Tender For Repair/Maintenance Of Certain Otm And Md Accn Of 501 Fseg Under Ge Dehradun.; 1 Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 2 Material and labour for brick work with sub class B brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 3 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. 4 Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed. 5 Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth (without using extra cement) complete all as specified and directed. 6 Material and labour for 10 mm thick rendering on celing surface in cement mortar 1:3mixed surface finished even and smooth complete all as specified and directed. 7 Material and labour for preparation of newly plastered surface of walls including corners and applying two coats ofOBD over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. 8 Material and labour for preparation of newly plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing complete all as specified and directed. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac Perma No Damp + or equivalent. 9 Material and labour for preparation of newly plastered surface on ceilings and applying two coats of distemper oil emulsion on ceiling, off sets, pillar etc. over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. 10 Material and labour for preparation of old plastered surface of walls including corners and applying two coats of OBD complete all as specified and directed. 11 Material and labour for preparation of old plastered surface of walls including corners and applying one coat of OBD complete all as specified and directed. 12 Material and labour for preparation of old plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing including preparation of surfaces complete all as specified and directed. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac Perma No Damp + or equivalent. 13 Material and labour for preparation of old plastered surface of ceiling and applying one coat of OBD on ceiling, off sets, pillar etc. complete all as specified and directed. 14 Material and labour for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. 15 Material and labour preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed. 16 Material and labour for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. 17 Material and labour applying one coat of synthetic enamel paint on old painted steel surfaces/concrete surfaceof any description including preparation of steel surfaces complete all as specified and directed. 18 Material and labour for Vitrified Ceramic tiles light shade 7-8 mm thick (square/rectangular) polished area of each tiles not exceeding 0.72 sqm in floor etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry @ 3.0 Kg per sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified and directed. 19 Description all as per item No 18 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4 complete all as directed and specified. 20 Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.0 Kg per sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 21 Material and labour for non skid/mat finish ceramic coloured tiles of size 400 mm x 400 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry @ 3.0 Kg per sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 22 Description all as per item No 21 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. 23 Demolition of Cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and directed. 24 Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in flooring finishing the surfaces even & smooth without using extra cement complete all as specified and directed. 25 Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed. 26 Material and labour for coloured pre-polished rubber moulded chequred cement concrete coloured (red/yellow) tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry @ 3.0 Kg per sqm as in floor with grey cement and pigmentlaid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 27 Material and labour for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry @ 3.0 Kg per sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. 28 Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed. 29 Material and labour for Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed. 30 Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. 31 Dismantling of stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. 32 Material and labour for 12-15 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified anddirected. 33 Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed. 34 Description all as per ser Item No 33 above but n.exc 1.5 sqm each complete all as specified and directed. 35 Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each and removing from the site complete all as specified and directed. 36 Supply and fixing factory made 100 % solid wood plastic composite (WPC) door frame 100x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. 37 Supply and fixing factory made 100 % solid wood plastic composite (WPC) door frame 125x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. 38 Supply and fixing 30 mm thick WPC factory made 100% solid flush door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified and directed. 39 Supply and fixing 30 mm thick WPC factory made Glazed and skeleton shutter (conforming as per IS-4020) made from 100% lead free single extruded open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. 40 Supply and fixing for stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with nails complete all as specified and directed. 41 Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 42 Supply and fixing for stainless steel Butt Hinges medium weight 100 mm fixed to steel/wooden shutters with stainless steel screws complete all as specified and directed. 43 Supply and fixing for stainless steel barrel tower bolts 150 mm size fixed with stainless steel screws complete all as specified and directed. 44 Supply and fixing for 150 mm size solid in one piece stainless steel handles fixed with stainless steel screws complete all as specified and directed. 45 Supply and fixing for stainless steel sliding door bolts of length 250 mm size and fixed with stainless steel screws complete fixed in repair complete all as specified and directed. 46 Supply & fixing in repair 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet frontshutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. 47 Supply & fixing in repair 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet frontshutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. 48 Supply & fixing in repair 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, solvent cement/ adhesive complete all as per specifications & directed. 49 Supply and fixing magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. 50 Supply and fixing Continuous (PIANO) hinges, stainless steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified and directed. 51 Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed including hacking out old glass complete all as specified and directed. 52 Supply and fixing in repair cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 851 to 1000 mm wide complete all as specified and directed. 53 Supply & fixing in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed. 54 Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. 