|
| 1 | CONSTRUCTIONFOR CO - LOCATION CENTRE- IN PANAIYUR PANCHAYAT |
| 2 | Earthworkexcavationforfoundation(for narrow excavation)tofulldepth asper designed in allsoils and sub soilsexcept soft disintegratedrocknotrequiringblastingand hardrockrequiringblastingandbailingwater wherever necessary. Refilling the sides of foundationwith excavatedearth otherthan sand in layers of well rammed and compacted and depositing the surplus earth inplaces shownbythedepartmentalofficerswithan initialleadof10mandinitialliftof2mand clearingandlevelingthesiteetc.complete complying with standard specification. |
| 3 | Supplying and filling in foundations and basementwithfillingM-sandinlayersnot exceeding 15 cm.thick,well watered,rammed and consolidated etc. complete complying with standard specifications. |
| 4 | Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 5 | Plain Cement Concrete 1 : 4 :8 ( one part of cement,fourpartsofsandandeightpartsof hard broken stone ) using 40 mm gauge hand brokenhardbrokengranitestonejelly complyingwithstandardspecificationsinfoundations and basement. |
| 6 | Brick work with cement mortar 1:5 mix using country bricks of size 83/4\"x41/4\"x2 3/4\" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete. |
| 7 | Brick work with cement mortar 1:5 mix using country bricks of size 83/4\"x41/4\"x2 3/4\" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete. |
| 8 | Providingandconstructing110mmthick (Plus or minus 5mm) brick masonry in cement mortar 1:3 for partition walls using well burnt best quality bricks including supplyingandlaying1No6mmdiaMS bars ateveryfourthlayerincluding scaffolding curing cost of reinforcement etc.allcompleteasperspecificationsand drawingsasdirectedbytheEngineerin-charge. |
| 9 | Reinforced Cement concrete 1:11/2:3 mix using 20 mmHBGS metal inculding cost and coveyance of all materials to site including labour for mixing laying,curing etc complete., |
| 10 | Reinforced Cement concrete 1:11/2:3 mix using 20 mmHBGS metal inculding cost and coveyance of all materials to site including labour for mixing laying,curing etc complete., |
| 11 | Supplying and fabrication of steel,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc |
| 12 | Supplyingand erecting Centeringand Shuttering for Squareandrectangularcolumnsandsmall quantitiessuchassunshades,parapetcum drops, window boxing, fin projections and othersimilar works. |
| 13 | Supplyingand erecting Centeringand Shuttering for Squareandrectangularcolumnsandsmall quantitiessuchassunshades,parapetcum drops, window boxing, fin projections and othersimilar works. |
| 14 | Manufacturing, supplying and fixing of Steel doors with following specification.MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame.Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame.18 G CR Sheets of best quality is laid as panel in the shutter frames.18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwiching the CR Sheet for rigidity. Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2Nos, for shutter is provided.6 Nos. of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door.Tower bolt 2 Nos. at the top provided. |
| 15 | An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc.,complete |
| 16 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 17 | Terrace flooring with one coarce of old &new machine pressed tiles of size 23x23x6mmusing Cm 1:3 mix with water proofing compound 2% weight of cement used and the joints pointed with same |
| 18 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mmof approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 19 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining,curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers). |
| 20 | Plastering with Cement Morter 1:5 mix 12 mm thick inculding cost and conveyanceof all materials to site and labour charges for curing etc |
| 21 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surfaceofceilingincludingfinishingthejointssmoothywithgrindingmachine andthesurfaceshallbethoroughlycleanedoutofdustandscrubbing. The Surfaceshallthen be allowed todryforatleast 48 hours. Itshall then be sand papered(waterproofabrasivesheet)togiveasmoothandevensurface. Any unevenness shall be made good byapplying 1stcoatofputty mixedwithwater on theentiresurface includingfillingup theundulations and applying2ndcoat ofputtyafter 6 hoursof 1stcoatofputtyandth.ensandpapering(waterproofabrasive sheet)thesame after itis dry and finishing the surface smoothly, etc.,complete complying with standard specifications and as directed by the DepartmentalOfficers. [Theratesareinclusiveofhirechargesforgrinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete].The Putty shouldbegotapprovedbytheExecutive Engineerbeforeuse onwork. (Based on SoR 2024-25) |
| 22 | White washing two coatsusing shell lime including cost and conveyance of all materials to site and all labour charges etc comopletefor 100 Sqm |
| 23 | Distember two coatsover priming coatinculding cost and conveyance of all materials to site and all loboure charges etccomplete |
| 24 | Exterior Emulision two coatsover priming coatinculding cost and conveyance of all materials to site and all loboure charges etccomplete |
| 25 | Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., |
| 26 | Provision for Electrical work charges |
| 27 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
