|
| 1 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame areanot exc 1.5 Sqm each, complete all as specified and directed. |
| 2 | All as per item No 01 but area exc 1.5 Sqm but not exc 4 Sqm each.Note for Sl item No 1 & 2 :-The rates quoted are deemed to be included for cutting hold fasts for removal of chowkhats/frames. |
| 3 | M&L for providing and fixing factory made uPVC white colour fixed window framearea exceeding 1 Sqm but n exc 2 sqm each made of extruded profiles with wall thickness of 2.3mm ( +0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\"zinc alloyed (white powder coated), stainless steel (SS 304 GRADE) friction hinges to the dide / top hung uPVC window, (size 250X19 X1.9mm) with multi point locking system] and 5mm thick glazing with selected quality glass, complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 4 | M&L for providing and fixing factory made uPVC white color Sliding window area not exc 2sqm eachThree track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm). sliding sash (42mm x 67mm). sliding mesh sash(42*57mm)Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos,sliding Sash (30mm x 18mm),sliding mesh sash(26*10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system . stainless steel wire cloth 0.36 mm nominal dia of wireand average width of aperature 1.40 mm and required assoceries . Net opening will be measured for payment purpose, complete all as specified and directed.Note: The unit rate quoted by contractor includes cost of glass and excludes all other connected accessories. Net opening will be measured for payment purpose. |
| 5 | All as per item No 4 above but area exceeding 2 sqm. |
| 6 | S&F 5.5mm thick sheet glass selected quality plain/ tinted in squares n exc 0.5 sqm each pane and fixed with glass putty or beading, complete all as specified and directed. |
| 7 | S&F 5.5mm thick sheet glass selected quality plain/ tinted in squaresexc 0.5 sqm each pane and fixed with glass putty or beading, complete all as specified and directed. |
| 8 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed. |
| 9 | M&L for bircks works with sub class \"B\" bricks straight or curved on plan exc 6m mean radious, built in cement mortar 1:6, complete all as specified and directed. |
| 10 | Taking down cement plaster or cement lime plaster on brick walls etc including raking out of joints,hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 11 | M&L for rendering 15mm thickin cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement on brick/concrete surfaces, finished fair and even without using extra cement, complete all as specified and directed.Note: WPC shall be measured and paid seperately. |
| 12 | M&L for 15 mm thick rendering in cement mortar 1: 6 on brick/concrete surfaces,finished even and smooth without using extra cement, complete all as specified and directed. |
| 13 | Supply only intergal waterproofing compound, complete all as specified and directed. |
| 14 | Dismantling AC/fibre glass translucent corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings, complete all as specified and directed. |
| 15 | Dismantling wrought iron work or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 16 | M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-290 (Gde E-165), complete all as specified and as directed. |
| 17 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement as per design approved by Eng-in-charge, complete all as specified and directed. |
| 18 | S&Fplates (plain or chequred) channels, square cut or notched (ordianry and counter sunk) forming holes, without any attachment confirmingFe 410-W(gde-E-250) Quality- A, complete all as specified and directed. |
| 19 | S&F of Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. |
| 20 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws, complete all as specified and directed. |
| 21 | M&L for preparation of new plastered surfaces of wall and applying two coats of exterior acrylic emulsionpaint over a coat of primer in camouflage pattern, using minimum 3 different approved tint/ colour as approved by GE, complete all as specified and directed. |
| 22 | M&L for preparation of newplastered surfaces of wall and applying three coats ofwhite wash, complete all as specified and as directed. |
| 23 | M&L for preparation of old surfaces of steel and iron of any description over 10cm width or girth and applying twocoat of synthetic enamel paint over a primer of red oxide,zinc chrome of any tint/ colour as approved by GE, complete all as specified and directed. |
| 24 | M&L for preparation of old plastered surfaces of wall and applying two coats ofdistemper oil emulsion, complete all as specified and as directed. |
| 25 | M&L for preparation of new surfaces of steel and iron of any description over 10cm width or girth and applying twocoat of synthetic enamel paint over a primer of red oxide,zinc chrome of any tint/ colour as approved by GE, complete all as specified and directed. |
| 26 | Hacking out broken glass (any size shape, thickness, quality or description) from wooden / metalframe glazed with putty or fixed with beads having area not exc 0.50 sqm in each pane, complete all as specified and directed. |
| 27 | S&F of powder coated (minimum thickness of powder coating 50 micron)aluminium frame of size 100mmx44mmx1.5mm) for doors, window, ventilators with one or more rebates including joinng cleat for fixing etc, complete all as specified and directed. |
| 28 | S&F forpowder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,2 Nos tower bolt,lock,door stopper, anodised aluminum snap beading screws etc, complete all as specified and directed.Note :- Sheet glass and ACP sheet & fitting shall be measured and paid seperately. |
| 29 | S&F 5mm thick ACP sheetfixedto Alumminiam door frame work using essential requrement as beading etc, complete all as specified and directed. |
