Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-09-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-09-2025 |
| Sl. No. | Item Description |
| 1 | 34W/CAP-01/2025-26 : ADDN/ ALTN TO ORP BLDG (BUILDING WORK INCL INTERNAL SERVICES B/R PORTION) |
| 2 | Demolition of cement concrete (reinforcement) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) and removing rubbish from site to out of MoD land, complete all as specified and directed by Engineer in Charge. |
| 3 | M&L for rough finished, flat Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed by Engineer in Charge. |
| 4 | M&L for reinforcement cement concrete (nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engineer in Charge. |
| 5 | M&L for Mild steel TMT barbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer in Charge. |
| 6 | Demolition of brick tiles or terracing tiles single layers on roof surfaces from at height up to 15 mtr and removing the demolished material from site, complete all as specified and directed by Engineer in Charge. |
| 7 | Demolition of mud phuska in roofs, any thickness including plastering/pcc padding and leaping (where full thickness removed or only a part thereof), including removing demolished material from site to out side of MoD land, complete all as specified and directed by Engineer in Charge. |
| 8 | M&L for roughening of roof surfaces by wire brushing and cleaning top surfaces of cement concrete, roof slab, including flashing and junction of parapets etc and brushing neat cement slurry with 3 kg of cement per sqm, complete all as specified and directed by Engineer in Charge. |
| 9 | M&L for cement concrete 1:2:4 type B-2 (using 20mm stone graded stone aggregate) as in roof padding, complete all as specified and directed by Engineer in Charge. |
| 10 | M&L for 15mm thick Screed bed or bedding layer in cement mortar 1:3, laid on roof, mixed with water proofing compound when concrete is green, @ 200ml per 50 kg of cement or as per manufacturer instructions, complete all as specified and directed by Engineer in Charge.(Note -Water proofing compound shall be measured and paid separately). |
| 11 | Supply only liquid water proofing compound, ISI marked, complete all as specified and directed by Engineer in Charge. |
| 12 | M&L for UV stable single component fibre reinforced elastomeric liquid applied waterproofing membrane having solid content of 55% formulated with PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in two coats (10 to 12 hrs gap between each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in three coats. The vital physical and chemical parameters shall be as under. Min elongation at break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be applied with brush or roller Also, proper surface preparation along with coving at corners is must, complete all as specified and directed by Engineer in Charge.Note:-(i) The work shall be executed by the authorized applicator of the manufacturer only. (ii)The authorized applicator of manufacturer shall be approved by GE. (iii)The colour of finish shall be decided by the GE. |
| 13 | Demolition of brick or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facing, dressed stonework and precast concrete articles, including removing rubbish from site, complete all as specified and directed by Engineer in Charge. |
| 14 | M&L for Brick work with subclass B bricks, straight or curved on plan exc 6.00 mtr mean radius, built in 1:4 cement mortar, complete all as specified and directed by Engineer in Charge. |
| 15 | M&L for brick work with sub class \"B\"brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall, complete all as specified and directed by Engineer in Charge. |
| 16 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed by Engineer in Charge. |
| 17 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed by Engineer in Charge. |
| 18 | M&L for 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete wall surfaces and finishing the surface even and smooth (without using extra cement) with water proofing compound @ 200ml per 50 kg of cement or as per manufacturer instructions, complete all as specified and directed by Engineer in Charge.(Note -Water proofing compound shall be measured and paid separately). |
| 19 | M&L for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and directed by Engineer in Charge. |
| 20 | M&L for preparation new plastered surface, concrete surface of wall, and applying two coats of all weather exterior emulsion paints in camouflaging pattern @1.43 litre/10 sqm over and including priming coats of exterior primer of same make applied @ 0.9 litre/10 sqm as per new sigma pattern generated by station authority and RGB value variation from 110 to 171 by using 4 to 5 colour shades as per approved pattern at a height n.exc 25 mtr as per sample approved by GE, including 3mm thick wall care putty of exterior grade, complete all as specified and directed by Engineer in Charge.Note:- the % of the colour may change without any financial effect. |
| 21 | M&L for complete removal of existing treatment and preparation of old decorative surface, concrete surface of wall, roof and applying two coats of all weather exterior emulsion paints in camouflaging pattern @1.43 litre/10 sqm over and including priming coats of exterior primer of same make applied @0.9 litre/10 sqm as per new sigma pattern generated by station authority and RGB value variation from 110 to 171 by using 4 to 5 colour shades as per approved pattern at a height n.exc 25 mtr as per sample approved by GE, including 3mm thick wall care putty of exterior grade, complete all as specified and directed by Engineer in Charge.Note:- the % of the colour may change without any financial effect. |
