|
| 1 | CONFERENCE TABLEGODREJ MINGLE 2 STR TABLE (Model No.- 56404706SD00348-350) :- Supply and placementGodrej 2 STR-1350 X 600 X 730 150Mingle PLT Conference Table Worksurface : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure : It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Modesty Panel : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS 12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns) Wire Management : An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injectionmoulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop.The Product should have Green Pro Certificate, GRIHA Certificate,Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate |
| 2 | RECEPTION TABLE REFLECTION LINEAR 1500 + REFLECTION LINEAR 2400 :- Supply and placementGodrej Reception Table - reflection 1500 Linear Size- 1500 mm x 870 mm x 1080 mm & reflection 2400 Linear Size- 2400 mm x 870 mm x 1080 mm Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Modulecutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories : Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging.The Product should have Greenguard Certificate (from UL) and Indoor Advantage GOLD Certificate.The Product should have Indian Design Mark Certificate, Green Pro Certificate, GRIHA Certificate, BIFMA Compliance, Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM |
| 3 | STAGE CHAIR -HIGH BACK REVOLVING CHIR (Model No.- GRETA 2.0 ) :- Supply and placement as per order as per approve Godrej Greta 2.0 Full Back Chair (56101522SD04105)SEAT ASSEMBLY: The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass filled Nylon which is upholstered with Mesh fabric.The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m³ and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE) :The height adjustable armrest is made of Polypropylene and can be adjusted to 6.0±0.1cm height.It also has swivel and To and Fro adjustment with moulded PU armtop. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features:· 360° revolving type · Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort. · Tilt tension adjustment can be operated in seating position. · 5 position Tilt limiter giving option of variable tilt angle to the chair. · Seat / back tilting ratio of 1:2.The Product should have Green Pro Certificate, BIFMA Compliance, Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & shouldhave AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed) |
| 4 | RECEPTION CHAIR-GODREJMID BACK REVOLVING CHAR (Model No.-DIVA FU 7046 ) :-Supply and placement ofGodrej Revolving FU 7046 chair The seat made from 1.2cm. thk. hot pressed plywood and back is injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D) BACK SIZE: 40.0cm(W) x 47.0cm.(H). The seat and back covers are injection moulded in black Co-polymer Polypropylene. The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. The one-piece armrests areinjection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5cm. thk. HR steel. Should have Permanent contact mechanism designed with the features such as 360° revolving type, 14° maximum back-tilt only, Upright position locking and Tilt tension adjustment. The pneumatic height adjustment has an adjustment stroke of 9.0 cm. The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors (castor wheel dia. 5.0cm.). Theedestal is 57.0 cm. pitch-centre dia. (67.0 cm with castors). The twin wheel castors are injection moulded in Black Nylon.The Product should have Greenguard Certificate (from UL) Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed |
| 5 | MEETING CLASSROOM SYSTEM GODREJ NAMASTE-II DESKING SYSTEM (Model No.-56121506SD00297-299-301 ) :-Supply and placement ofGodrej Namaste II A platform based design with user assisted closing seat & fixed desk system for lecture theatre rooms, auditoriums as well as Corporate training rooms. as consisting below: 3 seat module-(i) 3 seat with desk for front module.(4 nos) (ii) 3 seat with seat & desk for middle module.(16 nos) (iii) 3 seat with seat for rear module seat (4 nos) . Understructure:- Understructure is made with steel ERW tube section(IS:7138) of size 80x40x2.5mm thick with epoxy based powder coat finish with thickness of 50 microns (±10).