Tender For Special Repair Of Md Accommodation Bldg No P108 Circular Road Danapur Under Ge Danapur Cantt.; 1 Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level)complete all as specified and directed. 2 Dismantling of floor, walls or roof tiles including cement mortar bedding but not backing and rubbish off permises to outside MoD land complete all as specified and directed. 3 Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas etc complete all as specified and directed. 4 M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc over and including 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white cement mixed with pigments to match the shade of tiles complete all as specified and directed. 5 M&L for non skid ceramic colouredtiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 Sqm, on vertical surfaces such as skirtings, dados etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. 6 M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc over and including 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white orcement mixed with pigments to match the shade of tiles complete all as specified and directed. 7 M&L 25 mm thick plain cement concrete 1:2:4, type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed. 8 M&L for glazed ceramics coloured tiles of size 450x300x7mm thick on vertical surfaces such as skirting/dados/wall, etc over and including 10mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. 9 Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. 10 M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 11 M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed. 12 M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggreagate) as in fdn, sub base, mass concrete& cinder concrete etccomplete all as specified and directed. 13 M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protectionfinishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed. 14 M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and directed. 15 M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings,chajjas, shelves and similar articles with plain facesetc.with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete all as specified and directed. 16 Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. 17 M&L15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. 18 M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturers instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed.Note:Liquid WPC will be measured and paid separately. 19 M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed. 20 Supply only water proofing compound (liquid), ISI marked. 21 Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. 22 All as above item No 21 but exc 1.5 Sqm and n.exc. 4 Sqm each. 23 Taking down shutter of any description exc 1 sq. m and n exc 2 Sq m each and removing to store. 24 S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors complete all as specified and directed. 25 S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. 26 S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded complete all as specified and directed. 27 S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, without glazing bars, dovetailed or welded complete all as specified and directed. 28 S&F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed. 29 S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters,walk ways, railings, framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. 30 S & F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. 31 S & Fpressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. 32 M & L for plain cementconcrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar workd including necessary form work as required complete all as specified and directed. 33 S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specified and directed. 34 S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. 35 S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. 36 S&F aluminum alloy anodised sliding door bolts 300 mm long with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section complete all as specified and directed. 37 S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. 38 S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 39 S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 40 S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. 41 S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. 42 S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn spring, fixed in floor complete all as specified and directed. 43 S&F small fitings of 2nd class hard wood door, window stops and the likenot exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50 mm long complete all as specified and directed. 44 S&FGI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. 45 S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. 46 Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed. 47 S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane. 48 S & F 3 mm thick figured glass pin head type and glazing with oil putty in squaresn exc 0.5 Sqm in each pane etc complete. 49 S&F in repair 18/19 mm thick Block baords, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutterincl shlves complete all as specified and directed. 50 S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. 51 S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 25 mm dia of any colour as approved complete all as specified and directed. 52 S&F mild steel Bracket with PVC coating fancy type for curtain rod 25 mm dia of any colour as approved complete all as specified and directed. 53 Taking up or down 15 mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. 54 Taking up or down 20 mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. 55 Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.Note :-(i) CPVC fittings with brass threading will be measured and paid in separateitems (ii) Cost of normal SDR CPVC fittings Like Bend, Tee, Elbow, UNIon etc shall be inclusive under the quoted against this item. 56 Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.Note :-(i) CPVC fittings with brass threading will be measured and paid in separateitems (ii) Cost of normal SDR CPVC fittings Like Bend, Tee, Elbow, UNIon etc shall inclusive under the quoted rate against this item. 57 S&FCPVC 20mm Outer dia Brass elbow complete all as specified and directed. 58 S&FCPVC 20 mm Outer dia Brass Elbow (3/4 x 1/2) complete all as specified and directed. 59 S&F CPVC 20 mm Outer dia Brass Tee complete all as specified and directed. 