Construction Of P.D.S Center At Dr.Ambedkar Nagar, Ward No.13 In Uthukottai Town Panchayat- 1 Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. 2 Cement concrete 1 : 4: 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. 3 Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9 X 43/8X 2 3/4 including finishing, curing, etc., complete complying with standard specification - 100CFT 4 Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc,Complete complying with stanard specification. 5 Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle including cost of materials and all labour charges etc., 6 Centering below Ground level 7 For column post 8 For roof slab, lintel, beam 9 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers 10 For foundation and basement 11 For superstructure in ground floor 12 Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1 : 2 : 4 mix using 10-12mm ISSHBG metal and the top rubbed smooth etc., complete complying with standard specification as directed. Rate for 10 m3 (1). 20mm thick for Residential Building (2).25mm thick. for Business office complex buildings, Bus stand, Shopping complex and School buildings. 13 Finishing the top of roof with one course of Pressedtiles of size 23 cm X 23 cm X 2 cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement 14 Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. 15 Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications 16 Painting two coats ready mixed Approved Exteriar Emulsion of first quality and of approved colour over a primingcoat including through scarbing clan removel ofone coat of priming with best Cement paintas directed by the department officers etc completeand including necessary plaster of paris whever regd.(S.l.No.358)-10sqm 17 Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., withbest approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with stan 18 Manufacturing and supplyingin position of MILD STEELDoor and WINDOWSwith openable shutters, outer frames and shutter frames shall be made out of steel sections conforming toI.S. 7452/1990.including cost of materials and all labour charges etc., 19 Supplying and fixing of rolling shutter with IsI specification which shall be of pull and push type made out of 18Gx3 lath section which consist of five main parts such as curtain lock plate guide channel rollers and hood covers these five main parts are made out of special components detailed below.including cost of materials and all labour charges etc., 20 Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 21 Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with P trap or S trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. 22 Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thic Light point fan point 23 Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150×100×113mmTW switch box for 5A - 3 pin- non inter lockingCS plugIncluding pin top with Plug point 24 Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150×100×113mmTW switch box for 5A - 3 pin- non inter lockingCS plugIncluding pin top with Power Plug point 25 Supply and fixing of 32 Amps DPIC switch of 500 V with fuse and neutral(side handle ) on suitable T.W.box withearth connection only.[SD no.136] 26 Supply and run of 2 of 1.5 sq.mm polythene insulated PVC sheathed heavy duty SC.Copper conductorof 1100 V grade on 7/20 GI bearer wire for service connection mains[SD NO. 62] 27 Supply and run of 2X1.5 sq.mm (22/0.3) polythene insulatedPVC sheathed heavy duty SC.Copper conductor of 1100 V grade in 25mm dia GI pipe(Clss B) suitably bent on bothends with necessary Angle iron upright and end supportes for Mains[SD NO. 67] 28 Supplying and fixing 1200mm sweep AC ceiling fan complete with stepped electronic 300W regulator with 300mmdown rod on the existing clamps [ SD .No 106] 29 Supply and fixing of single box type 4-40Wflourescent tube fitting with copper choke and condenser with TWround block on wall or ceiling with flourescent tube with PVC unsheathedcopper leads from terminals to the fitting ofTube Light [SD83] 30 Floor finishing with Ceramic tillesof size 30cm x 30cm x 6mm over the base plastering cement mortar 1:3 mix, 20mm thick pointing with using white cement 4kg/10sq.mt. inculing cost and conveyance of all materials and all labour charges. Etc. complete 31 Dadooing the walls with best approved quality colour glazed tiles of size 100 x 200 x 6mm set in CM 1:2 (One of cement and two of sand) 10mm thick and pointing with colour cement using 0.4kg per m2 neatly in all floors as directed etc., complete complying with standard specifications.
