|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 4 | In cement mortar |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 6 | Of area beyond 3 sq. metres |
| 7 | Dismantling G.I. pipes mechanically or manually (external and internal ) including wall cutting , finishing the holes after replacement of new cpvc pipes with necessary civil works. Dismanteled GI pipes arestacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 8 | 15 mm to 40 mm nominal bore |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 11 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 13 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 14 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size. Note: Skirting will be considered in Sq Meter, Hence read the specification carefully and quote. |
| 15 | Size of Tile 600 x 600 mm |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 17 | PLASTERING INTERNAL SURFACES: Plastering 20mm thick with cement mortar specified below, finished smooth with lime neeru, including scaffolding, curing, etc; complete for INTERNAL SURFACES of stone masonry/brick masonry walls sills, jambs, etc; complete all as per specifications UPTO FLOOR LEVEL, mix specified is for cement: fine sand. NOTE: CM 1:3 OR 1:4 is generally applicable for ceilings and RCC surfaces unless otherwise specified. |
| 18 | with CM 1:4 |
| 19 | CEMENT PLASTER (IN COARSE SAND): 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) |
| 20 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Rate shall be quoted after reading the complete Specifications and understanding site conditions. |
| 21 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 22 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 23 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 24 | Two coats |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 26 | One or more coats on old work |
| 27 | Providing and fixing UPVC ( Unplastisized Poly-Vinyl Chloride ) sliding/casement/louvers windows multichambered and stiffened / reinforced framed windows using 112 mm x 52 mm size sectionsalround as main frames and shutters made with the profile sections of size 68 mm x 42 mm, including the cost and fixing of 5 mm thick clear float glass in shuttersand SS 304Mesh in mesh Shutters of Size 60 mm x 35 mm with neccessary beading, the corners of all the profiles of frames and shutters shall have well defined welded corner joints without any gaps, fixing the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to facilitate smooth operation. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials. Both the Frame and the Shutters shall be Reinforced with GI Profiles of thickness 1.25mm. |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 29 | W.C. pan with ISI marked black solid plastic seat and lid |
| 30 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 31 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 32 | Second class teak wood |
| 33 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including necessary fixtures like SS hinges, door closer, tower bolts, door stoper and nesessary polishing works etc., complete the work as per directions of Engineer In-charge. |
| 34 | 35 mm thick including ISI marked Stainless Steel butt hinges, handles, locks, with necessary screws etc, complete the work as per Engineer In-charge. |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases, necessary core cutting for kitchen and toilet/bath room lines and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 36 | 20 mm nominal dia Pipes |
| 37 | Providing and fixing CP two in one tap of approved quality : (Make: Jaguar) |
| 38 | 15 mm nominal bore. Two in one bib cock |
| 39 | Providing and fixing Health faucet. (Make: Jaguar) |
| 40 | Providing and fixing Nahanitrap with CP/SS gratings |
| 41 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to 1S:8931. |
| 42 | 15 mm nominal bore |
| 43 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 44 | 100 mm nominal size dia |
| 45 | Providing and fixing CP Brass wall mixerwith provision for overhead shower with 115mm long bend pipe on upper side connecting legs & wall flanges & the make as approved by Engineer in charge. Make: Jaguar Brand - Code- CON-CHR-273KNUPR |
| 46 | (a) 15 mm nominal dia |
| 47 | Providing and fixing C.P. brass shower arm (300mm length) with rose with 15 or 20 mm inlet : |
| 48 | 120 mm diameter rose |
| 49 | Providing and fixing of angle cock with necessary wall flang etc., complete the work. Make: Jaquar |
| 50 | Providing and fixing of long body bib cock with necessary wall flanges etc., complete the work. |
| 51 | Providing and fixing of wash basin waste pipe etc., complete the work. |
| 52 | Providing and fixing of wash basin waste coupling etc., complete the work. |
| 53 | Providing and fixing of connection pipe etc., complete the work. Make: Viking. |
| 54 | Providing and fixing of SS grating with hole etc., complete the work. Make: Viking. |
| 55 | Providing and fixing of SS grating with out hole etc., complete the work. Make: Viking. |
| 56 | Providing and fixing of 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 57 | granite stone slab of colour black, Cherry/Ruby red |
| 58 | Area of slab over 0.50 sqm |
| 59 | Groove cutting for wall for electrical wiring with necessary cement plastering works etc., complete the work. |
| 60 | Removing old GI electrical switch boxs with necessary cement works as per site condition etc., complete the work. |
