Tender For construction of Medical Room Shelter At Rr Camp Sonigam.- 1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : 2 P/L of dry stone solling hand packed in foundation and plinth incld. All carriages etc complete. 3 Supplying and filling of RBM/RBM incld. Spreading, watering, dressing, consolidation incld. Cost and carriage of RBM etc complete. 4 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 5 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) 6 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) 7 Reinforced cement concrete work in beams, suspended floors, roofs , balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 8 Reinforcement for RCC work incld. Straightening , bending and placing in position and binding all complete ending and placing in position and binding all complete incld. All carriages TMT bars 9 Centering and shuttering including strutting, propping etc. and removal of form for 10 Foundations, footings, bases of columns etc. for mass concrete 11 Suspended floors, roofs, landings, balconies and access platforms. 12 Edges of slabs and breaks in floors and walls 13 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) 14 12 mm thick plain cement mortar bands in cement mortar 1 : 4 (1 cement : 4 fine sand) 15 6 mm thickcement plaster in 1:3 (1 cement : 3fine sand) cement mortar 16 Providing and applying white cement based putty of specified thickness, of approvedbrand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thickness 17 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 18 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported Wood. 19 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 20 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Kiln seasoned & chemically treated hollock wood Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR typeImported wood. 21 Providing and fixing panelled or panelled andglazed shutters for doors, windows and clerestory windows fixing with but hinges of required size with necessary screws, excld. Panelling which will be paid forseparately, all complete as per direction of Engineer-in-charge. Kiln seasoned & chemically treated hollock wood ( Note: but hinges and necessary screws shall be paid separately ) windows 35 mm thick Imported wood. 22 Providing and fixing 30 mm wire guage shutters for doors, windows and clerestory windows fixing with but hings of required size with necessary screws, excld. Panelling which will be paid for separately , all complete as per direction of Engineer-in-charge. Imported wood. 23 Providing and fixing of 4 mm thick pannels of plain glass for fixed glazing pannels/shutters (only pannel area to be measured) incdl. Cost of teak wood beadings of required size complete. 24 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 25 Providing and fixing of Hardware fittings incld cost of nails etc. in door , window shutters complete job. (aluminium make). 26 Tower bolts 100 mm 27 hinges 100 mm 28 handles 100 mm 29 handles 150 mm 30 Door stopper 31 L drops 32 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete: 50 mm thick with 20mm nominal size stone aggregate. 33 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 34 Carriage of various materials by mechanical transport incld. Carriage, loading, Unloading etc from source to site or work 35 Aggregate from avg lead of 10 kms 36 Sand from Sangam avg. lead of 15 kms 37 Bricks from Mirbazar kiln avg lead of 15 km 38 P/F of electric items using Havells , imperial or equilent using copper wire1.5 sqmm 2.5 sqmm, 6 AMP , 10 AMP , DP switches for all sort of electricfication complete job as per directions or Engineer-in-charge. 39 Heating points 40 Lighting Points 41 Fan Points 42 Charging Points
