|
| 1 | PRIVIDING AND FIXING ACOUSTICAL FALSE CEILING WITH 0.9 NRC : Sierra Mineral Fibre Acoustical Suspended Ceiling System SSR 22-23 no. 53.44 |
| 2 | Providing &Fixing inposition, Acoustical Ceiling made from Gypsum Plain Panels on approved heavy duty G.I. frame ceiling channels at 450 ctoc,& intermediate channels not more than 1200 ctoc,along with plywood forms suspended with Hangers from Roof, infront of 1000 Gsm synthetic wool 50 mm thick,with Paint,including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding ,as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete.SSR 22-23 no. 51.07 |
| 3 | Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area.wall primer with brush by adding mineral turpentine oil by 8 to10% or water by 15 to20%allowing to dry for 6 to 8 hours After applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1 st coat with brush water content water 40 to 45% or 65 to70%by role Applying paints Royale luxury emulsion 2 nd coat with brush with water content 40 to 45% or 65 to 70% by roller. (With prior approval of S.E.) SSR 22-23 no. 36.21 |
| 4 | Providing and applying pearl / luster finish paint of approved colour and shade to the existing plaster surface including scaffolding , preparing the surface,applying the acrylic wall putti etc.complete.SSR 22-23 no. 35.23 |
| 5 | Credestal @ 1200Lx450Lx650HT Providing & FixingofLOWHEIGHTCREDESTAL@1200LX450DX650H:-To be made out of Membrane Finish (2 Openable Shutter & 3 Drawer Pedestal in between)as per drawing. SSR 22-23 51.26 |
| 6 | Reception table : 2875x600x1050( RA attached)Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750 mm.Top : made from 25 mm Pre laminated Particle board.All edges are covered by 2 m m.Thk.PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18 mm both side pre laminated particle boards.All edges are covered by 0.8 mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY (WITHOUT MOUSE TRAY) :- Metal Powder Coated-Black Color,CPU TROLLEY:-Metal Powder Coated-Black Color ,3 DRAWER PEDESTAL UNIT having overallsize 392 L x 450D x 680 Ht. mm.with central lock and key.Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, SSR 22-23 51.26 |
| 7 | Study table : 825x600x750 ( RA attached) Library Area Table @ 1350Lx750Dx750HT Providing & Fixing of FREE STANDING TABLE @1350Lx750Dx750HT:-TOP to be made of 25m m thick Pre laminated particle board with PVC edge band,BENT LEG to be CHROME FINISH as per drawing.SSR 22-23, no. 51.29 |
| 8 | Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht .Providing and fixing Multiple Compartment Lockers @1140 L x 457 D x 1830 mm .Ht.with 12 Compartments , Complete body & shutter made of CRCASheet with powder coated finish as per approved color. SSR 22-23, no. 51.29 |
| 9 | Sofa Set 3+1+1Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length:182.5 (cms)Breadth (cms) : 100 (cms) Height (cms) : 100 (cms) Weight (Kilograms) : 66 (Kilogram) Seating Capacity: Five Seat SSR 22-23, No.51.35 |
| 10 | Providing and Fixing Vertical Blinds of approved Make and shade of 100 mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc.complete.(Sample to be final by EngineerIn-charge prior execution of work) SSR 22-23, No.51.20 |
| 11 | Providing & Arrangemnt of High Back Chair-TILT MECHANISM WITH MULTI LOCKING , HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GAS LIFT FOR HEIGHT ADJUSTMENT.SSR 22-23, No.51.41 |
| 12 | Providing & Arrangemnt of Mid Back , ECOCTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery olsterySSR 22-23, No.51.43 |
| 13 | Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. SSR 22-23, No.51.44 |
| 14 | Book Storage 1 : 2350 x 450 x 2400Wardrobe with Mirror @ 900LX 600DX 1965H Providing and Fixing Wardrobe with Mirror of size 900 L X 600 D X 1965 H The wardrobe side panels and doors are made up of 18 mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18 mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36 mm pre lamparticle board with decorative laminate on both sides.(18 mm Prelam Particle board and 18 mm batons on all sides to achieve 36 mm overall thickness). The exposed edges of the top are sealed with 2 mm thick PVC edge Banding . The top most part of the wardrobe has an aluminum hanger rod of EBCO make.One drawer of size 400 (W) x 150 (H) x 450 (D)made of 18 mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make.The wardrobe handles are Satin S S finish of 160 mm pitch.The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettichmake . Necessary good quality hardwares have been considered as required..DSR 22-23 ,no.51.57 |
