|
| 1 | Schedule \"A\" B/R |
| 2 | Material & Labour for preparation of old decorated surfaces of walls, plastered or un-plastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying one coat of white wash on walls, complete all as specified and directed by Engineer-in-Charge. |
| 3 | All as per item No 1 above but on ceiling, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for preparation of old surfaces of wall and applying one coat of oil bound distemper, complete all as specified and directed by Engineer-in-Charge. |
| 5 | All as per item No 3 here in before but on ceiling surfaces, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for preparation of old surfaces of wall and applying two coats of oil bound distemper, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & Labour for complete removal of existing treatment on old surfaces wall and application of 2-3mm thick wall care putty, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material & Labour for preparation of existing treatment of old surface including brooming down, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and grease spouts and cleaning with water on wall applying one coat of Acrylic emulsion (exterior weather coat) paint of any tint as approved, complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material & Labour for preparation of old decorated by brooming down scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and grease spouts and cleaning with water on wall applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & Labour for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & Labour for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Dismantling of floor, hearth or wall tiling, including cement mortar bedding (but not backing) and rubbish off the premises including removal of debris to a distance exceeding 1.5 but not exceeding 2.00 km, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for Non-skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick of size exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material & Labour for Non-skid Ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed or bedding layer in 1:4 Cement Mortar, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.,including removal of debries to a distance exceeding 1.5 Km but not exceeding 2.0 Km, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material & Labour for rendering 15mm thick in Cement Mortar 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement), complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material & Labour for cement plaster 5mm thick in Cement Mortar 1:3 on concrete surface as on ceiling finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material & Labour for preparation of new plastered surfaces of walls, providing one coat 3mm ofBirla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatible priming paint, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & Labour for preparation of new surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2.0 Sqm each, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply & Fixing for 100mm long mild steel butt hinges, medium weight, cold rolled, mild steel and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply & Fixing 150mm long aluminium anodised barrel tower bolt, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply & Fixing 150mm long aluminium handle cast type anodised, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply & Fixing aluminium alloy anodized sliding door bolt with hasp and staple 300mm, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply & Fixing in repairs 150mm long aluminium anodised barrel tower bolt, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply & Fixing in repairs 100mm long aluminium anodised handle, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & Fixing in repairs 300mm long mild steel ordinary rat rail rod pattern springs including roller and roller plate, complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & Fixing in repair 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply & Fixing 40mm thick Flush Shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/ frame to match commercial type on both side, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & Fixing 35mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkhats, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply & Fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material & Labour for preparing surfaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of Synthetic Enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply & Fixingin repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden/metallic door/window shutters with aluminium wire staples or necessary rubber beading and screws, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply & Fixing in repair 20mm dia aluminium curtain rod with brackets etc., complete all as specified and directed by Engineer-in-Charge. |
| 35 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply & Fixing 4mm thick glass sheet ordinary quality and glazing with oil putty/rubber beading/ M seal etc.,not exceeding 0.50 Sqm in each pane fixed to wooden/metallic frame, complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & Fixing in repair 20mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings including bends, elbows, unions etc., fixed on wall concealed or exposed /ceiling or laying in floors, complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & Fixing in repair 25mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings including bends, elbows, unions etc., fixed on wall concealed or exposed /ceiling or laying in floors, complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply & Fixing in repair vitreous china white wash down water closet pan (pedestal pattern) including fixing bolts, plastic seat cover with jet spray and including necessary flexible pipe connection, complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & Fixing in repair PVC valve less, syphonic action type, flushing cistern, low level with inlet, ball valve, float and handle including brackets, (The colour will also perfectly match with the EWC.), complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & Fixing in repair white vitreous china wash hand basin of size 580 x 440mm, fixed over & including MS brackets comprising of the following items :-(a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete.(b) PVC waste pipe 32mm dia 750mm long complete. |
| 42 | Supply & Fixing in repairs for 15mm dia fancy type Chromium plated bib tap of brass type cast copper alloy with crutch or butterfly handle, complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply & Fixing in repair 15mm size stop cock, cast copper alloy, chromium plated, fancy type with capstan head, concealed type, screwed down, screwed both end for iron pipes, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply & Fixing in repairs brass chromium plated shower rose 75mm size with arms 15mm inlet, complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & Fixing in repairs 15mm size pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nut, screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply & Fixing in repair 15mm bore Wall mixer 3 in 1 system with provision for both telephonic shower & overheadshower system, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply & Fixing in repair 5mm thick, 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply & Fixing in repair PTMT alloy bathroom mirror cabinet size 500 x400 mm wooden plugs with chromium plated brass screws and cup washers all as directed. |
| 49 | Supply & Fixing in repair stainless steel kitchen plate rack of size 31\" x 24\" x 10\" deep, fabricated with 0.63mm sheet fixed in position on wall, complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply & Fixing in repair Chromium plated corner glass shelf size 12 inch with bracket, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply & Fixing in repair brass chromium plated tubular towel rail 20mm dia \"D\" type 60 cm long between flanges, complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply & Fixing in repair Health Faucet (Hand shower) with 8mm dia 1 metre long easy flex tube and in chrome finish & wall hook, complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply & Fixing in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia., complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & Fixing in repair plastic sheet covers for water closet, black, closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & Fixing Stainless steel grating with or without hole of size 150mm, complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply & Fixing in repair PVC waste pipe of 32mm dia., complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply & Fixing in repair SS shop dish of size 100mm, complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply & Fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply & Fixing in repair 500 litres capacity triple layer (white), rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc., complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply & Fixing in repair 1000 litres capacity triple layer, rotational moulded, polythene water storage tank with cover (Cylindrical vertical with closed top), colour white, hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc., complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply & Fixing in repairs water tank covers for 500/1000 ltrs capacity tank, complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply & Fixing in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia., complete all as specified and directed by Engineer-in-Charge. |
| 63 | Material & Labour for cleaning of HDPE service water tank of capacity 500 ltr to 1000 ltr and circulating pipes at any position by removing sludge, mud, moss moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scrapping using wire brush draining out water from the tank and washing internally with water and bleaching powder (0.10 kgs of bleaching powder will be mixin 1 litre water) and againdraining out water from tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