- Understructure consists of two welded leg assemblies connected by means of welded seat side tube assembly. - Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure. - Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts. Side Clads: Side clad is made of 36mm thk (18+18 OSR cold pressed board) with 2mm thk pvc lipping. Desk system:- Desk panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Desk has depth of 415mm with provision of switch plate mounting. Desk is of fixed type. Shelf system: - Shelf panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Shelf has depth of 240mm. Shelf is not provided in case of rear module.Modesty Panel: -Modesty panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Modesty panel has height of 438mm. Back Panel:- Bacpanel is made up of 18mm thk PLT with 2 mm pvc lipping all over.Back panel is without cushion. Seat:-Seat understructure is a combination of welded fabricated structure made of Ø19X2mm thkERW tube (is:7138) with epoxy based powder coat finish which is covered by 0.8mm thk sheet metal cover and upholstered with moulded foam inside and leatherite cover. Seat can be folded up to free up space by the user i.e. seat need to be closed by user after use. Wire carrier:- Wire carrier is made of 0.8mm thk sheet metal for holding wire passings.Wires can be only routed through the specified individual modules but can not be passed through multiple modules and the wirings is to be terminated at individual module. Switch plate: Switch plate is made of 2mm thk sheet metal for switch plate mounting suitable for anchor roma plates. Switch plate is suitable for 6 modules Anchor Roma Tresa .The Product should have Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed) 3 seat with desk for front module |
| 6 | MEETING CLASSROOM SYSTEM GODREJ NAMASTE-II DESKING SYSTEM (Model No.-56121506SD00297-299-301 ) :-Supply and placement ofGodrej Namaste II A platform based design with user assisted closing seat & fixed desk system for lecture theatre rooms, auditoriums as well as Corporate training rooms. as consisting below: 3 seat module-(i) 3 seat with desk for front module.(4 nos) (ii) 3 seat with seat & desk for middle module.(16 nos) (iii) 3 seat with seat for rear module seat (4 nos) . Understructure:- Understructure is made with steel ERW tube section(IS:7138) of size 80x40x2.5mm thick with epoxy based powder coat finish with thickness of 50 microns (±10).- Understructure consists of two welded leg assemblies connected by means of welded seat side tube assembly. - Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure. - Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts. Side Clads: Side clad is made of 36mm thk (18+18 OSR cold pressed board) with 2mm thk pvc lipping. Desk system:- Desk panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Desk has depth of 415mm with provision of switch plate mounting. Desk is of fixed type. Shelf system: - Shelf panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Shelf has depth of 240mm. Shelf is not provided in case of rear module.Modesty Panel: -Modesty panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Modesty panel has height of 438mm. Back Panel:- Bacpanel is made up of 18mm thk PLT with 2 mm pvc lipping all over.Back panel is without cushion. Seat:-Seat understructure is a combination of welded fabricated structure made of Ø19X2mm thkERW tube (is:7138) with epoxy based powder coat finish which is covered by 0.8mm thk sheet metal cover and upholstered with moulded foam inside and leatherite cover. Seat can be folded up to free up space by the user i.e. seat need to be closed by user after use. Wire carrier:- Wire carrier is made of 0.8mm thk sheet metal for holding wire passings.Wires can be only routed through the specified individual modules but can not be passed through multiple modules and the wirings is to be terminated at individual module. Switch plate: Switch plate is made of 2mm thk sheet metal for switch plate mounting suitable for anchor roma plates. Switch plate is suitable for 6 modules Anchor Roma Tresa .The Product should have Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed) 3 seat with seat & desk for middle module. |
| 7 | MEETING CLASSROOM SYSTEM GODREJ NAMASTE-II DESKING SYSTEM (Model No.-56121506SD00297-299-301 ) :-Supply and placement ofGodrej Namaste II A platform based design with user assisted closing seat & fixed desk system for lecture theatre rooms, auditoriums as well as Corporate training rooms. as consisting below: 3 seat module-(i) 3 seat with desk for front module.(4 nos) (ii) 3 seat with seat & desk for middle module.(16 nos) (iii) 3 seat with seat for rear module seat (4 nos) . Understructure:- Understructure is made with steel ERW tube section(IS:7138) of size 80x40x2.5mm thick with epoxy based powder coat finish with thickness of 50 microns (±10).- Understructure consists of two welded leg assemblies connected by means of welded seat side tube assembly. - Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure. - Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts. Side Clads: Side clad is made of 36mm thk (18+18 OSR cold pressed board) with 2mm thk pvc lipping. Desk system:- Desk panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Desk has depth of 415mm with provision of switch plate mounting. Desk is of fixed type. Shelf system: - Shelf panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Shelf has depth of 240mm. Shelf is not provided in case of rear module.Modesty Panel: -Modesty panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Modesty panel has height of 438mm. Back Panel:- Bacpanel is made up of 18mm thk PLT with 2 mm pvc lipping all over.Back panel is without cushion. Seat:-Seat understructure is a combination of welded fabricated structure made of Ø19X2mm thkERW tube (is:7138) with epoxy based powder coat finish which is covered by 0.8mm thk sheet metal cover and upholstered with moulded foam inside and leatherite cover. Seat can be folded up to free up space by the user i.e. seat need to be closed by user after use. Wire carrier:- Wire carrier is made of 0.8mm thk sheet metal for holding wire passings.Wires can be only routed through the specified individual modules but can not be passed through multiple modules and the wirings is to be terminated at individual module. Switch plate: Switch plate is made of 2mm thk sheet metal for switch plate mounting suitable for anchor roma plates. Switch plate is suitable for 6 modules Anchor Roma Tresa .The Product should have Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed)3 seat with seat for rear module seat |
| 8 | MEETING CLASSROOM SYSTEM GODREJ NAMASTE-II DESKING SYSTEM (Model No.-56121506SD00297-299-301 ) :-Supply and placement ofGodrej Namaste II A platform based design with user assisted closing seat & fixed desk system for lecture theatre rooms, auditoriums as well as Corporate training rooms. as consisting below: 3 seat module-(i) 3 seat with desk for front module.(4 nos) (ii) 3 seat with seat & desk for middle module.(16 nos) (iii) 3 seat with seat for rear module seat (4 nos) . Understructure:- Understructure is made with steel ERW tube section(IS:7138) of size 80x40x2.5mm thick with epoxy based powder coat finish with thickness of 50 microns (±10).- Understructure consists of two welded leg assemblies connected by means of welded seat side tube assembly. - Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure. - Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts. Side Clads: Side clad is made of 36mm thk (18+18 OSR cold pressed board) with 2mm thk pvc lipping. Desk system:- Desk panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Desk has depth of 415mm with provision of switch plate mounting. Desk is of fixed type. Shelf system: - Shelf panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Shelf has depth of 240mm. Shelf is not provided in case of rear module.Modesty Panel: -Modesty panel is made up of 18mm thk PLT with 2 mm pvc lipping all over. Modesty panel has height of 438mm. Back Panel:- Bacpanel is made up of 18mm thk PLT with 2 mm pvc lipping all over.Back panel is without cushion. Seat:-Seat understructure is a combination of welded fabricated structure made of Ø19X2mm thkERW tube (is:7138) with epoxy based powder coat finish which is covered by 0.8mm thk sheet metal cover and upholstered with moulded foam inside and leatherite cover. Seat can be folded up to free up space by the user i.e. seat need to be closed by user after use. Wire carrier:- Wire carrier is made of 0.8mm thk sheet metal for holding wire passings.Wires can be only routed through the specified individual modules but can not be passed through multiple modules and the wirings is to be terminated at individual module. Switch plate: Switch plate is made of 2mm thk sheet metal for switch plate mounting suitable for anchor roma plates. Switch plate is suitable for 6 modules Anchor Roma Tresa .The Product should have Greenguard Certificate (from UL), Indoor Advantage GOLD Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed)M10 * 165 CAS 12 pcs / pkt ( Chem) |