60 S&F CPVC 20 mm Outer dia male Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete all as specified and directed. 61 S&F CPVC 20 mm Outer dia female Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete all as specified and directed. 62 S&F CPVC 20 mm Outer dia Brass Tank Adoptor complete all as specified. 63 S&F CPVC 25 mm Outer dia Brass Tank Adoptor complete all as specified. 64 S&FCPVC 20 mm Outer dia Brass Union complete all as specified. 65 S&F CPVC 25 mm Outer dia Brass Union complete all as specified. 66 S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets pinted with two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and directed. 67 S&F in repair vitreous china squating pan Orissa pattern WC size 580x440 mm white with integral foot rest and trap andincluding connection to trap, and to flushing pipe, anti-syphonage pipe, etc including making good to floor complete all as specified and directed. 68 S&Fin repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed. 69 S&Fin repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed. 70 S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. 71 S&Fin repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 72 S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed. 73 S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. 74 S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed. 75 S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. 76 S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed. 77 S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. 78 S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed. 79 S&F PVC (SWR) P trap for 110 mm dia complete all as specified and directed. 80 M&L for RCC as in kitchen platform, shelves & chajjas etc 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed. 81 M&L for 18 to 20 mm thick granite slab (of any type) work(table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 82 S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed. 83 Taking down AC/PVCpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mmdia pipe complete all as specified and directed. 84 S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors/trenches complete all as specified and directed. 85 S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. 86 S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed. 87 S&F PVC (SWR) pipes 50mm bore single socketed in any length with rubber ring joints laid in floor/, trenches complete all as specified and directed. 88 S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. 89 M/L PVC(SWR) bend of110mm dia of any radius etc complete all as specified and directed. 90 S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed. 91 M/L PVC(SWR) Tee of110mm dia etc complete all as specified and directed. 92 S&F PVC (SWR) bends any radiusprovided with access door of 75 mm dia complete all as specified and directed. 93 S&F PVC (SWR) branch pieces, single (equal or un equal) ordinary or inverted (spigot or socket type) or with pareralled branches of 110 mm dia with access door complete all as specified and directed. 94 The same as item No 93 bove but 75 mm bore. 95 S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. 96 S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia complete all as specified and directed. 97 S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia complete all as specified and directed. 98 Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs complete all as specified and directed. 99 S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoistedand fixed in position all as specified in SSR Pt-Iof 500 Ltr capacity complete all as specified and directed. 100 S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight20mm-210gms) complete all as specified and directed. 101 S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete all as specified and directed. 102 M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. 103 M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. 104 Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as specified and directed. 105 M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 106 M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 107 M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. 108 M & L for preparation of newly plastered surfaces ofwall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed. 109 M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. 110 M&L for preparing andapplying two coats of white wash on Old ceilingsurfaces complete all as specified and directed. 111 M&L for preparing and applying threecoats of white wash on new ceilingsurfacescomplete all as specified and directed. 112 M&L preparation of new plastered or unplasteredsurfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. 113 M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified and directed. 114 M&L for two coats of weather coat paint (apex) over a coat of primer on new surfaces of wall including preparation of newly/Oldplastered surfaces complete all as specified and directed. 115 Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 116 M&l Preparing surface of sunken slab and applying 15 mm thick cement plaster in 1:4 cement sand mortar mixed with integral water proofing compound both on floor and wall.The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified. Note:WPC will be measured and paid separately. 117 M&L PCC 1:3:6 type C2,(using 40 mm graded stone aggregate) as in sunken slab filling complete all as specified and directed. 118 M&L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc, and surface painting with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm, and lightly tampered (area of flashings, etc, shall be added to the roof areaPrepared to receivewater proofing treatment, incl filing of cracks, groves etc in neat cement slurry complete all as specified and directed. 119 M&L for PCC 1:2:4 type B0 (Using 12.50mm gradedstone aggregate) in roof padding/kerbs/sunken slab etc complete all as specified and directed. 120 M&L10 mm thick plastering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed. 121 M&L for Water proofing treatment on Non approachable / non accessible and approachable roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete all as specified and directed. (a) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm(b) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.