Upgradation of PHC Sallar, Block: Dachnipora, for year 2025-26- 1 Engagement of Manual Labour for clearance of site including disposal 2 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shaftswells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : 3 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shaftswells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 25m from cutting edge: All kinds of soil : 4 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. 5 Providing & Laying stone soling handpacked in foundation trenches including dressing, watering, compacting and all carriage upto site of work as complete job 6 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 7 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 8 Providing and laying in position precast RCC ring 0.8m dia, 0.15m high including loading unloading and carriage as a complete job (excavation to be paid separately) 9 ReinforcementofRCCworksincludingstraightening,cutting, bendingplacinginpositionandbindingallcomplete.TMT bars of grade Fe-500D or more. 10 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 11 Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms. 12 Dry random rubble masonry with hard stone in foundation and plinth: [Quarry Stone] 13 Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) [Quarry Stone] 14 Smooth finishing of the exposed surface of RCC/PCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing. 15 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.1 In colour such as White, Ivory, Grey, Fume Red Brow 16 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 17 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) with 3mm spacers, including grouting the joints with white cement and/or colour matching pigment. Size of tile 600x600 mm 18 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 19 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with epoxy grout (Payment for grouting of joints to be made separately). Size of tile 600x600 mm 20 Providing and fixing aluminum work for doors, windows, ventilators and partitions including glazing, panelling with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, handles, locks, tower bolts etc all complete as per architectural drawings and the directions of Engineer-in-Charge. Choukath 50x50x3mm and shutters 85x30x1.8mm [LMR] 21 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 22 Providing & fixing wood panelling 12mm thick on walls, ceiling including jambs, rails, cornice over 10mm MR ply strips and/or wooden battens frame achieving properly levelled surface fixed with rawl plugs after drilling necessary holes and finishing with a primer and polishing coat on exposed surface as a complete job incl carriage as per the directions of Engineer In-charge. 23 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. KD wood 30mm thick 24 Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete : 100mm x 10mm tower Bolt (windows) 25 Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete : 100mm Handle (windows) 26 Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete : 150 mm Hook and Eyes 27 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 28 Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work 29 Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm)complete 30 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work 31 Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 32 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 33 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 34 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix) 35 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. 36 Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm 37 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460mm bowl depth 200mm 38 Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. 39 Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.14.79.2 Orissa pattern W.C Pan of size 580x440 mm 40 Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 liter P.V.C automatic flushing cistern. 41 Providing and fixing geyser of approved brand (venus, racold, hindware etc) 50ltr capacity including all fittings as a complete job. 42 Providing and fixing geyser of approved brand (venus, racold, hindware etc) 25ltr capacity including all fittings as a complete job. 43 Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White 44 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe, 20mm OD(SDR-7.4) 45 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.. External work including trenching, refilling etc. PN-16 pipe , 25mm OD (SDR-7.4) 46 Extra for providing and fixing thermocol insulation tube covering to exposed parts of pipes to prevent icing as a complete job [LMR] 47 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. 48 Providing and fixing PTMT stop cock of approved quality and color.19.46.1 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. 49 Providing and fixing PTMT stop cock of approved quality and color.20 mm nominal bore 89 mm long, weighing not less than 88 gms. 50 Providing and fixing PTMT wall mixer of approved quality and color for geyser points + kitchen [LMR] 51 P/F Door Tee 100mm dia pvc of approved make type B (LMR) 52 P/F plain bend 100mm dia pvc of approved make type B 53 P/F 100mm dia pvc collar of approved make type B 54 P/F plain bend 75mm dia pvc of approved make type B 55 P/F p 75mm dia pvc collar of approved make type B 56 P/F soil waste disposal pipes 100mm pipes complete job 57 P/F soil waste ventpipes 75mm pipes complete job 58 P/F PVC cowel over vent pipe of approved quality type B 59 P/F door tee 75mm PVC complete job 60 P/F Ms stays and clamps for PVC pipe 75mm & 100mm 61 P/F floor traps of self cleansing complete job 75mm 62 P/F SS grating jali 100mm dia complete job 63 P/F Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm 64 Carriage of sand and stone aggregates By Mechanical Transport including loading, unloading and stacking 65 Carriage of Excavated Rock for lead of 10km By Mechanical Transport including loading, unloading and stacking 66 Provision for wooden benches in corridor and lawn, made of solid wood (KD wood) including a coat of primer and two or more coats of paint as a complete job as per the drawing and direction of engineer incharge. [To be paid as per actual measurement] 67 Provision for signboard& photographs 68 Provision for unforeseen