| 22 | M&L for preparing new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of chalk whiting primer over and including 3mm thick wall care putty, complete all as specified and directed by Engineer in Charge. |
| 23 | M&L for Complete removal of existing treatment on wall and applying two coats of oil emulsiondistemperover one coat of chalk whiting primer over and including 3mm thick wall care putty, complete all as specified and directed by Engineer in Charge. |
| 24 | M&L for preparation of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling, complete all as specified and directed by Engineer in Charge. |
| 25 | M&L for providing and injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron, complete all as specified and directed by Engineer in Charge. |
| 26 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) n\"exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work, complete all as specified and directed by Engineer in Charge. |
| 27 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work, complete all as specified and directed by Engineer in Charge. |
| 28 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size45 x 70mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length completeincluding PCC Type B1 1:2:4 (using 20 mm graded granite stone aggregate) for repair of hold fasts and similar works as per specified drawings, complete all as specified and directed by Engineer in Charge.Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 29 | S&F of Factory made solid PVC Moulded Door shutter with particle board core,28 to 30mm thick (stiles), with 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing, complete all as specified and directed by Engineer in Charge. |
| 30 | S&F of Butt hinges100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed by Engineer in Charge. |
| 31 | S&F of Aluminium, anodised, barrel tower bolts 150mm long of extruded section, complete all as specified and directed by Engineer in Charge. |
| 32 | S&F of Aluminium handles 150mm size, cast type, anodised, complete all as specified and directed by Engineer in Charge. |
| 33 | S&F of Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section S&F bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer in Charge. |
| 34 | Providing and fixing factory made uPVC white colour casement (Operable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Windowprofile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (Onevertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, includingdrilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 + -0.2mm thick galvanized steelFrame (28mm x 21.5mm), sash (31mm x 27mm), Tprofile (27mm x 17mm) to be inserted in requiredprofile, frame will be fixed to the wall wilh 8mm x100mm long fasteners. Hardware: [casement doorhandle made of zinc alloyed (white powder coated).Corner striker. Secondary Strikers. Cylinder. Doortransmission gear made of mild steel with multi pointlocking system with strikes. 3D Hinges of zinc alloyed including door cill (white powder coated) [and 8mm to 10mm thick glazing withselected quality glass (Note: The unit rate quoted by contractor excludescost of glass and includes all other connectedaccessories. Net opening will be measured forpayment purpose), complete all as specified and directed by Engineer in Charge. |
| 35 | S&F of Solar control film 25 micron reflectivetype(garewaresun control orequivalent), complete all as specified and directed by Engineer in Charge. |
| 36 | S&F of 10mm thick Toughened glass as in hingeddoors, partitions automatic doorsand similar work includingcutting to shape, drilling holesrequired, complete all as specified and directed by Engineer in Charge. |
| 37 | S&F in repairs aluminium powder coated window/door grills , mesh size 50mm x50mm thickness 3.8mm fixing with aluminium beading, complete all as specified and directed by Engineer in Charge. |
| 38 | S&F of powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including Aluminium beading, rubber bead, Tension rods joining cleat for fixing etc, complete all as specified and directed by Engineer in Charge. |
| 39 | S&F of powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) with powder coating of any colour (thickness of powder coating not less than 50 micron), complete all as specified and directed by Engineer in Charge. |
| 40 | S&F of 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ aluminium shutter (supplied along with shutter)exc 0.50 sqm each, complete all as specified and directed by Engineer in Charge. |
| 41 | S&F of door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body), complete all as specified and directed by Engineer in Charge. |
| 42 | S&F of Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, complete all as specified and directed by Engineer in Charge. |
| 43 | Dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premises, complete all as specified and directed by Engineer in Charge.Note:- All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. |
| 44 | M&L for Non Skid ceramic coloured tiles of7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc laid over and including 15mm thick screed bed or bedding layer of CM (1:4), set & jointed in neat cement slurry & pointed in white or coloured cement to match, complete all as specified and directed by Engineer in Charge. |
| 45 | M&L for Vitrified Ceramic colour tiles light shade 10 mm thick (square/ rectangular) double charged/ultra chargedpolished, area ofeach tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tomatch over including screed bed or bedding layer of mortar (1:4) 15 mm thick, complete all as specified and directed by Engineer in Charge. |
