Tender For Provn Of Store Room In Mt Area At Fd Regt At Mil Stn Agartala; 1 Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil. 2 Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/ loose soil. 3 M & L hard core of gauge n. exc 63mm in broken bricks, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces all as specified. 4 M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate all as specified. 5 M&L for Brickwork with old size subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed. 6 Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. 7 Removing excavated soil exc 250m but n exc. 500m & depositing where directed at a level n exc. 1.5 m above the starting point all as specified.. 8 M&L for M-20 Nominal Mix , 20 mm aggregate for Foundations, including rafts, footings, foundationbeams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified. 9 M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat all as specified.. 10 M&L RCC M-20 Nominal Mixusing 20 mm graded aggregate in Columns, pillars, piers, posts and struts all as specified.. 11 M&L for Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions all as specified. 12 M&L RCC M-20 Nominal Mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified. 13 M&L for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat all as specified. 14 M&L RCC M-20 Nominal Mixusing 20 mm graded aggregate in Chajjas all as specified. 15 M&L Formwork to chullah hoods, chajjas, troughs & similar items including edges Fair finished surfaces of concrete flat all as specified. 16 M&L for TMT bars10 mm dia and over, cut to lengh, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than0.9mm dia or securing with clips. 17 All as per item ser No. 16 but as in stirrups, spacers and binder, 8mm dia TMT bar 18 M&L for Sand filling under floors or in foundation including watering & consolidation all as specified. 19 M & L 75 mm thick PCC type D-2 1:4:8 ( 40mm graded stone aggt) in sub base of floor all as specified. 20 M&L for 40mm thick PCC (1:2:4)type B1 20 mm graded stone aggregate fair and finish with using extra cement complete all as specified and directed. 21 M&L for Glass dividing strips, 3 mm thick and width 38mm complete all as specified 22 M & L 75mm thick PCC 1:3:6 type B-2 ( 40mm graded aggregate) thick as in Path & plinth protection& finishing the surface even & fair whtiout using extra cement complete all as specified and directed. 23 M&L Pre-painted chequred cement concrete tiles 300 mm x 300mm x 22 to 25 mm thick set, jointed and pointed in neat cment slurry in in floors with gray cement and no pigments, over 15mm thick screed bed in CM 1:4, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and as directed 24 M&L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc.of Cross section exc 25 Sqcm and n exc 50 Sqcm complete all as specified 25 M & L 15mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 to be finished fair and even with out suing extra cement all as specified. 26 M&L 15mm thick rendering in CM (1:4) on fair faces brick work/ concrete surfaces mixed with integral water proofing compound @ 2% by wt of cement, finished even and fair complete all as specified.(Note: Water proofing compound measured & paid separately) 27 Supply only integral water proofing compound 28 M & L two coat ofwhite wash on wallsincluding preparation of new surfaces complete all as specified and directed. 29 M & L two coats of cement based paint over alkaline primer as per manufacturer instruction on external surfaces of walls and preparation of new plastered surface complete all as speified. 30 M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and preparation of new plastered surface complete all as speified. 31 S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. 32 S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed. 33 S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed. 34 S&F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or weldedand making good disturbed surface of wall complete all as specified and as directed. 35 S&F of 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane 36 M&L framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work all as specified and as directed. 37 M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chromecomplete all as specified 38 M&L of two coat of synthetic enamel paint over one coat of red oxideon new steel surfaces of any description over 10cm in width or girthincl preparation of surfaces complete all as specified 39 S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc size of frame 125 x60 mm complete all as specified. 40 M & L for PCC type C-1 (1:3:6) using 20mm graded stone aggreagate as in bed block for fixing of hold fast filling concrete in door frameincl necessary form work complete all as specified. 41 S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. 42 M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed. 43 S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified. 44 S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised all as specified. 45 S&F of 200 mm longanodised barrel tower bolt of extruded section all as specified. 46 Removing surplus soil to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and as directed 47 Supply, Laying, connecting, testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable with stranded alluminium conductors 10 sqmm x 2 core,1100 Volt grade, laid in trenches / surface / wall / roof / pole / through pipe,compleate all as specified and as directed Note :- (i) Pipe and bricks for cable protection and sand cushioning shall be measured and paid separately as per site. 48 Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and as directed.Note:- Punned depth shall only be measured and paid. 49 S & F bricks well burnt sub class ‘B’ bricks in trenches on cable as cable protection across the length of the cable (width wise) complete all as specified and as directed. 50 Supply and lay GI pipe 50 mm bore (dia) light grade in trenches/road/surface/pole/wall crossing for protection of cable with necessary fittings as required complete all as specified and as directed. 51 Cutting hard standing / road for laying of cable / protection pipe complete all as specified and as directed. 52 Material and labour for PCC (1:4:8) type D-2 (using 40mm graded aggregate) for filling and making good of disturbed surfaces of road/hard standing etc complete all as specified and as directed 53 Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site including suitable size ofGI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one wayswitch complete all as specified as directed.Note for item Nos.53 & 54 : (i)Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate.(ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate(iii)Cost of chase cuttingforconduit wiring shall be included in the qouted rate 54 Material and labour for point wiring (Concealed type)with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site including suitable size ofGI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board completeall as specified as directed. 55 Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,5 and 15 Amps, flush type ISI marked complete all as specified and as directed. 56 Materials & labour for switch piano flush button 5/6 Amps single pole, 1 way 240 V ISI marked complete all as specified and as directed. 57 Materials and labour for ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed. 58 Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. 59 Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. 60 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete completeall as specified and directed. 61 Supply & fixing MCB DB (Double door) SPN, 8 way sheet steel with bus bar, din rail, neutral link and earth bar with fitting & fixtures all as specified and directed. 62 Supply andfix MCB single pole32 amps, 240 volts, 10 KA, C series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. 63 Supply andfix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, C series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. 64 Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part-I. 65 NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule A notes for details.