| 15 | Library Storage 2 : 6000 x 600 x 2400Wardrobe with Mirror @ 900LX 600DX 1965H Providing and Fixing Wardrobe with Mirror of size 900 L X 600 D X 1965 H The wardrobe side panels and doors are made up of 18 mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18 mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36 mm pre lamparticle board with decorative laminate on both sides.(18 mm Prelam Particle board and 18 mm batons on all sides to achieve 36 mm overall thickness). The exposed edges of the top are sealed with 2 mm thick PVC edge Banding . The top most part of the wardrobe has an aluminum hanger rod of EBCO make.One drawer of size 400 (W) x 150 (H) x 450 (D)made of 18 mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make.The wardrobe handles are Satin S S finish of 160 mm pitch.The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettichmake . Necessary good quality hardwares have been considered as required..DSR 22-23 ,no.51.57 |
| 16 | Providing and fixing partitions made up of CCTW frame of size 75mm x 50 mm at 60cmc/cwith 9 mm thick commercial ply and 4 mm thick veneer on both sideswith French polish etc. complete.SSR 22-23 39.69 |
| 17 | PRIVIDING AND FIXING MODULAR ACOUCTICAL WOODEN WALL PANELLING: SSR 22-23 53.41 |
| 18 | Providing & Fixing in position ,Carpet more than 800+ gsm, made with 100%stain proof fibres of approved make along with 5 mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc completeSSR 22-23 ,No. 51.13 |
| 19 | 12 mm fixedtoughned Glass at entrance(RA attached) |
| 20 | Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900 mm X 750 mm X 450 mm With 12 mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18 mm Thick Water proofing Ply.The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. |
| 21 | Logo |
| 22 | Graphics |
| 23 | Artifacts |
| 24 | Wall Paper |
| 25 | Soft board |
| 26 | Supplying and erectingHMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.elecrical22-23, No.1-1-9 |
| 27 | Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.elecricalelecrical 22-23, No.1-1-10 |
| 28 | Supplying and erecting 25 mm dia. corrugated flexiblepolypropylene conduit elecrical 22-23, No.1-2 -2 |
| 29 | Supplying and erecting 10m HDMI cord low voltage grademinimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete..elecrical 22-23, No.1-8 -23 |
| 30 | Supplying and installingcat-6 cable suitable for networking as per specification no. WG-COC/NCelecrical 22-23, No.1-10-1 |
| 31 | Supplying, fixing, and configuring 24 ports, POE switch in provided rack as perspecification No. WG-NWC/ENSelecrical 22-23, No.1-11-3 |
| 32 | Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.elecrical 22-23, No.1-12-1 |
| 33 | Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAKelecrical 22-23, No.1-12-18 |
| 34 | Supplying and fixing 24 ports light guide unloaded interconnect unit, wall mounted type, with adapter panel for termination of optical fibre cables onwall in provided U rack complete as per specification no. WG-NAS/ LIU elecrical 22-23, No.1-12-8 |
| 35 | Supplying, installing, testing and commissioning of2kVA capacity online pure sine wave, with backup time of 03 hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPSelecrical 22-23, No.3-7-2 |
| 36 | Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.elecrical 22-23, No.3-8-12 |
| 37 | Supplying,Erecting,Testing & Commissioning 5 MP Full IP Dome Camera Complete. Camera Sensor 1/2.7\", 5.0 megapixel, progressive scan, CMOSLens [email protected] Distance 42 Meter DetectShutter Auto/Manual, 1 ~ 1/100000s Colour: 0.01Lux (F2.0, AGC ON)Minimum Illumination 0Lux with IR onDigital noise reduction 2D/3D DNRDay/Night IR-cut filter with auto switch (ICR)S/N >52dBIR Range Up to 30m (98ft) IR rangeWavelength 850nmIR On/Off Control Auto/ManualDefog Digital DefogWDR DWDRVideo Max. Resolution 2592 X 1944Video Compression Ultra 265, H.265, H.264, MJPEGH.264 code profile Baseline profile, Main ProfileFrame Rate Main Stream: 5MP (2592*1944), Min 25fps; Sub Stream: 720P (1280×720), Min 20fpsVideo Bit Rate 128 Kbps~16 MbpsOSD Up to 4 OSDsPrivacy Mask Up to 4 areasROI Up to 2 areasMotion Detection Up to 4 areasImage White Balance Auto/Outdoor/Fine Tune/Sodium Lamp/Locked/Auto2Digital noise reduction 2D/3D DNRSmart IR SupportFlip Normal/Vertical/Horizontal/180°Dewarping NAHLC SupportedBLC SupportedNetwork Protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL, QoSInterface 10/100M Base-TX EthernetCompatible Integration ONVIF (Profile S, Profile T), APICertifications Certifications CE: EN 60950-1/UL: UL60950-1/FCC: FCC Part 15(Include – 12 Month Fully Compressive Warranty) ( Rates are as per Sanct.Lt.No.431 dt.22.03..2022) |
| 38 | Supplying,Erecting,Testing & Commissioning 5 MP Full IP Bullet Camera Complete. Camera Sensor 1/2.7\", 5.0 megapixel, progressive scan, CMOSLens [email protected] Distance 60 Meter DetectShutter Auto/Manual, 1 ~ 1/100000s Colour: 0.01Lux (F2.0, AGC ON)Minimum Illumination 0Lux with IR onDigital noise reduction 2D/3D DNRDay/Night IR-cut filter with auto switch (ICR)S/N >52dBIR Range Up to 30m (98ft) IR rangeWavelength 850nmIR On/Off Control Auto/ManualDefog Digital DefogWDR DWDRVideo Video Compression Ultra 265, H.265, H.264, MJPEGH.264 code profile Baseline profile, Main ProfileFrame Rate Main Stream: 5MP (2592*1944), Min 25fps; Sub Stream: 720P (1280×720), Min 20fpsVideo Bit Rate 128 Kbps~16 MbpsOSD Up to 4 OSDsPrivacy Mask Up to 4 areasROI Up to 2 areasMotion Detection Up to 4 areasImage White Balance Auto/Outdoor/Fine Tune/Sodium Lamp/Locked/Auto2Digital noise reduction 2D/3D DNRSmart IR SupportFlip Normal/Vertical/Horizontal/180°Dewarping NAHLC SupportedBLC SupportedNetwork Protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL, QoSInterface 10/100M Base-TX EthernetCompatible Integration ONVIF (Profile S, Profile T), APICertifications Certifications CE: EN 60950-1/UL: UL60950-1/FCC: FCC Part 15( Non CSR) |
| 39 | Supplying, erecting, Testing & CommissioningCamera NVR 32 Channel System Specifications :32ch with 4K Real-time Live Preview Max 32Q Mbps incoming bandwidth with H.265 Compression, Decoding support upto 4 x 4K@30, 8 x 4MP@20 ON VIF Version 2.4 conformance VCA Search and Smart Search for Playback Support 8 SATA HDD up to 64TB with RAID Configuration, 2 USB 2.0,1 USB. |
| 40 | Supplying and Installation Testing & Commissioning of Surveillance Internal HDD (Hard Disk Drive) Internal HDD Supply ,Installation Testing and Commissioning for Surveillance HDDRecording Capacity 8TB. |
| 41 | Supplying, erecting, Commissioning & Testing Screen (108 Cm) /40 Inchpecifications General o Screen Size : 108 cm (43) • Screen Type : LED • HD Technology & Resolution : Full HD TV, 1920 x 1080 • HDMI : 3, USB : 1 • Launch Year : 2018 onnectivity Features : HDMI, 2 Side : USB o 1 Side Video Features • Contrast Ratio : Mega Contrast (Static) • Picture Engine : Hyper real • View Angle : 178 Degree • Panel Type : A+, Digital Noise Filter : Yes • LED Display Type : Direct • Aspect Ratio16:09 • Refresh Rateo 60 Hz • Other Video Features o PMI 300: Clarity, Color, Contrast, Active Noise Reduction, Dynamic Color Enhancer o Picture Mode: 8 Modes (Vivid, Standard, APS, Cinema, Cricket, Game, Expert1, Expert2) o Picture: JPEG, Digital Noise Reduction, Movies Support in USB Mode, MPEG H.264 Decoder o Response Time: 6.5 ms, Still Image, Wide Color Enhancer (Plus), Film Mode, Cricket mode Audio Features • Number of Speakers : 2 • Speaker Type: Down Firing with Bass Reflex • Sound Technology : Dolby Digital Plus • Speaker Output RMS : 20 W Warranty • Warranty Summary : 1 Year Comprehensive and 1 Year Additional on Panel. |
| 42 | Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. elecrical22-23, No.13-15-1 |
| 43 | Installation of fire extinguisherball |
| 44 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbartype) as per specification no. SW-SWR/MCBD |
| 45 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs,with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBD |
| 46 | Providing & erecting 3 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting andadjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides,with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 47 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 48 | Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 49 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 4.1TR (1218 cfm) to 5.0TR (1624 cfm)of suitable cfm having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordlessremote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oilcharge as per requirement during installation.AC |
| 50 | Supplying, erecting, testing and commissioning of 26HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitablegreen equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/controlpanel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerantpiping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 51 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete |
| 52 | Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 32mm complete. |
| 53 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor |
| 54 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 55 | Providing Communication Cable for AHU and ODU |
| 56 | Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories. |
| 57 | Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. |
| 58 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 59 | Providing annual comprehensive maintenance contract for 3TR to 4.5TR split/tower/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material |
| 60 | Supplying, installing, testing and commissioning of 25 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB ,MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. |
| 61 | Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 33 kV(UE), 3 x 150 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 62 | Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and roundshape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnaceroute etc.as per detailed designs and drawing or as directed including cutting, fabricating ,hoisting ,erecting ,fixing in position, making riveted/bolted/ welded connections and painting complete. SSR 22-23, No.23.12 |
| 63 | Supplying and laying rigid steel conduit 16 SWG 25 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WGMA/ CC. |
| 64 | Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC(1-1-9) |
| 65 | Supplying and layingHMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC(1-1-10) |