| 46 | M&L forVitrified Ceramic colour tiles in vertical surface light shade 10 mm thick (square/ rectangular) double charged/ultra chargedpolished, area ofeach tiles not exceeding 0.36 sqm as in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10 mm thick CM 1:4, complete all as specified and directed by Engineer in Charge. |
| 47 | M&L for DesignerGlazed coloured ceramic tiles in vertical surface (dado/skirting) 7mm thick of size 450x300mm set and jointed in neat cement slurry and pointed in colour cement to match includingrendering 10 mm thick CM 1:4, complete all as specified and directed by Engineer in Charge. |
| 48 | Demolition of Wallandceilingboards(fibre, pulp, insulation, etc.) orinsulation boards/slabs/ blankets, any thickness, includingcover fillet, complete all as specified and directed by Engineer in Charge. |
| 49 | M&Lforsuspended false ceiling system using Chicago metallic (E grid) exposed suspended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre-primed, self embossed . textured designer board, water resistant termite resistant, fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 3- 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt-0.007 Kg/clip) hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture, complete all as specified and directed by Engineer in Charge. |
| 50 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed by Engineer in Charge. |
| 51 | M&L for Granite stone slab (of any type) 18 to 20mm thick machine cut, work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and table top for fixing wash basin and flooringbedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types light shade over 20mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer in Charge. |
| 52 | M&L for 400mmx400mm of size and 20-22mm thick coloured chequered cement concrete tilesjointed with grey cement and pigment laid in floor over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engineer in Charge. |
| 53 | M&L for machine pressed precast concrete coloured interlocking paver blockwith grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid over and including 25mm thick sand cushion, complete all as specified and directed by Engineer in Charge. |
| 54 | Demolition of cement concrete (un-reinforced) in ground floor and paving thickness not exc. 15cm (below or above ground level), complete all as specified and directed by Engineer in Charge. |
| 55 | M&L for 75 mm thick Plain Cement Concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protectionfinishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed by Engineer in Charge. |
| 56 | M&L for 100 mm thick Cement concrete 1:4:8, type D-2(using 40mm graded stone aggregate) as in sub base to flooring, complete all as specified and directed by Engineer in Charge. |
| 57 | M&L for Plain Cement Concrete 1:2:4,type B0 (using 12.50mm graded stone aggregate) as in bands, coping, bed plate etc including weathering slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surfaces even and smooth using extra cement, complete all as specified and directed by Engineer in Charge. |
| 58 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil, complete all as specified and directed by Engineer in Charge. |
| 59 | M&L for 100 mm thick hard-core of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by Engineer in Charge. |
| 60 | Taking down old PVC wall panelling including fillets and mouldings and similar works of any description, complete all as specified and directed by Engineer in Charge. |
| 61 | S&F ofSolid PVC wall lining consisting of 5 mm thick plain coloured PVC sheet inclusive of Top beading, solvent cement and fixing at site on PVC frame as per specifications and drawing shown in SSR Part-I, complete all as specified and directed by Engineer in Charge. |
| 62 | S&F of5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing shown in SSR Part-I, complete all as specified and directed by Engineer in Charge. |
| 63 | S&F of500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each), fittings including dismantling of old water tanks and removal from site, complete all as specified and directed by Engineer in Charge. |
| 64 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.all as specified and asdirected. Note:- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approachingfor repair work, complete all as specified and directed by Engineer in Charge. |
| 65 | S&F of 18mm thick PVC ply of plain colour fixed with screws, solvent cement/ adhesive to make cabinet and bottom and shelves inside the cabinets, complete all as specified and directed by Engineer in Charge. |
| 66 | S&F of 18mm thick PVC ply of one side prelam/ rigidlam and other side balancing laminate colour to make kitchen cabinetshutter/drawer front shutters, complete all as specified and directed by Engineer in Charge. |
| 67 | S&F of5mm thick PVC ply of plain white colour fixed with screws,solvent cement / adhesive to make kitchen cabinet back covering and pull out drawer base, complete all as specified and directed by Engineer in Charge. |
| 68 | S&F of 20mm wide & 1mm thick PVC edge bedding of PVC pested on edges with suitable adhesive, complete all as specified and directed by Engineer in Charge. |
| 69 | S&F of ball bearing runners 45mm telescopic channel (20 inch) full extension load capacity 50 kgs, complete all as specified and directed by Engineer in Charge. |
| 70 | S&F of stainless steel handles 100mm size for kitchen cabinet shutters, complete all as specified and directed by Engineer in Charge. |
