Tender For Special Repair To Bldg No Eb-29 (Jco Md Accn) Under Ge (Mcte) Mhow.; 1 Dismantling of floor, hearth or wall tiling/ Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises etc complete all as specified and as directed 2 M&L for Non-skid Ceramic, Colorised tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. 3 M&L for Non-skid Ceramic, colorised tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/ Vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. 4 M&L for Non - skid Ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. 5 M&L for Glazed ceramic tiles coloured 300mm x 450mm , 6 to 7mm thick as in skirting/ dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and directed 6 M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. 7 M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/ skirting etc complete all as specified and directed 8 Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/ Partitions etc complete all as specified and directed 9 M&L for granite (of any type) stone slab 18-20mm thick (table rubbed and polished), in skirting, Kitchen platform/ dado etc laid over 20mm screed bed in C M 1:4 jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed. 10 Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc complete all as specified and directed 11 Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqmeach and removing from site complete etc complete all as specified and directed 12 S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed 13 S&F Factory Made Solid PVC Molded Door Shutters 30mm thick (stile, with 2, 4 or 6 raised panel design with 2mm thick Molded PVC Sheet on the front Face & 2mm Plan color PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed. 14 S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed. 15 S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed. 16 M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete for Fe 410 (grade E-250 quality -A) 17 M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and directed. 18 S&F Powder coated (thickness of powder coating not less than 50 micron) anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 19 S&F powder coated alumnium (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified as per architechtural drawings and directed. 20 S&F powder coated alumnium (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung typewithout sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified as per architechtural drawings and directed. 21 S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares in exc 0.5 sqm in each pane etcc omplete all as specified and directed 22 S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainles steel wire stapel etc complete all as secified and directed 23 S&F Aluminium anodised tower bolt 200mm long of extruded section etc complete all as specified and directed. 24 S&F Aluminium anodised towerbolt 150 mm long of extruded section etc complete all as specified and as directed. 25 S&F aluminium alloy, anodised sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and directed. 26 S&F butt hinges, 100mm heavy weight, cold rolede mild steel and fixed complete all as specified and directed. 27 S&F 150mm long aluminium handle, cast type, anodised etc complete all as specified and directed. 28 Dimantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. 29 S&F pre-painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min 0.50mm TCT confirmin to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 MPA yield stress as per AS-1397), as in roof covering/ cladding to wall fixed with self tapping screws colour/ exterior coat of silicon modified polyster/ BHP X RW paint system 20 microntop coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete all as specified and directed. 30 S&F pre-painted coloured plain sheet profiled Galvalume/ Zincalume sheet with min 0.50mm TCT confirmin to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 MPA yield stress as per AS-1397), as in roof covering/ cladding to wall fixed with self tapping screws colour/ exterior coat of silicon modified polyster/ BHP X RW paint system 20 microntop coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete all as specified and directed. 31 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/ slabs/ blankets, any thickness including cover fillets etc complete all as specified and directed. 32 M&L for anodised aluminium snap grid frame work for false ceiling including Hangers 4mm dia. G.I. (upto 1800mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. 33 M&L for 4mm thick Non asbestos fibre cement disigner pre-painted building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and directed. 34 Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed. 35 M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary welding, febrication Fe-410W (GdeE-250) quality A complete all as specified and directed. 36 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbishfrom the site etc complete all as specified and directed. 37 M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed. 38 M&L for rendering 20mm thick in two layers of 10mm thick and 10mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and directed.Note:- WPC shall be measured and paid seperately and mixed with polyster triangular fabric. 39 Supply only water proofing compound (Liquid) complete all as specified and directed. 40 Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15mm dia bore complete all as specified and directed. 41 All as per Srl item No.40 above but 20mm dia bore. 42 All as per Srl item No.40 above but 25mm dia bore. 43 Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. 