| 66 | Supplying and erecting HMS PVC conduit FRLS grade25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.(1-2-4) |
| 67 | Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) |
| 68 | Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) |
| 69 | Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-7) |
| 70 | Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) |
| 71 | Supplying and erecting modular type switch 16Aduly erected on provided plate and box with wiring connections complete.(1-6-2) |
| 72 | Supplying and erecting modular type 3 pin 6Amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-10) |
| 73 | Supplying and erecting modular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete.(1-6-11) |
| 74 | Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.(1-6-14) |
| 75 | Supplying and erecting modular type telephone socket one gangwith safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-15) |
| 76 | Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-17) |
| 77 | Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.(1-6-23) |
| 78 | Supplying and erecting modular type blanking plate two module, duly erected on provided plate & box.(1-6-25) |
| 79 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-35) |
| 80 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-36) |
| 81 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-37) |
| 82 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-38) |
| 83 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-39) |
| 84 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-40) |
| 85 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background(1-6-41) |
| 86 | Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm(2+1E ) FRLSH grade copper wire, modular type switch,earthing and required accessories as per specification No: WG-PW/SW(1-7-14) |
| 87 | Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modulartype switch, earthing and required accessories as per specification No: WGPW/ HW(1-7-15) |
| 88 | Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW |
| 89 | Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF |
| 90 | Wiring for plug on board withSwitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7-26) |
| 91 | Supplying and erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as perspecification No. WG-TW(1-8-1) |
| 92 | Supplying and installingcat-6 cable suitable for networking as per specification no. WG-COC/NC(1-10-1) |
| 93 | Supplying, fixing, and configuring8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.(1-11-2) |
| 94 | Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.(1-12-1) |
| 95 | Supplying and fixing42 U floormount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK(1-12-29) |
| 96 | Supplying and erecting LEDPanel Light(600mm X 600mm) Max. 35 Whaving CRCA powder coated housing,polystyrene diffuser havingsystem lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.(2-1-8) |
| 97 | Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22Wwith high transitivity diffuser withsystem lumens output ofMin.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%,THD<10%,p.f. >0.95, operating range of200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.(2-1-18) |
| 98 | Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt,CRI>80, CCT of 6500K and THD<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty.(2-1-22) |
| 99 | Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f.>0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50including driver with 1 year warranty. |
| 100 | Supplying, erecting, testing and commissioning ofself contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC(3-3-10) |
| 101 | Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 2500 VA digital pure sine wave inverter with backup time of ........ hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as perspeci fication no. AP-INV (3-6-4) |
| 102 | Supplying, installing, testing and commissioning of10kVA capacity onlinepure sine wave with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 1 phase output complete with all protectionsas per specification no. AP-UPS(3-7-1) |
| 103 | Supplying and erecting 12V/200Ah tubular battery with battery terminal wire,duly charged with 36 months warranty complete(3-8-6) |
| 104 | Supplying and erecting metal work in CRCA sheet including Iron work for supportswith fabrication ofboxes,panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete.(6-1-1) |
| 105 | Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) |
| 106 | Supplying and erecting 250 kVAr,3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In,peak inrush current capacity 300 Inand minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor unitswith detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC(6-7-17) |
| 107 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL |
| 108 | Supplying and erecting G.I. pipe ‘A’ class75 mmdia.erectedfor enclosingXLPEarmouredcable on wall/poleas per specification no. CB-CE(7-6-4) |
| 109 | Providing and erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware.(7-11-12) |