| 71 | S&F of continuous piano hinges stainless steel, bright finish width of flaps when open 30mm, complete all as specified and directed by Engineer in Charge. |
| 72 | S&F of 150mm hasp and staple safety type aluminium powder coated with mild steel pin including bolt to hinge plate and fix with screws, complete all as specified and directed by Engineer in Charge. |
| 73 | S&F of Magnetic catcher for cupboards, complete all as specified and directed by Engineer in Charge. |
| 74 | S&F of stainless steel curtain rod, decorative type, complete all as specified and directed by Engineer in Charge. |
| 75 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors, ladders,framed balusters, walk ways, railings, framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer in Charge. |
| 76 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide paint exposed to view surfaces, complete all as specified and directed by Engineer in Charge. |
| 77 | S&F of Pre-painted galvalume aluminium zinc coating GI based semi-circular type corrugated steel sheet 0.50mm thick of olive green colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws, complete all as specified and directed by Engineer in Charge. |
| 78 | M&L for 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors including taking down for cleaning and removal to store etc, complete all as specified and directed by Engineer in Charge. |
| 79 | M&L for 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc, complete all as specified and directed by Engineer in Charge. |
| 80 | S&F of Vitreous Ware wash down water closet (Pedestal), white (EWC) and fixed in repairs excluding flush pipe and flushing cisternincluding concrete complete including making good to floor, complete all as specified and directed by Engineer in Charge. |
| 81 | S&F in repairs plastic water closet seat cover white close pattern with flat bottom and cover, complete all as specified and directed by Engineer in Charge. |
| 82 | S&F in repairhealth faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer in Charge. |
| 83 | S&F in repair 10 Liters capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, complete all as specified and directed by Engineer in Charge. |
| 84 | S&F in repairs vitreous china WHB white flat back size 550 x 400 mm including brackets, waste pipe, 32 mm dia waste fittings brass CP for WHBwith long shank screwed and fly nuts , flags and bedded in red lead cement and outer end fixed, complete all as specified and directed by Engineer in Charge. |
| 85 | S&F of Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe), complete all as specified and directed by Engineer in Charge. |
| 86 | S&F in repairs 15mm dia Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe, complete all as specified and directed by Engineer in Charge. |
| 87 | S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup (concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer in Charge. |
| 88 | S&F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engineer in Charge. |
| 89 | S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer in Charge. |
| 90 | S&F of PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer in Charge. |
| 91 | S&F of Aluminium anodisedTubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engineer in Charge. |
| 92 | S&F of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long, complete all as specified and directed by Engineer in Charge. |
| 93 | S&F of fancy type looking mirror of size 600mmx450mm selected quality 5.5 mm thick glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and directed by Engineer in Charge. |
| 94 | S&F of Urinal spreader of PTMT any colour forfixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed by Engineer in Charge. |
| 95 | S&F of sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer in Charge. |
| 96 | M&L of 1.00 mm thick Mild steel, plain sheet in wall/vertical surface cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed by Engineer in Charge. |
| 97 | 34W/CAP-01/2025-26 : ADDN/ ALTN TO ORP BLDG (INTERNAL ELECTRIFICATIONE/M PORTION) |
| 98 | Taking down carefully copper/ aluminium point wiring(Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials to store for keeping in for taking credit and making good the disturbed surfaces/ walls/ floors etc, complete all as specified and directed by Engineer in Charge. |
| 99 | M&L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet top cover complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for the following item No 2.03 to 2.05 :- |
| 100 | One light/ fan point controlled by one,one way switch. |
| 101 | One socket outlet point 6 A on independentboard. |
| 102 | One socket outlet point 6 A on sameboard. |
| 103 | M&L for Concealed Point wiring with 4.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit ofadequate size with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet top cover complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one 16 Amp socket outlet on independent board, complete all as specified and directed by Engineer in Charge. |
| 104 | Taking down carefully copper/ aluminium Sub main point wiringcomplete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials to store for keeping in for taking creditand making good the disturbed surfaces/ walls/ floors etc, complete all as specified and directed by Engineer in Charge. |
| 105 | M&L for Concealed Submain Wiring with two run of 6.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and incl PVC conduit of adequate size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly, complete all as specified and directed by Engineer in Charge. |