55 Supply and fixing for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 56 Supply and fixing for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. 57 Dismantling of timber scantlings 40 sq cm and over in section in any position in unframed work complete all as specified and directed. 58 Supply & fixing for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed. 59 Supply and fixing for Framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 60 Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat cover, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device complete all as specified and directed. 61 Supply and fixing in repair vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed. 62 Supply and fixing in repair 10 ltr capacity PVC low level flushing cistern valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed complete all as specified and directed. 63 Supply and fixing in repair vitreous china rimless single piece WC of size 385 x 720 x 710 mm with UF sift close slim seat cover, hinges, fixing accessories and dual flushing cistern complete all as specified and directed. 64 Supply and fixing in repair Vitreous China wash hand basinincluding brackets, white size 550 x 400 mm including cutting for and pinning in ends of brackets, including Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. 65 Supply and fixing in repair vitreous china wash hand basin with pedestal including brackets, white size 550 x 400 mm including cutting for and pinning in ends of brackets, including Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. 66 Supply and fixing in repair 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure complete all as specified and directed. 67 Supply and fixing in repair 15 mm dia angle cock/ angle valve/ stop valves chromium plated with capstain head screwed down high pressure complete all as specified and directed. 68 Supply and fixing in repair short body bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed. 69 Supply and fixingin repair CP health faucet suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 70 Supply and fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 71 Supply and fixing in repair wall mixer/L bend mixer 15 mm dia, Brass Chromium plated complete all as specified and directed. 72 Supply and fixing in repair centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified and directed. 73 Supply and fixing for medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. 74 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed. 75 Supply and fixing for medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. 76 Taking down CI/AC/PVC pipes incl fittings upto 110mm dia and removing from site complete all as specified and directed. 77 Supply and fixing PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls or laid in trenches or floors complete all as specified and directed. 78 Supply and fixing PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls or laid in trenches or floors complete all as specified and directed. 79 Supply and fixing PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed. 80 Supply and fixing PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed. 81 Supply & fixing in repair glass corner shelf suitable size made of 5 mm thick toughened glass with CP railing complete all as specified and directed. 82 Supply & fixing in repair front glass shelf assembly consisting of 5 mm thick toughened glass with CP railing and brass brackets complete all as specified and directed. 83 Supply and fixing for rotational moulded polyethylene 500 Ltrs Capacity white water storage tanks of weight not less than 18 kg (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 15 mm dia including dismantling of old tank complete all as specified and directed. 84 Supply and fixing for rotational moulded polyethylene 1000 Ltrs Capacity white water storage tanks of weight not less than 33 kg (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 15 mm dia including dismantling of old tank complete all as specified and directed. 85 Material and labour for 20-25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry @ 3.0 Kg per sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing rounding to exposed edges incl 20 mm thick screed bedding layer of CM 1:4 complete all as specified and directed. 86 All as per item No 84 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:3 complete all asspecified and directed. 87 Supply and fixing for hollow PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing including dismantling of old boarding complete all as specified and directed. 88 Material and labour for providing & fixing false ceiling ofDesigner tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main T at 600 mm c/c toform a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mmand laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width including dismantling of old boarding complete all as specified and directed. 89 Supply & fixing for powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed by Engr-in-charge.Size of Track-Both Top & Bottom (Verticles sides):- 100 x 44 x 1 mmSize of Shutter Frame:- 25 x 12 x 1 mmNote: Iron grill with frame to be fixed with window (measured and paid separately) 90 Supply & fixing for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed.Note: Iron grill with frame to be fixed with window (measured and paid separately) 91 Supply and fixing for Anodised aluminum powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having two Disc or D type handle, two aluminum tower bolt 200 mm size, one brass mortice lock of 6 lever with key and one hydraulic door closure, shutter to be partly glaze with 4mm thick tinted coloured glass in upper panel and partly pannelled with 12mm thick both side pre-laminated particle board in lower panel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed. Chowkhat Frame:- 100 x 44 x 1 mmShutter Vertical style:- 100 x 44 x 1 mmShutter Middle Rail:- 100 x 44 x 1 mm Shutter Top Rail and bottom Rail:- 150 x 44 x 1 mm 92 Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC surface/ concealed conduit as per existing or as directed at site with medium duty 20mm dia or higher size PVC conduit complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction boxof thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: NOTE:-(i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. 93 One light point,controlled by one way switch, complete all as specified and directed. 94 One fan point, controlled by one way switch through regulaor, complete all as specified and directed. 95 One bell point, controlled by bell push switch, complete all as specified and directed. 96 One three pin 5 Amp socket on same board with other switches, complete all as specified and directed. 97 One three pin 5 Amp socket on independent board, complete all as specified and directed. 98 Description allas per ItemNo 92.00 mentionedhere-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mmPVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed. 99 Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit any type or size complete including pressed iron/steel suction boxof thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for sunken boxes after taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: NOTE:- Point wiring & earth wire shall be connected to each & every flush/sunken box. 100 One light point,controlled by one way switch, complete all as specified and directed. 