(c) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard weight not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (d) Applying two coats of bituminous aluminium paint @ 110 gm/Sqm including preparation complete 122 Taking down carefully aluminium point wiring(any type)for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendents holder, ceiling rose, sketch fittings, tube light fittings, regulatores unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxesand making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash all as specified and directed by Engineer-in-Charge. 123 M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit medium grade ISI marked including all conduit accessories for concealed wiring for one light/fan/ / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting& making good disturbed surface & applying finishes to match existing surfacecomplete all as specified and directed. 124 The same as item no 123 here-in-before but one 3 pin, 5 amp socket out let onindependent board complete all as specified and directed. 125 The same as item no 123 here-in before but 3pin, 5amp socket out let on the same board with other switchcomplete all as specified and directed. 126 The same as item no 123 but for one bell/buzzer pointcontrolled by one bell push single pole one way . 127 The same as item no 123 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm. 128 M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit medium grade ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 4 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting& making good disturbed surface & applying finishes to match existing surfacecomplete all as specified and directed. 129 M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0Sqmm (nominalarea) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit medium grade ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLStype PVC insulated unsheathed cable multi-strandedcopper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit &sinking for boxes & making goodto walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiringcomplete all as specified and directed.NOTE :Two runs of 6Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length. 130 M&L for sub main wiring withPVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x4 sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Note - Two runs of 4sqmm including one run of 4 sqmm including PVC conduit shall be measured as unit length. 131 S & F for switch piano, flush type, 5 amps, single pole, one way, 230 voltcomplete all as specified and directed. 132 S & F bell push switch 5 Amp flush type complete all as specified and directed. 133 S & Ffor2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1complete all as specified and directed. 134 S & F for bell, ding- dong , AC, 230 Volt, single polecomplete all as specified and directed. 135 S&F switch socket combination 2 in 1, 6 pin16 Amps multipurpose type 240 volts complete all as specified and directed. 136 S&Fceiling rose single phase, PVC poly carbonate,insulated bodythree terminals ISI marked complete all as specified and directed. 137 S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for1 x 63Amp TPNas incomer and MCB SPN as outgoing connection through proper size of lugs and cable glandsincluding taking down existing MCB DBscomplete all as specified and directed. 138 Supply and fixing 415V 10KA C curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 63 Amp in the DB with connection testing and commissioning complete all as specified and directed. 139 S& F for sheet metal enclousre factory made for MCB DBs SPN, 12 way, double door, 240 Volts with bus bars including taking down existing unserviceable MCB DB complete all as specified and directed. 140 S&F MCB SP 240 Volt 6 TO 40Amp ISI marked conforming to C curve, breaking capacity 10 KA complete all as specified and directed. 141 S&F MCB SPN40 to 60 amp 30mA for earth leakage. Over load and short circuit protection ISI markedcomplete all as specified and directed. 142 M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m)as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm borefor protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-castRCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steelhandle 12 mmdia, PGIfunnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthingcomplete all as specified and directed. (Note:-The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.) 143 Excavation in trenches, not exceeding1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,laying of cables etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. 144 Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 145 Supplying laying, jointing, testing and commissioning XLPE cable cross sectional area 35 Sqmm, 3.5 core insulatedarmoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existingold /unserveciablecable complete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective items. 146 S &F for 50 mm dia GI pipe light grade ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hardstandingincluding taking down existing pipe complete all as specified and directed. 147 M&L Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed.NOTE :Punned thickness only shall be measured for payment purpose. 148 Supply and laying dry well burnt locally available brick sub class B laid flat with width equal to the length of whole bricks over cable as cable protection complete all as spcified and directed. 149 Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed. 150 S&F five stepped type electronicfan regulator socket type, compatible for BLDC fanAC 230 volt suitable for any type of ceiling fan complete all as specified and directed. 151 Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box typeExtruded aluminum housing (enhances safety) with high quality polycarbonate diffuser, 4 ft,2000lm,voltage protection range 140V -270 V,NW 4000K,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 152 Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box typeExtruded aluminum housing (enhances safety) with high quality polycarbonate diffuser,2 ft, voltage protection range 140V -270 V,NW ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 153 S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body, heat resistant glass, including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed with and including GI pipe medium grade 40 mm fixed to pole complete all as specified and directed. 154 Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed including taking down old unsv one and deposit in MES store for BER.. 155 Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH complete all as specified and directed including taking down old unserviceable meter and deposite in MES store for BER.