| 106 | M&L for Concealed rigid non-metallic PVC conduit of external dia 25 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for drawing of telephone cable by users, complete all as specified and directed by Engineer in Charge. |
| 107 | M&L for Junction box (1 to 4 way) suitable for PVC conduit 25 mm external dia, complete all as specified and directed by Engineer in Charge. |
| 108 | S&F of modularSwitch piano type one way 6 Amps. |
| 109 | S&F of modular Socket outlet 2 in 1,3 pin, 6A flush type. |
| 110 | S&F of Switch socket combination outlet 5 pin 6 Amp flush type. |
| 111 | S&F of modular Switch socket Combination outlet 16A, 6 pin, 3 module flush type. |
| 112 | S&F of Ceiling rose surface bakelite three terminals. |
| 113 | S&F of Single pole and neutral Sheet metal enclosure with a two pin and earth plug socket complete with one double pole MCB 16 to 20 Amp, 240 Volts, complete all as specified and directed by Engineer in Charge. |
| 114 | S&F of epoxy powder coated MCB distribution box double door TPN 4 way horizontal type for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified and directed by Engineer in Charge. |
| 115 | S&F of epoxy powder coated MCB distribution box double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified and directed by Engineer in Charge. |
| 116 | S&F of MCB rupturing capacity 10 kA, \"C\" curve of the following rating for item No 2.20 to 2.23 |
| 117 | Single Pole 6 to 32 Amp |
| 118 | Double Pole 6 to 32 Amp |
| 119 | Four Pole 16 to 32 Amp |
| 120 | Four Pole 40 to 100 Amp |
| 121 | S&F of Exhaust fan 300 mm sweep AC single phase 230V with self closing louvers including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductorfrom ceiling rose to Exhaust fan, complete all as specified and directed by Engineer in Charge. |
| 122 | S&F of ceiling fan 1200 mm sweep 230V with double ball bearing and BEE five star rated complete with necessary connection up including provion of cable from ceiling rose to ceiling fan, complete all as specified and directed by Engineer in Charge. |
| 123 | S&F of modular fan regulator electronic step type 2 module suitable for 1200 mm sweep ceiling fan, complete all as specified and directed by Engineer in Charge. |
| 124 | S&F of lamp holder PVC/ Polycarbonate type with back plate suitable for batten fitting including One No 18 Watt LED Bulb, complete all as specified and directed by Engineer in Charge. |
| 125 | S&F of LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and as directed. |
| 126 | S&F in repair of pyramid top bollard- roundsquare aluminium housing LED 15 W with glare free mushroom shaped milky diffuser ( Bulb 100Lm/W) with IP65 with foundation of size (30cmx15cmx15cm) and wiring/connected items, complete all as specified and directed by Engineer in Charge. |
| 127 | S&F of LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed by Engineer in Charge. |
| 128 | Taking down carefully of Earthing complete, including fixture and fittings removing materials to store for keeping in for taking credit and making good the disturbed surfaces/ walls/ floors etc, complete all as specified and directed by Engineer in Charge. |
| 129 | M&L for Earthing complete with galvanised steel earth plate electrode 600 mmx600 mmx6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters deep below normal ground level and filled with alternate layers of charcoal and salt with 15 cm thick layer, connected to galvanised wire earth lead 4mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron, 20 mm bore GI pipe (med grade) for watering, 15 mm bore GI pipe (light grade) for protection of earth lead, including necessary earth work in any type of soil, Earth pit of PCC (1:3:6) type C1 and precast earth pit cover made of RCC (1:11/2:3) type A1 duly reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab complete all as specified and as shown in Electrical Plate No 3 of SSR Part-I including testing on completion. |
| 130 | M&L for Earth continuity conductor fixed to wall on & including porcelain insulator or drawn in conduit/ pipe or any other indicated situation for loop earthing etc as required with 4mm dia galvanised iron or steel wire complete all as specified and as directed. |
| 131 | 34W/CAP-01/2025-26 : ADDN/ ALTN TO ORP BLDG (HOT WATER SUPPLY E/M PORTION) |
| 132 | S&F of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc, complete all as specified and directed by Engineer in Charge. |
| 133 | S&F of Stop valves cast copper alloy screwed down high pressure with cruch or butterfly handle screwed both ends for iron pipe of size 15 mm dia bore, complete all as specified and directed by Engineer in Charge. |
| 134 | S&F of Bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe of 15 mm dia bore, complete all as specified and directed by Engineer in Charge. |
| 135 | S&F of 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for Hot & Cold water supply all PP-R plain and brass threded polypropylene random fittings concealed/ laid to walls, ceiling or in floor etc of size 16 mm outer dia, complete all as specified and directed by Engineer in Charge. |
| 136 | M&L for Cutting existing GI pipe of size 15/20/25 mm dia for tapping with 25/32 mm bore GI/PPR pipe including insertion of Tee 15/20/25 mm and jointing, complete all as specified and directed by Engineer in Charge. |
| 137 | M&L for Concealed Point wiring with 4.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit ofadequate size with all fittings and accessories including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one Industrial socket outlet (upto 20 Amp) independent, complete all as specified and directed by Engineer in Charge. Note: Industrial socket shall be measured & paid under separate item. |