101 One fan point, controlled by one way switch through regulator, complete all as specified and directed. 102 One bell point, controlled by bell push switch, complete all as specified and directed. 103 One three pin 5 Amp socket on same board with other switches, complete all as specified and directed. 104 One three pin 5 Amp socket onindependent board, complete all as specified and directed. 105 Description allas per ItemNo 93.00 mentionedhere-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed. 106 Material and labourfor sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLSH copper conductor multistranded drawing in and including 20 mm dia or higher medium duty PVC surface/ concealed conduit/ flexible conduit as existing or as directed at site whereever required and conduit accessories and fittings including one single core green colour PVC insulated unsheathed FRLSH cable copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete including cutting chases for conduits etc after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE : - 3 run of cable and 1 run ofconduit shall be measured as 1 unit.(ii) The quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings. 107 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed. 108 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed. 109 Material and labourfor sub main wiringwith 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE : - 3 run of cable shall be measured as 1 unit. 110 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed. 111 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed. 112 Supply and fix switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed. 113 Supply and fix socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed. 114 Supply and fix switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed. 115 Supply and fix socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed. 116 Supply and fix bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed. 117 Supply and fix calling bell ding dong type AC 230 Volt single pole complete all as specified and directed. 118 Supply and fix stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size230 volts, 6 Amps 120 watts complete all as specified and directed. 119 Supply and fix Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed. 120 Supply and fix energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 121 Supply and fix energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 122 Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 123 Supply and fixing LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete all as specified and directed. 124 Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including taking down existing unserviceable and depositing to MES store yard complete all as specified and directed.Note:- DB and MCCB/MCB shall be of same make. 125 Supply and fix distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as incoming incl taking down existing unserviceable and depositing to MES store yard complete all as specified and directed.Note:- DB and MCCB/MCB shall be of same make. 126 Supply and fix MCB single pole and neutral 240 volt 10 KA 40 Amp C series conforming to ISI marked complete all as specified and directed. 127 Supply and fix MCB single pole and neutral 240 volt 10 KA 32 Amp C series conforming to ISI marked complete all as specified and directed. 128 Supply and fix MCB single pole 240 volt 10 KA 6- 32 Amp C series conforming to ISI marked complete all as specified and directed. 129 Supply and fix MCB TPN 415 volt 10 KA 63 Amp C series conforming to ISI marked complete all as specified and directed.. 130 Material and labour in replacement for earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised from 4 mm dia earth lead by means of bolts, nuts, check nuts and wathers of GI or steel all as shown in electrical plate No. 5 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item.(ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.(iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost. 131 Material and labour for laying, jointing and testing in replacement undergroundXLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area all as directed: Notes:(a)Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately.(b)Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses.(c)Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor. 132 10.0 Sqmm, 4 core, complete all as specified and directed. 133 16.0 Sqmm, 4 core, complete all as specified and directed. 134 Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etcand getting out complete all as specified and directed. 135 Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed. 136 Material & labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as specified and directed. 137 Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed. 138 Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. 139 Supply & Laying GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as specified and directed. 140 Attending internalElectric complaint in the blocks/lines/offices in the OTM Accn of 3/8 GR due to any reason like no supply ,any fualt/complaints rectifications with supply & replacement of the following electricstores as mentioned in item No 123.00to 127.00 here in after by trained person complete all as specified and directed. Notes :-(a) This item shall be measured and paid only when store requirement for attending and resolving the complaint is NIL(b) Incase, stores are required to attend and resolve the complaint, this item will not be measured and payment to the contractor shall be done under relevant items from 123 to 127.(c) All T&P and safety tools required to above job are included in the unit rate.(d) Unit rates also include the conveyance and communication faicility is requried the complete the job.(e) The complaint register,complaint slips for each area/zone ,materials issue register for each complaint slips will be maintain by the contractor or rep/supervisor and daily produced all documrnts to the JE/MCM / AGE E/M(f) Materials will provided by the contractor through this contract & neccessary unserviceable or replaced items/unuseditems deposited back to complaint cell. unserviceable/ replaced items will be credited in the Sch of credit items. 141 Supply and fixingin repairwall mounted LED tube light fitting 1x20 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed. 142 Supply and fixingin repairwall mounted LED tube light fitting 1x10 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed. 143 Supply and fixingin repair LED building securitylight fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete voltage surge protection of 4kv & with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old u/s fitting complete all as specified and directed. 144 Supply and fixing in repairfully diffused recessed mounted 2x2 LED luminaire 36 Watt 6500K in White & grey housing with profiled & flat diffuser acomplete all as specified and directed. 145 Supply and fixing in repaircapacitor 2.5 to 3.15 MFD as per existing capacity of 240 volts AC complete all as specified and directed. 146 NOTE:- Amount of credit ofRs. 63799.00for retrieved materials is mentioned in Schedule of Credit Page No 30 of tender documents in pdf form which will be deducted offline while acceptance of tender.