| 30 | S&F factory made upvc white colour fixed glazed window / ventilator made of ( small series) frame 47*50 mm mullion 47*68 mm both having wall thickness of 1.9+-0.2 mm and single glazingbead of approiaye dimension ( Area up to 0.75 sqm) comprising of upvc multi chambered frame and million (where ever required)extruded profile duly reinforcedwith 1.60+-0.2 mm thick galvanised mild steel section made from roll forming process of required length ( shape and sizeaccording to upvc profile ) , upvc extruded glazing beads of approiate dimension , EPDM gaskeet, G.I Fasterners 100*8 mm size for fixing frame to finished wall ,plastic packerss,plastic caps and necessary stainless steel screw etc profile of frame shall be mitred cut and fusion welded at all corner, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of requred size Note: (i) Glass shall be measured and paid seperately.(ii) For upvc frame, sash and mullion extruded profile minus 5% tolerance in dimension i.e in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be acceptable but nothing extra admissible on this account. |
| 31 | S&F of 24mm thick toughened glass consisting of6mm ref titenium blue SG(STB-136) toughened glass plus 12 mm air gap with argon gas plus 6mm cl toughened glass i.e 24mm total thickness-RGless then 1 Sqm, complete all as specified and directed. |
| 32 | S&F of 24mm thick toughened glass consisting of6mm ref titenium blue SG(STB-136) toughened glass plus 12 mm air gap with argon gas plus 6mm cl toughened glass i.e 24mm total thickness greater then 1 Sqm but less then 2 Sqm, complete all as specified and directed. |
| 33 | Demolition of cement concrete (unreinforced) in ground floors and paving’s n exc 15cm thickness below or above ground leveland removing the same out side MoD land, complete all as specified and directed. |
| 34 | M&L for 75mm thick cement concrete type B- 2, 1:2:4 (40mm graded stone aggregate) as insub base finished even and fair surface without using extra cement, complete all as specified and directed. |
| 35 | M&L sand filling under floors or in foundation, complete all as specified and directed. |
| 36 | M&L for 80mm thick Machine pressed precast concrete interlocking paver block (M-40 Grade) any shape and size confirming to IS 15658-2006 laid over sand cushioning, complete all as specified and directed.Note :-Sand cushioning shall be measured and paid seperately. |
| 37 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description, complete all as specified and as directed. |
| 38 | MSL for exposed Gl frame / grid system duly powder coated for module size of 605x605mm suitable for lay-in aluminium/mineral fibre ceiling tiles, having main \"T runner of 24mm size, suspended at 1200mm C/C and cross \"T\" runner of 24mm size, suspended at 1200mm C/C with interlocking arranagements to form grid 600x600mm, perimeter runner/channel of 15mm size, main and cross \"T\" runner supported by 4mm Gl rod from slab/Root/Wall angle etc with and including all taking down and refixing of electrical fixing and fixture or any type of of accessories and making good of disturbed wall surfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as specified and directed. |
| 39 | M&L for Metal False Ceiling, lay-in type, 0.50mm thick, having tegular edge profile, duly powder coated, perforated type suitable for false ceiling grid/frame module of 600x600mm size, complete all as specified and directed. |
| 40 | S & F Providing and fixing Gypsum Board 8mm thick in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size, complete all as specified and as directed. |
| 41 | S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site, complete all as specified and directed. |
| 42 | Dismantling floor hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 43 | M&L for 25mm thick PCC type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement, complete all as specified and directed. |
| 44 | M&L for light shade Virified Ceramic tiles 9-10 mmthick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement motar 1:6, complete all as specified and directed. |
| 45 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but notexceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement motar 1:6, complete all as specified and directed., complete all as specified and directed. |
| 46 | M&L for glazed ceramic coloured tiles invertical surfaces as Dado/Skirtingof 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles, complete all as specified and directed. |
| 47 | Excavationin trenches notexceeding 1.5mwide and n exc 1.5m depth for foundation etc for shaft wells, esspits, manholes , pier holes etc not exc 10sqm on plan and n.exc 1.5m in depth andgetting outsoft/ loosesoil, completeall as specified & directed. |
| 48 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, completeall as specified & directed. |
| 49 | Removing excavated materialto a distance not exceeding .5 kmand depositing where directed at a level not exceeding 1.5m above the starting point, completeall as specified & directed. |
| 50 | M & L for Plain Cement concrete in foundations, filling and mass concrete 1:4:8 Type D2 using 40 mm graded stone aggregate, completeall as specified & directed. |
| 51 | M&L Mild steel bars TMT 10 mm dia and over cut to length bent to shape required including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, completeall as specified & directed. |
| 52 | All as per item No. 53 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 53 | M&L for cement concrete Type B-1 1:2:4 (20mm graded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.;sement slabs, under-reamed piles and mass concrete, completeall as specified & directed. |
| 54 | M&L for stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc (Fe-410-W(Gde E-250, Quality-A), completeall as specified & directed. |
