}

Tender For Acp Sheet & Canopy Work At Epfo Plot No 43, Sec -44, Gurugram Haryana 122003 (2023-24) (Gurugram) - Disposal Of Moorum/Building Rubbish/ Malba/ Similar Unserviceable, Dismantled Or Waste Material By Mechanical Transport Including Loading, Trans, gurugram-Haryana

Uttar Pradesh Small Industries Corporation Limited has published Tender For Acp Sheet & Canopy Work At Epfo Plot No 43, Sec -44, Gurugram Haryana 122003 (2023-24) (Gurugram) - Disposal Of Moorum/Building Rubbish/ Malba/ Similar Unserviceable, Dismantled Or Waste Material By Mechanical Transport Including Loading, Trans. Submission Date for this Tender is 10-09-2025. Shed Construction Tenders in gurugram Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

50993686
Tender For Acp Sheet & Canopy Work At Epfo Plot No 43, Sec -44, Gurugram Haryana 122003 (2023-24) (Gurugram) - Disposal Of Moorum/Building Rubbish/ Malba/ Similar Unserviceable, Dismantled Or Waste Material By Mechanical Transport Including Loading, Trans
Tender
Indian
Haryana
Gurugram
10-09-2025

Tender Details

Tender For Acp Sheet & Canopy Work At Epfo Plot No 43, Sec -44, Gurugram Haryana 122003 (2023-24) (Gurugram) - Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge 2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 3 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 4 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin- charge. 5 15 mm cement plaster on the rough side of single or half brick wall of mix 6 1:4 (1 cement: 4 fine sand) 7 Centering and shuttering including strutting, propping etc. and removal of form for 8 Columns, Pillars, Piers, Abutments, Posts and Struts 9 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 10 1:1½:3 (1 cement : 1½ coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25%) ) 11 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: 12 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose 13 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cuting, hoisting, fixing in position and applying a priming coat of approved steel primer, induding welding and bolted with special shaped washers etc. complete. 14 Hot finished welded type tubes

Key Value

Document Fees
INR 1180 /-
Tender Value
INR 12.71 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail