Tender For Special Repair To Old Power House Building At Af Stn Memaura; 1 Taking down of chowkhat with shutter (without taking off shutters from the frame) area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and directed. 2 Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed. 3 Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. 4 Dismantling wrought iron or mild steel work of any description as in frame work for false ceiling etc complete all as specified and directed 5 S&F of Asbestos cement plain building boards of 4mm thick with Anodised aluminium snap grid frame work (size of grid 605 x 605mm), T section of main & secondary runner as directed by Engineer-in-Charge for false ceiling complete all as speciofied & directed. 6 Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc complete all specified and directed 7 M&L for brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed 8 M&L for brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 (except bricks) complete all as specified and directed 9 Demolition of cement concrete in ground floors and pavings n exe 15cm thickness (below or above ground level) of any description and in any position not otherwise specifically provided complete all as specified and directed incl removing debris/cement concrete exc 250m but exc 500m and deposited where directed 10 M&L for 40mm thick PCC Type B-0, 1:2:4 (12.5mm graded aggregate) finishing surfaces of concrete topping even and fair (without using extra cement) etc complete all as specified and directed 11 M&L for Glass dividing strips, 3 mm thick and 38mm width inserted inposition, conform to design all as specified and directed 12 Taking down of cement plaster of any description from brick or stone wall etc incl raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 13 M&L 15mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed. 14 M&L 15mm thick rendering in CM 1:4 on other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed. 15 M&L for providing cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) incoping,kneelers, apex, bed plates, kerbs not provided, water troughs and like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. 16 M&L for preparation of newly plastered wall/concrete surface and applying two coats of white wash etc complete all as specified and directed. 17 M & L for preparation of old plastered surfaces of RCC/stone/concrete/brick walls including preparation of scraped suraface by removing all depression and applying two coats of 100% premium acrylicemulsion paintin camouflaging pattern (Sigma MK-III pattern) having VOC less than 50 gm/lit and UV resitance as per IS 15489-2004 alkali and fungal resitance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/10 Sqm over 3mm thick wall care putty etc complete all as specified including necessary scaffolding arrangement and as directed by Engineer-in-Charge. 18 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed . 19 M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in sub floor, sub base etc even and rough to receive screed bed etc (without using extra cement) complete all as specified and directed. 20 M&LNon skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors set and jointed in neat cement slurry and pointed with whiteor cement to matchover and including 15mm screed bed in cement mortar 1:6 complete all as specifed. 21 M & L galzed ceramic coloured joint free tiles450 x 350 x 6 to7 mm/ 450x300x6 to 7mm thick on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces including 10mm thick rendering in CM 1:4 complete all as specified and as directed. etc complete all as specified and directed. 22 S&F in repairs of vitreous china squatting pan, Orissa pattern, size of 680 x 470 mm white, with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe, etc including making good to floor including 10 litres PVC valveless syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle incl brackets, including flush pipe of PVC 32mm dia, for low level cistern etc complete all as specified and directed 23 S&F in repairs of vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe including flushing cistern, flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with incl 60mm long brass screws, pointing around urinal back in cement incl fixing supply pipe to flushing cistern etc complete all as specified and directed 24 S&F in repairs vitreous china wash basin, white, flat back, size 450x300mm including cutting for and pinning in ends of brackets or erecting stand including fixing of supply and waste pipe with gratings etc complete all as specified and directed 25 S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing. 26 S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings. 27 S&F factory made solid WPC door frames of size 125mm x 60 mm fixed in opening as per specification & drawing. 28 S & F 35mm Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. 29 S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed. 30 S&F 150mm aluminium anodised barrel tower bolts of extruded section all as specified 31 S& F 150 mm extruded aluminum alloy handles, fabricated type anodised. 32 S&F aluminium alloy, anodised, sliding door bolt of size 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy etc complete all as specified and directed 33 Supply and fixing Powder coated aluminium Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels)made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension.comprising of powder coated multi chambered frame, with inbuilt roller track and sash extruded profiles , appropriate dimension of aluminium extruded glazing beads and aluminium extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (glass and wire mess paid separately)Note: For Aluminium frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 34 S&F in repairs 3.8 mm thick tinted glass of approved make and colour complete all as specified and directed 35 S&FAluminium XPM Jali of expended metal n exc 1Kg/Sqm ,cut to leangth bent to shape requiredand fixing with gavanised steel staples fixed to wood complete all as specified and dircted. 36 M & L for hardcore of broken stone boulders, of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified. 37 M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as insub base of floor etc complete all as specified 38 M&L for 50mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in hard standing finished the surface even and smooth without using extra cement complete all as specified and directed. 39 Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPEinsulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of sizecomplete all as specified and directed 40 (a) 2 core x 10 Sqmm 41 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation etc or for laying pipe lines and getting out as in Soft/loose soil complete all as specified and directed. 42 Returning filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm in hard/dense soil, complete all as specified and directed. 43 Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 44 Burnt bricks sub class B laid flat dry across the cable for cable protection all as specified and directed. 45 Sand cushioning to UG cable 8cm thick before laying the cable and 15cm above the cable, stretching and testing of cable complete all as specified and directed. Note: (i) Consolidated / Punned sand shall be considered for purpose of payment (ii) Sand shall be same as specified for plastering work. 46 Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for including disposal of unserviceable material complete all as specified and as directed. 47 M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for to support the pipe line etc, including necessary form work complete all as specified and directed. 48 Taking down copper/aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. 49 M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25mm ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and makinggood disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- 50 (a) One light point controlled by one, one way switch 5 Amps 51 (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator 52 (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. 53 (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. 54 S & F for switch piano type single pole 5 amp, 230 Volts complete all as specified and directed. 55 S & F for socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed. 56 S & F for ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete. 57 S & F for sheet metal enclosure MCBDBSPN4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 58 S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, C curve complete all as specified and as directed. 59 S & Ffor MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, C curve complete all as specified and as directed. 60 S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Havells,Crompton,Bajaj. 61 S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :-Bajaj,Crompton,Havells 62 S & F 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, B class insulation having aerodynamic profile blades for silent operation comprising of remote and electronic fan regulator, 3 nos. blades with dust and mark resistance coating, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding fan motor having power factor not less than 0.9, minimum service value 3.5 CMM/W, Air delivery minimum 280 CMM as per IS-374:1979 (amended upto Mar 2002) including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC supply complete all as specified and directed. Make: Havells,Bajaj,Crompton ,Orient. 63 S & Ffor exhaust fan made of styurdy engineering plastic body heavy duty single phase 250 mm sweep,50 HZ,RPM 1200 ,240 Volts, AC with and includinglouvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site.Make: Havells,Bajaj,Crompton ,Orient. 64 S & Ffor exhaust fan made of metal body heavy duty single phase 450 mm sweep,50 HZ,RPM 1200 ,240 Volts, AC with and includinglouvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site.Make: Havells,Bajaj,Crompton ,Orient. 65 M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 66 Supply and fixing of GI Tubing 50mm bore , medium grade with all fittings fixed to wall, floor, ceiling or laid in floors as directed. Make: Jindal/Prakash Surya. 67 Supply and fixing hook for hanging ceiling fans and similar small articles confirming to Fe-290 Gde-E-165 complete all as specifed and directed. 68 Cutting walls of any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.