| 55 | S&F rolled Mild steel plates plain or chequered square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-410-W, Gde E-250), Quality-A), completeall as specified & directed. |
| 56 | M&L forpreparation of surfaces on new steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primerof any description, over 10 cm width or girth, completeall as specified & directed. |
| 57 | M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer above 2 mm thick putty on new surfaces, complete all as specified and directed. |
| 58 | M&L for Providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete, complete all as specified and directed.Note : Reinforcement bars shall be measured and paid seperately. |
| 59 | M&L for non skid jointless cerermic coloured tiles(Ist quality) 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in neat cement slurry and pointed in white or coloured cement with pigment over and including 15 mm thick screed bed in cement motar 1:6, complete all as specified and directed. |
| 60 | S&F500 Ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including demolition of existing RCC tank of any description and removing the debris away from the site, complete all as specified and directed. |
| 61 | S & F 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 62 | S & F Wash down water closet (Pedestal pattern) including seat cover and stainless steel water jet including connection to drain pipe (outgoing pipe) and to flush pipe, anti syphonage pipe etc, complete all as specified and directed. |
| 63 | S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 64 | S & Fvitreous china wash hand basin white flat back size 550mmx400mm excluding , waste chaina and plugand porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand , fancy type pillar taps cast copper alloy chromium platedof 15mm bore, wate coupling and waste pipe, complete all as specified and directed. |
| 65 | S&F 600 mm x 450 mm beveled as mirror of selected quality glass,mounted on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washers, complete all as specified and directed. |
| 66 | Supply and fixing only PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 67 | S & Ffancy type pillar taps cast copper alloy chromium plated Swan neck screwed down high pressure with crutch or butterfly handle of 15mm bore, complete all as specified and as directed. |
| 68 | S & Ffancy typestop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle of 15mm bore, complete all as specified and as directed |
| 69 | S & Ffancy type bib tapcast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle for iron pipe or brass ferrule and fixing of 15mm bore pipe, complete all as specified and as directed. |
| 70 | S&FHealth faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipes with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 71 | S&F brass chromium plated Tubular towel rail, 20mm dia, 60cm long bitween flage fancy type, complete all as specified and directed. |
| 72 | S&F PVC connection pipe 15mm dia with PTMT nut for length 450mm, complete all as specified and directed. |
| 73 | S&F CPVC pipes outer dia 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors (including all fittings), complete all as specified and directed. |
| 74 | S&F CPVC pipes outer dia 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors (including all fittings), complete all as specified and directed. |
| 75 | S & F Solid PVC door frame of size 50mm x 47 mm made ot of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening, complete all as specified and directed. |
| 76 | Supply and fixing factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC \"C\"channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for TOP rail Panelling of plain colour PVC sheet to be fitted in MS Frame welded/sealed to the stiles & rails with suitable PVC shet beading and jointed together with solvent cemnt supply and fixing in frame, complete all as specified and as directed. |
| 77 | S&F soap dish vitreous china white approximate size 160X160X90mm etc, complete all as specified and directed. |
| 78 | S&F Toilet Paper holderwith flat recessed type stainless steel, complete all as specified and directed. |
| 79 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, step clamps, including all fittings (Any type of \"T\"/tee, bend, Y, Branch piece single/double, couplers, reducers, vent coil, access door, junction single/double, equal/unequal, any type of trap (Floor trap/Gully trap etc) with grating etc, 75mm dia, fixed to walls/floor/trenches etc, complete all as specified and directed. |
| 80 | All as per item No. 79 here in before but for110mm dia pipes, complete all as specified and directed. |
| 81 | M&L for RCC pipes class NP2 of 150mm dia laid and jointed with collars, complete all as specified and directed. |
| 82 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipe including packing to drain pipe and hunching against sides of pipe for 150mm dia pipes, complete all as specified and directed. |
| 83 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed. |
| 84 | S&F Gl frame size 605x605mm work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel withconnecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. |
| 85 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 86 | S&F 5.50mm thick sheet glass selected qualitytinted in squares n.exc 0.5 sqm each pane, complete all as specified and directed. |
| 87 | All as per itemNo. 86 above b but exc 0.5 sqm each pane, complete all as specified and directed. |
| 88 | M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles, complete all as specified and directed. |
| 89 | M&L granite slab (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to matchthe shade of granite, complete all as specified and directed. |
| 90 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation, complete all as specified and directed. |
