-CHR-455L400) 46 Soap Dispenser- Push Button (Make Jaquar) (ID:SDR-WHT-DJ0010FN) 47 Nanhi Trap 3 48 Jaquar Brass 32mm Full Waste Coupling (Chrome) (ID:ALD-CHR-705) 49 C.P. Jali 4 stainless steel anti cocoroach jali / trap floor drain with chrome finish 50 PVC connection 18 51 Jaquar Towel Ring Square (ID:ACN-CHR-1121N) 52 Jaquar Soap Dish Holder - Chrome (ID:AKP-CHR-35731P) 53 Jaquar 12 Inches Bottle Trap (ID:ALD-769L300X190) 54 Jaquar Double Coat Hook (Chrome) (ID:AKP-CHR-35761P) 55 Jaquar Towel Rail, 600 mm(ID:ACN-CHR-1111SM) 56 Pillar cock tall - Hindware 57 Short body bibcock (Jaguar or equivalent) 58 Wall mixer (Parryware or equivalent) 59 Waste pipe 60 Acrylic corner shelf 61 Providing and fixing hardware fittings; designed as approved by engineer in charge. 62 Godrej Tower Bolt 10 X 250 mm (Pack of 2) 63 Godrej Tower Bolt 10 X 150 mm (Pack of 2) 64 Godrej Aldrop lock 12 X 200 mm 65 Door Handles (Pack of 2) 66 Door closer-For Door Width 850-1100 mm and Door Weight 40-80 kg; Fire Rated; with standard arm -Surface Mounted Door Closer with Slide rail 67 Godrej Tower Bolt 10 X 300 mm (Pack of 2) 68 Door handles (18 inches), pull handle 69 Godrej 6 Lever Mortise Lock Handle Set 70 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete 71 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment. (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1 concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor: 72 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion): Treatment of points of contact of wood work with chemical emulsion Chlorophriphos /Lindane E.C. 20% with 1% concentration (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same 73 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion): Treatment of existing masonry using chemical emulsion (Chlorophriphos /Lindane E.C. 20% with 1% concentration)@ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of hole: 74 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20% 75 Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 76 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete; 2 mm thick 77 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete; 1 mm thick 78 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface 79 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour; Two coats 80 Finishing walls with textured exterior paint of required shade: Old work (one or more coats) applied @1.82 ltr/10sqm 81 Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead; with cement mortar 1:4 (1 cement : 4 fine sand) 82 Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete; 83 Providing and fixing shower cubicles made up of 10mm thick toughened glass with all patch fitting using ozone patch fitting complete wirh S.S brackets and handles (Saint gobain, modiguard or equivalent) 84 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 85 20mm nominal outer dia pipes. 86 25mm nominal outer dia pipes. 87 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 88 40mm nominal outer dia pipes. 89 50mm nominal outer dia pipes. 90 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc. 91 40mm nominal outer dia pipes. 92 50mm nominal outer dia pipes. 93 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 ( 1 cement : 6 coarse sand) 94 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 95 Providingand fixing cupboard made up of 18 mm thick HDHMR board for all horizontal and vertical members except backside where 8 mm HDHMR board to be provided, with laminate on inside and on the surface in direct contact with the wall (virgo make or equivalent) and veneer of approved shade & design of 4 mm thickness on front and sides; complete in all respect including all hardware fittings as approved like locks, channels, hinges, handles complete job (Hettich or eqv.)basic rate of HDHMR board = Rs. 1175.5 per sqm. Elevation area to be measured for payment. 96 Providing & fixing 4 mm veneer (virgo make or equivalent) lipped over 8 mm thick HDHMR board for architrave along the window and door jambs complete in all respects. 97 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately); Size of tile 600x600 mm 98 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge; Size of tile 600x600 mm 99 Providing and laying Ceramic glazed floor tiles of plank size (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in wood finish, in all colours, shades, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sq.m including pointing the joints with white cement and matching pigments etc, complete; (basic rate of tile-75/sft), Make - Kajaria/Somany 100 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil: 1 meter from cutting edge 101 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) 102 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement; 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 103 Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. 104 Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. 105 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level; Thermo-Mechanically Treated bars of grade Fe-500D or more. 106 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 107 Providing and fixing of 12 mm thick toughened glass with powder coated aluminium (U) profile in windows, ventilators etc; Clear Silicone including coated film on toughened glass of approved shade and pattern as per engineer-in-charge. All transport, Loading unloading complete job. 108 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters.(Area of opening for glass panes excluding portion inside rebate shall be measured) 109 Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture 110 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc; Internal work-Exposed on wall; 111 Providing and fixing Stainless Steel Maximus double bowl Sink 45x20; with C.I. brackets and other accessories, including painting of fittings and brackets, cutting and making good the walls wherever required : Handmade double bowl sink - Satin finish. Size: 1150 x 510 mm (45 x 20) Depth: 230 mm (9”); Installation: Undermount; Manufactured from 1.0 mm thick 304 grade stainless steel including outlet connection pipe and strainer; Make: Cera or equivalent 112 Providing, erection and fixing in position cabinet/ Cupboards/ racks upto 600 mm deep of 12 mm thick HDHMR board for all horizontal and vertical members with sides except backside where 8 mm HDHMR board to be used and all inside surfaces and exposed surface finished with Laminate of superior grade of 0.8 mm thickness including all hardware fittings like locks (wherever required), channels, hinges (soft close hinges and channels) handles complete jobs per directions of engineer-in-charge (basic rate of HDHMR board = Rs. 789.5 per sqm (All hardware fittings will be of hettich or equivalent brand) Elevation area to be measured for payment. (Kitchen) 113 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, upto 25 mtrs height above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c, horizontal and vertical tubes joint with cup and lock system with M.s tube, M.S tubes Challis M.S clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition of execution of work of cleaning and/ or pointing and/or applying chemical and removing it their after the scaffolding system shall be stiffened with bracings, runners connecting with the building etc. where ever required. if feasible, for inspection of work at required location with essential safety features for the work men etc, complete as per directions and approval of Engineer-in-charge.Note: - 1) The elevational area of the scaffolding shall be measured for the payment purpose.2) The payment will be made once only for execution all items of such works. 114 Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) 115 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete; Welded 116 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 117 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board; 510x1040mm bowl depth 200mm 118 Providing and laying premium quality Vitrified glazed double charged tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including using spacers (3mm) and grouting the joints of flooring tiles having appropriate width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete ); Size of tile 600x600 mm (Basic Rate of tile 90/sft). Brand-Kajaria 119 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required; One urinal basin with 5 literwhite P.V.C automatic flushing cistern. 120 Providing and fixing of fridge cabinet consisting of box type made using 18 mm thick HDHMR for all horizontal and vertical members along with shutters of 18 mm thick HDHMR board and 18 mm thick HDHMR board on the backside of cabinet, back side laminated with 0.8 mm thick laminate and exposed surface finished with veneer of superior grade (not less than 4 mm thick) of approved shade and quality, including all hardware fittings , sliding channels, hinges, handles (hettich or equivalent) complete job basic rate of HDHMR board = Rs. 1175.50 per sqm. Elevation area to be measured for payment. (Size of fridge cabinet = (3x2)ft). 121 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) 122 Carriage of materials by mechanical transport including loading, unloading and stacking. 123 Sand for brick work, plaster, rcc / cc work - 10 KM 124 Stone aggregate for rcc / cc work - 10KM 125 Bricks