| 138 | S&F of20 Amps Socket with Mini MCB Modular Box for AC, Heater, Power Machine 1 Socket Extension Boards (White, 0 m) with top, complete all as specified and directed by Engineer in Charge. |
| 139 | 34W/CAP-01/2025-26 : ADDN/ ALTN TO ORP BLDG (AIR CONDITIONING E/M PORTION) (NIT: 1.582 L) |
| 140 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity of 1.5 TR all accessories, complete all as specified and directed by Engineer in Charge. |
| 141 | M&L for Concealed Point wiring with 4.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit ofadequate size with all fittings and accessories including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one Industrial socket outlet (upto 20 Amp) independent board. For AC Points, complete all as specified and directed by Engineer in Charge.Note: Industrial socket shall be measured & paid under separate item. |
| 142 | S&F of metallic AC earth plug and socket withSheet metal enclosure with MCB SP 20A to 32A, complete all as specified and directed by Engineer in Charge. |
| 143 | S&F of amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) SPN 32Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning in existing MCB DB, complete all as specified and directed by Engineer in Charge. |
| 144 | S&F of Voltage stabilizer for automatic operation, copper wound, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA, with low and high voltage cut-off protection, protect equipment from potentially danger voltage, inbuilt in thermal temp burnout with latest IC technology and assories, complete all as specified and directed by Engineer in Charge. |
| 145 | 34W/MW/04/2025-26 : CONSTRUCTION OF A WASHROOM FOR CREW REST ROOM(BUILDINGWORKB/RPORTION) |
| 146 | Surface dressing n exc 15 cm deep and getting out in any type of soil, complete all as specified and directed by Engineer in Charge. |
| 147 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed by Engineer in Charge. |
| 148 | Excavating over areas, n exc 1.5 m deep and getting out in any type of soil, complete all as specified and directed by Engineer in Charge. |
| 149 | Excavating over areas, depth exc. 1.5m and not exc 3m deep and getting out in any type of soil, complete all as specified and directed by Engineer in Charge. |
| 150 | M&L for Plain Cement Concrete 1:4:8, Type D2(using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed by Engineer in Charge. |
| 151 | M&L for Formwork to sides flat rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter, complete all as specified and directed by Engineer in Charge. |
| 152 | M&L for Formwork to sides of rough finished surface of square concretecolumns, complete all as specified and directed by Engineer in Charge. |
| 153 | M&L for Formwork to sides and soffits of rough finished surfaceof floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed by Engineer in Charge. |
| 154 | M&L for Reinforcement Cement Concrete 1:2:4, (nominal mix) type B1 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and directed by Engineer in Charge. |
| 155 | M&L for Reinforcement Cement Concrete 1:2:4 (nominal mix) type B1, (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts, complete all as specified and directed by Engineer in Charge. |
| 156 | M&L for Reinforcement Cement Concrete 1:2:4 (nominal mix) type B1 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels, complete all as specified and directed by Engineer in Charge. |
| 157 | M&L for Precast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in cover slab for man hole, septic tank, sump etc. set in CM 1:4, complete all as specified and directed by Engineer in Charge. |
| 158 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer in Charge. |
| 159 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed by Engineer in Charge. |
| 160 | M&L for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks), complete all as specified and directed by Engineer in Charge. |
| 161 | M&L for Brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls in CM 1:4, complete all as specified and directed by Engineer in Charge. |
| 162 | M&L for 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete wall surfaces and finishing the surface even and smooth (without using extra cement), complete all as specified and directed by Engineer in Charge. |
| 163 | M&L for 15 mm thick, cement plaster in CM (1:6) on fair faces of brick or concrete on wall surfaces and finishing the surface even and smooth (without using extra cement) etc, complete all as specified and directed by Engineer in Charge. |
| 164 | M&L for applying Two or more coats coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall as per new sigma pattern generated by station authorityby using 4 to 5 colour shades as per approved pattern as per sample approved by GE, complete all as specified and directed by Engineer in Charge.Note: the % of the colour may change without any financial effect. |
| 165 | M&L for preparation of newly plastered surface of wall and apply three coats of white wash, complete all as specified and directed by Engineer in Charge. |
| 166 | M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:6, complete all as specified and directed by Engineer in Charge. |
| 167 | M&L for DesignerGlazed coloured ceramic tiles in vertical surface (dado/skirting) 7mm thick of size 450x300mm set and jointed in neat cement slurry and pointed in colour cement to match includingrendering 10mm thick CM 1:4 other than fair faces of brick or concrete on wall surfaces, complete all as specified and directed by Engineer in Charge. |