44 S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 20mm dia bore pipe (including in short length) complete all as specified and directed. 45 All as per Srl item No.44 above but 25mm dia bore. 46 Dismantling water tanks exc 250 ltr but not exc 500 ltr and removing to store etc complete all as specified and directed. 47 S&F rotational moulded PVC water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part-I etc complete all as specified and directed 48 S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/ 25mm-455gms/ 40mm- 690 gms) etc complete all as specified and directed. 49 S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25mm bore and fixed as in repair complete all as specified and directed. 50 Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and directed. 51 M&L for brick work with fly ash Bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed. 52 M&L for Fly ash Brickwork straight or curved on plan exc 6m mean radius built in Cement morter 1:6 complete all as specified and directed. 53 S&F in repair white vitreous china wash basin white flat back size 550 x 400 (Oval shape) excluding taps but including 32mm dia chromium plated waste fitting and PVC waste pipe 610mm long andMS brackets complete all as specified and directed. 54 S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed. 55 S&F 0.5mm thick stainless steel plate rack of overall size 24 x 36 x 10 inch of standard quality and shapes complete all as specified and directed. 56 S&F in repair white vitreous china EWC with seat cover (pedestal pattern) complete all as specified and directed. 57 S&F as in repair Bevelled edge mirror of selected quality of size 600mm x 600mm mounted on 6mm thick AC building board of or 6mm thick with 40mm thick acrylic beading etc complete all as specified and directed. 58 S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed. 59 S&F in repair chromium plated shower roses 125mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed. 60 S&F in repair PVC valveless syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including 32mm flush pipe, brackets & connection to pipe etc complete all as specified and directed. 61 S&F PVC connection of 45 cm length including brass nuts complete all as specified and directed. 62 Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and directed. 63 M&L for 75mm thick pcc type C-2, 1:3:6 (using 40mm graded aggregrate) as in flooring, plinth protection Finishing cement concrete surface even and smooth Without using extra cement complete all as specified and directed. 64 M&L for 19/20mm thick Pre laminated interior grade both/one sides laminated for cup board etc complete including beading complete all as specified and directed. 65 S&F mild steel Helical door spring 300mm long ordinary rat tail type incl roaller & roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. 66 Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends and edges of landing, steps, cills, sunshade, shelves, lintel, etc and cutting chases for concealed water tubing or concealed conduit wiring etc, making good, cutting not exc 10cm girth complete all as specified and directed. 67 S&F decorative stainless steel curtain rod of wooden finish 20mm dia thickness not less than 0.75mm fixed with curtain rod holder fixed in walls wih screws and finials caps with 06 Nos of curtain ring per Rm complete all as specified and directed. Note:- Curtain rod holder and finials cps will be measured and paid seperately at supply only rates. 68 Supply only decorative stainless steel curtain holding bracket suitable for holding 20mm curtain rod heavy duty complete all as specified and directed. 69 Supply only decorative stainless steel finial end cap suitable for curtain rod of 20mm dia as approved complete all as specified and directed. 70 S&F health faucet with flexible pipe 15mm bore 1.5 m long complete all as specified and directed. 71 M&L for complete removal of existing treatment of wall andapplying 1mm wall care putty with priming chalk white and two coat of oil bond distemper white or any tint over a coat of primer etc complete all as specified and directed. 72 M&L for complete removing of existing treatment on wall applying 1mm wall care putty with priming chalk white and finishing finishing walls with acrylic smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm etc complete all as specified and directed. 73 M&L for preparing new plastered surface of ceiling surface and applying three coats of white wash etc complete all as specified and directed. 74 M&L for preparing old plastered surface of ceiling and applying one coat of white wash etc complete all as specified and directed. 75 M&L for preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed. 76 M&L for preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed 77 M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 78 Cleaning of vegatation of height upto 300mm from roof, slab, wall, chajja etc and digging out roots etc n exc and filling holesand finish the surfaces with cement morter (1:3) complete all as specified and directed. 79 Making good under cills over arches, lintel and bresummers, including all pinning when nessesary with using cement mortar 1:6 complete all as specified and directed. 80 Dismantling boarding of any description fixed in screws complete all as specified and directed.. 81 S&F continous (piano) hinges, mild steel, bright finish or eletro galvanised with of flap (when opne) 30mm etc complete all as specified and directed.