| 9 | BED-GODREJ ADRIANA QUEENBED :- Supply and placement ofGodrej Adriana QUEEN Bed Colour-Walnut (56101515SD00048) Overall Size:Length 2060.0 mm Width 1733 mm Height 945.0 mm Material Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness. Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board. Head board ,Tail board and Side rail are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. The Product should have Green Pro Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL)Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). |
| 10 | BED-GODREJ ADRIANA SINGLE BED :-supply and placement ofGodrej Adriana Single Bed Colour-Walnut (56101515SD00048) Overall Size:Length 2060.0 mm Width 1131.0 mm Height 945.0 mm Material Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness. Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board. Head board ,Tail board and Side rails aremade of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. The Product should have Green Pro Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM |
| 11 | BEDSIDE TABLE GODREJ ADRIANA BEDSIDE TABLE :- Supply and placement of Godrej Adriana Bed Side Table from ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, OHSAS 18001:2007, BIFMA Certified Manufacturers and as per approved drawing & design/specification. Overall Size : Depth - 450.0 mm, Width - 440.0 mm, Height - 510.0 mm. Material : Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. Hardware : The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich. Construction : Knock Down construction. Packets : 1 packet. Finish : 18 mm thick Prelaminated Particle Board is in Walnut shade.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM. |
| 12 | MATTRESS-GODREJ ORTHO PLUS 78*60*4Supply and placement of rGodrejOrtho Plus Matress 78\"X60\"X4\" Thickness: 10 cm / 12.5 cm As intelligent as a mattress can get. A mix of different foams provides support and regularizes pressure points. Convolutedfoam in the topmost layer maintains airflow and enhances the comfort level by giving a feeling of acupressure to the body. A bonded foam in the base provides direct support, while a layer of softy foam in (5” variant) the middle provides indirect support to the reclining body. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM |
| 13 | MATTRESS -GODREJ SWING MATTRESS 78*36*4:- Supply and placement of Godrej make as per design approve as per order mattress Swing 78\"x 36\" x 4\" QUILTED / NONQUILTED QUILTED HICKNESS-MATTRESS 4\"+ SANDWITCH CONSTRUCTION SANDWITCH CONSTRUCTIONThickness MM 50DENSITY Gm/dcm3 28 BONDED FOAM( Both side) Thickness MM25 DENSITY Gm/dcm3 90 PILLED FOAM – QUILTING (Both Side)Thickness MM 10 PILLED FOAM DENSITY Gm/dcm3 18TOTAL MATTRESS THICKNESS INCH 4”+ TAPESTRY-GSM GSM 85 NATURE OF FABRIC POLYSTER PU FOAM THICKNESS MM 5 PU FOAM DENSITY Kg/m3 18.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM. |
| 14 | PILLOW-GODREJ PILLOW :Supply and placement ofGodrej Pillow Size ( in cm) : 43 x 69 Features-• Open cell structure that reacts to body heat and weight by moulding to the sleeper’s body • Organic Cotton Fabric for extra comfort • Anti-fungal & Anti-allergic• Excellent neck support• Outstanding elasticity• Durable.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificateswill not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM. |
| 15 | STUDY TABLE FLOYED STUDY TABLE Supply and placement of Godrej Floyd study table (56101597SD00023) Product Dimension: 60 L x 100 W x 74.6 H cm,Product Dimension: 60 L x 100 W x 74.6 H cm Material: Hardware Body panels are made of 18 mm thick Prelaminated Particle Board All the exposed edges are edge banded with 2 mm thick PVC edge banding. Door / drawer front are 18 mm thick made of 18 mm P.V.0 membrane pressed pertical Board. Shelf Front doorcomponents are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 2 mm thick PVC edge banding. Shelf bottom are made of 18 mm thick Prelaminated particle board.The high quality hardware used like Satin finish Handles of make SWASTIK, Slide Roller, rastex 15, wooden dowels is of make Hettich..Construction :Knock Down construction.Finish :.PVC membrane pressed MDF is in valigny oak Realistic Pore Shade. 18 mm thick Prelaminated Particle Board. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM. |
