Tender For Improvement Of Old Gas Godown Used As Store At Ftr Hq Bsf Jodhpur Rajasthan Sh Ei And Service Connection; 1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B. 2 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 3 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 5 Supplying and drawing 3 x 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 6 Wiring for circuit/ submain wiring alongwith earth wire with the sizes 4 X 4 sq. mm + 2 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 7 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. i. 25 mm. 8 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 9 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). 10 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 11 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 12 Supplying and fixing brass batten/ angle holder including connection etc. as required. 13 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. 14 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). i. 4 way (4 + 12), Double door. 15 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load ofSingle pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. 16 Supplying and fixing 100 Amp rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 17 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 18 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. 19 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 20 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 21 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. 22 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.i.) 3½ X 35 sq. mm (32mm). 23 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.ii.) 3½ X 50 sq. mm (35mm). 24 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.i) Upto 35 sq. mm. 25 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.ii)Above 35 sq. mm and upto 95 sq. mm. 26 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.i) Upto 35 sq. mm (clamped with 1mm thick saddle). 27 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.ii) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp). 28 Providing and fixing of 36 Watt, 2x2 feet, 100 lm/watt, Square recess mounted fitting LED lighting fixture with extruded polycarbonate directly on ceiling, including connections, testingcomplete etc. as required of model No.LCTLRNE-36-FO-CDL of Crompton make or equivalent specification Havells, Phillips, Osram, Bajaj makes. 29 Providing and fixing of 12 Watt, Round and Square recess mounted fitting LED lighting fixture with extruded polycarbonate directly on ceiling, including connections, testingcomplete etc. as required of model No.LSCSM-12W-CDL of Crompton make or equivalent specification Havells, Phillips, Osram, Bajaj makes. 30 Supply, Installation, Testing and Commissioning of mirror light, 10 watt, 6500K, LED ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient witj inbuil driver including connection etc as required, model No. LHEXACP7IN1W010 of Havells make or equivalent makes (Crompton, Phillips, Osram). 31 Providind and fixing of PVC Exhaust/ventilation fan 200 mm with Shutter louvers, fasteners includingincluding cuttinghole in the wall, connection, testing and commissioning etc as reqd. Model Ventil Air DX HS White(Havells make) or equivalent model & specification of Orient/Bajaj/Crompton/standard make 32 S/I/T/C of 20 Watt, 3000-6500 K LED batten Decorative ultra slim square profile LED lighting fixture with polycarbonate housing, environmental friendly, energy efficient with LED inbuilt driver Havells make (lumline nxt batten) or equivalent make of Philips/CG/Bajaj/Orient including connection etc as required. 33 Add GST difference Multification factor (0.0633) onElect DSR 2022 Items of Part-A (Srl No.1 to 27 ) 34 Add Correction Multification factor @ 0.973 on DSR Items of Rs. 319730.35)