| 168 | M&L for Boring holes through glazed tile lining for pipes, etc n exc 50mm dia and making good, complete all as specified and directed by Engineer in Charge. |
| 169 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length completeincluding PCC Type B1 1:2:4 (using 20 mm graded granite stone aggregate) for repair of hold fasts and similar works as per specified drawings, complete all as specified and directed by Engineer in Charge. |
| 170 | S&F of Factory made solid PVC Moulded Door shutter with particle board core,28 to 30mm thick (stiles), wtih 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site, complete all as specified and directed by Engineer in Charge. |
| 171 | S&F of Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed by Engineer in Charge. |
| 172 | S&F of Aluminium, anodised, barrel tower bolts 150mm long of extruded section, complete all as specified and directed by Engineer in Charge. |
| 173 | S&F of Aluminium handles 150mm size, cast type, anodised, complete all as specified and directed by Engineer in Charge. |
| 174 | S&F of Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section S&F bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer in Charge. |
| 175 | S&F of powder coatedaluminium window and ventilator shutters, side hung type with out sash bars, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) with powder coating of any colour (thickness of powder coating not less than 50 micron), complete all as specified and directed by Engineer in Charge. |
| 176 | S&F of powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including Aluminium beading, rubber bead, Tension rods joining cleat for fixing etc, complete all as specified and directed by Engineer in Charge. |
| 177 | S&F of aluminium powder coated window/door grills , mesh size 50mm x50mm thickness 3.8mm, complete all as specified and directed by Engineer in Charge. |
| 178 | Supply only 4 mm thick sheet glass, ordinary quality, fixied to aluminium window or ventilators, in squares exceeding0.5 SqM in each pane, complete all as specified and directed by Engineer in Charge. |
| 179 | S&F of 15mm bore‘Mediumgrade’ tubes, galvanised, with all fitting and fixed to walls and ceilings or laid in floors concealed type or normally, complete all as specified and directed by Engineer in Charge. |
| 180 | S&F of 20mm bore‘Mediumgrade’ tubes, galvanised, with all fitting and fixed to walls and ceilings or laid in floors concealed type or normally, complete all as specified and directed by Engineer in Charge. |
| 181 | S&F of 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union, complete all as specified and directed by Engineer in Charge. |
| 182 | S&F of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore iron pipe and fixedin position, complete all as specified and directed by Engineer in Charge. |
| 183 | S&F of 150mm PVC (SWR) Pipes single socketed, in andy length with rubber ring joints laid in trenches or in floor, complete all as specified and directed by Engineer in Charge. |
| 184 | S&F of 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed by Engineer in Charge. |
| 185 | S&F of 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed by Engineer in Charge. |
| 186 | S&F of 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engineer in Charge. |
| 187 | S&F of PVC (SWR) 75 mm vent cowl, complete all as specified and directed by Engineer in Charge. |
| 188 | S&F of 110mm bore PVC (SWR) bends any radius, complete all as specified and directed by Engineer in Charge. |
| 189 | S&F of 110mm bore PVC (SWR) bends any radius with access door, complete all as specified and directed by Engineer in Charge. |
| 190 | S&F of 75mm bore PVC (SWR) bends any radius, complete all as specified and directed by Engineer in Charge. |
| 191 | S&F of 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed by Engineer in Charge. |
| 192 | Supply only 7 to 10 ltrs capacityPVC low level flushing cistern valve less, complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket, complete all as specified and directed by Engineer in Charge.Note : Rate for fixing low level flushing cistern deemed to be included with Ser Item No 5.48 |
| 193 | S&F of Vitreous China wash down water closet pan (Pedestal Pattern) white including P and S trap ,including white plastic seat cover with mild steel CP hinging device, 32mm bore PVC flush pipecomplete jointing, connecting and making good the disturbed surfaces, complete all as specified and directed by Engineer in Charge. |
| 194 | S&F of Wash basinvitreous china white flat back of size 550x400mm including pillar taps 15mm dia fancy type, cast copper alloy, with capstan heads, chromium plated, 32mm brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelain stopper, CI brackets, cutting for and pinning in ends of brackets or erectingstand, complete all as specified and directed by Engineer in Charge. |
| 195 | S&F of 15mm PVC connection 600mm long between ends with PTMT nut and washer, complete all as specified and directed by Engineer in Charge. |
| 196 | S&F of 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engineer in Charge. |
| 197 | S&F of 15 mm bore Stop valves,cast copper alloy chromium plated, fancy type, screwed down high pressure with screwed both ends for iron pipe or for unions, complete all as specified and directed by Engineer in Charge. |
| 198 | S&F of 15 mm bore Stop valves, fancy type chromium plated withlong shankand cup (concealed type), complete all as specified and directed by Engineer in Charge. |
| 199 | S&F of Vitreous china urinal partition white of size 310x700 mm, complete all as specified and directed by Engineer in Charge. |
| 200 | S&F of CP two way bib cock with all accessories, complete all as specified and directed by Engineer in Charge. |