| 16 | CHAIR- GOREJ EARL VISITOR CHAIR FU 7212 Supply and placement of Godrej make EARL CHAIRS PCH-7212R. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0..1 cm. thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. * PCH-7212 (Visitor chair) SIZE: 49.5cm. (W) X 69.5cm. (H) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =45+1-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS: The one-piece armrests made of black integral skin polyurethane with 50-70 Shore Hardness and reinforced with M.S. insert. The armrests acre scratch and weather resistant. The armrests are fitted to the seat with seat armrest connecting bracket made of 0.3 ±0.022cm. thk. HR steel.4. CENTRE PIVOT MECHANISM (for PCH- 7201/02): The center pivot mechanism is designed with the following features: • 360° revolving type. • 17° ±2°maximum tilt on pivot at cerntre. • Tilt tension adjustment. • Upright position locking.TUBULAR UNDERSTRUCTURE (for PCH-7212R): The understructure is made of 0 2.54 ±0.03crn. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns).The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM |
| 17 | CHAIR GODREJ VISITOR CHAIR FU 1007 : - Supply and placement ofGodrej FU 1007 Visitor chair with the seat and back are made from 1.0cm thk. hot pressed water resistant, commercial plywood upholstered with P.U. foam and fabric. BACK SIZE: 42.0cm. (W) X 26.5cm. (H) SEAT SIZE: 42.0cm. (W) X 42.0cm. (D), having Polyurethane foam, moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 kg. on Hampden machine at 25% compression. The understructure assembly is a cantilever type mainframe made of dia. 2.54cm.(1”) x 14 BG M.S. E.R.W. tube and black powder coated. The armrests are made in twin tube form using dia.1.58cm. (5/8”) x 16 BG. M.S. E.R.W. tube and black powder coated. Manufacturer should be a certified member of BIFMA, SEFA-8 and should be following managementsystems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007, AIOTA, Greenguard-VOC and energy management system Certificates as per ISO 50001:2011in accordance with the TÜV NORD CERT auditing and certification procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products and Provide Solutions for Home & Work Space and should have Green Guard Certification for few of its products also should have the service set up at least at district headquarter. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM |
| 18 | WORDROBE-GODREJ ADRIANA 2 DOOR WORDROBE :- Supply and placement ofGodrejAdriana 2 Door Wardrobe (Model WD2) has an overall size including top cornice of 946.0 mm in width, 598.0 mm in depth, and 1941.0 mm in height. The body panels, doors, side panels, and drawer components are constructed from 18 mmthick Prelaminated Particle Board, with all exposed edges finished with 0.8 mm thick PVC edge banding for enhanced durability and aesthetics.The side panels additionally feature an imported HDF foil-wrapped decorative trim. The body back panel and drawer bottom are made from 8 mm thick Prelaminated Particle Board. The top cornice is made of an imported HDF foil-wrapped decorative trim, providing a premium finish to the unit.The wardrobe uses high-quality hardware from the brand Hettich, including roller slides, hinges, minifix fittings, and wooden dowels. A three-way lock is provided for the main door, while the drawer is secured with a cam lock.The wardrobe is designed with a knock-down construction for ease of transportation and assembly. The finish is in a rich Walnut shade, applied on 18 mm thick Prelaminated Particle Board. The Product should have Green Pro Certificate. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM. |
| 19 | RACK-GODREJ KREATION X2 1 DOOR WARDROBE:- Supply and placement ofGodrej Kreation X2 1 door steel wardrobe with overall size 450w X 520D X 2025H mm is going to be a signature collection. Each individual unit comes with 3 shelves and one hanging rod.Kreation Accessory details n Hinge: Self Closing Hinge of Hettich make Door alignment can be done by adjusting the Hinge. n Lock: Main Unit:3 Way lock Add on unit:3 Way lock Handle: Aluminum Die cast Handle. KREATION X2, using knock-down construction, breaks the notion that steel wardrobes cannot be modular in nature. Designed with limited, concealed fasteners allows the user flexibility to dismantle and re-assemble the the structure for easy shifting and reconfiguration, along with lending aclean panel look. The Product should have Green Pro Certificate.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA:2019, Green Pro, IAQ and Green Guard (from UL) Certification. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed). The bidder or their OEM should not be blacklisted from any Govt. establishment in the past from the date of submitting the bid. The bidder has to submit a bid specific authorization certificate from the OEM. |