| 201 | S&F ofCP shower rosewith or without swiveljoints 125 mm size including fixing to steel pipe or union 15 mm bore, complete all as specified and directed by Engineer in Charge. |
| 202 | S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer in Charge. |
| 203 | S&F of fancy type looking mirror of size 600mmx450mm selected quality 5.5 mm thick glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and directed by Engineer in Charge. |
| 204 | S&F of Stainless steel soap dish of approved make, complete all as specified and directed by Engineer in Charge. |
| 205 | S&F of Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm between flanges, complete all as specified and directed by Engineer in Charge. |
| 206 | S&F of Sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed by Engineer in Charge. |
| 207 | S&F of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed by Engineer in Charge. |
| 208 | S&F of Vitreous China Urinal, Half stall type, white including waste coupling and 32mm bore PVC waste pipe (excluding flushing cistern), complete all as specified and directed by Engineer in Charge. |
| 209 | S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws /J hooks, complete all as specified and directed by Engineer in Charge. |
| 210 | S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc, complete all as specified and directed by Engineer in Charge. |
| 211 | M&L for Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer in Charge. |
| 212 | M&Lforsuspended false ceiling system using chicago metallic (E grid) exposed suspended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed, self embossed. textured designer board, water resistant termite resistant, fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 3- 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt-0.007 Kg/clip) hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture, complete all as specified and directed by Engineer in Charge. |
| 213 | M&L for hardcore of gauge n. exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers n. Exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by Engineer in Charge. |
| 214 | M&L for 100 mm thick Cement concrete 1:4:8, type D-2(using 40 mm graded stone aggregate) in sub base of flooring, complete all as specified and directed by Engineer in Charge. |
| 215 | M&L for 25 mm thick Cement concrete 1:2:4 type B0, (using 12.5 mm graded stone aggregate) as under layer floor finishes, finish even & rough to receive floor finishes, complete all as specified and directed by Engineer in Charge. |
| 216 | M&L for 75 mm thick Plain Cement Concrete 1:3:6, type C-1 (using 20mm graded stone aggregate)as in plinth protection finished surface even and smooth without using extra cement, complete all as specified and directed by Engineer in Charge. |
| 217 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.of hard/dense soil, complete all as specified and directed by Engineer in Charge. |
| 218 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m, complete all as specified and directed by Engineer in Charge. |
| 219 | 34W/MW/04/2025-26 : CONSTRUCTION OF A WASHROOM FOR CREW REST ROOM (ELECTRIC WORK E/M PORTION) |
| 220 | M&L for point wiring light point/ bell point with single core PVC insulated FRLS unsheathed 1100 volt grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through in concealed conduit, fixed on wall, ceiling with GI saddles GI screws, rawal plugs (concealed conduit wiring) with all fittings including Tee, junction boxes and provision of modular metal flush boxof suitable sizemodular white cover plate with frame for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) complete all as specified for following item No 6.02 |
| 221 | One light/fan/bell point controlled by one switch 6 amp one way |
| 222 | S&F of BLDC exhaust fan 5 star rated, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers, complete all as specified and directed by Engineer in Charge. |
| 223 | S&F of ceilling rose 65 x 17 mm three terminals, complete all as specified and directed by Engineer in Charge. |
| 224 | S&F of switch piano flush type single pole, one way 6amp . |
| 225 | S&F of energy saving decorative box type batten light fitting 230 Volts surface mountedcomplete with high efficiency PMMA diffuser soft glare free light LED Tube light 20 watt, blue coloured end capswith all accessories, pre-wired,including providing flexible copper wire, three core cable PVC insulated sheathed, complete all as specified and directed by Engineer in Charge. |
| 226 | S&F of sheet metal enclosuresDBDouble door type 4 way SPN 240 voltincluding 200 Amps rated bus bar with neutral link, complete all as specified and directed by Engineer in Charge. |
| 227 | M&L for submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked25mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2.5 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper, complete all as specified and directed by Engineer in Charge.Note : Two runs of 4 sqmm cable alongwith one run of 2.5 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length. |
| 228 | S&F of MCB SP 5 to 32 Amps,240 volts curve \"C\",breaking capacity 10KA, complete all as specified and directed by Engineer in Charge. |
| 229 | S&F of MCB SPN32 Amps,240 volts,curve \"C\", breaking capacity 10 KA, complete all as specified and directed by Engineer in Charge. |
| 230 | NOTE: BOQ has bifurcated job wise, if bidder quoted different rate for same item at different jobs then lowest quoted rate shall be considered for acceptance for all jobs. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
