Tender For Addl/Altn Of Building No P-121 Kilo Force Officers Mess (Modular Kitchen) And Kilo Force Jcos, Mess (Modular Kitchen) Of Hq Cif (K) Under Age (I) Cif (K); 1 Construction/fabrication/fixing of Modular kitchen for Officers Mess with following specifications andas shown in drawing attached. complete all as specified and directed by AGE(I).The specifications, quantities, Hardware and Accessories to be usedin the work will be as under:- 2 (a) Tandem Drawers for 700 mm Cab- 02 Nos(b) Tandem Drawers for 900 mm Cab- 02 Nos (c) Sink KA Garnet Black 34x20x8- 01 No(d) Sink Mixer- 01 No(e) Angle Value- 02 Nos(f) Full Overlay Hinges- 40 Sets (g) Glass Shelves- 06 Nos (h) Handles- 08 Nos (j) PVC Legs- 80 Nos (k) Cabinet Mini-Fix- 200 Nos (l) SS G Profile- 30 Feet(m) Skirting- 35 Feet (n) Profile Handle- 30 Feet(o) Profile frame- 55 Feet(p) Glass-35 Sqft(q) Granite- 55 Sqft (r) Visible- 190 Sqft (s) Cabinet Joint Connectors - As per design Specification :-Boards:- (a) 18mm HDHMR for upper and lower carcass cabinet. (b) Boilo ( Boiling Waterproof) 18mm thick for sink unit.(c) Uv HDF Finish for shutters.Hardware, Hinges and Profile :-Hettich/ Wurfel/ Hafele or equivalent as approved by AGE (I).Edge Bending Tapes:-(a) 0.8mm Edge bending tape for cabinets.(b) 2mm Edge bending Tapesfor shutters. (This process will be performed with fully automatic trough feed machinery with Jowat Glue Balls).Note:-The material should be ISI marked/BIS specification and the quantity shown may vary at the time of execution and contractor shall not have any claim on this account 3 Construction/fabrication/fixing of Modular kitchen for JCOs Mess with following specifications andas shown in drawing attached. complete all as specified and directed by AGE(I).The specifications, quantities, Hardware and Accessories to be usedin the work will be as under:- 4 (i) Tandem Drawers for 600 mm Cab- 03 Nos(ii) Tandem Drawers for 900 mm Cab- 02 Nos (iii) Dish Rack 900 mm- 01 No(iv) Sink KA Garnet Black 34x20x8 - 01 No(v) Sink Mixer-01 No (vi) Angle Value-02 Nos (vii) Full Overlay Hinges-25 Sets(viii) Glass Shelves-03 Nos (ix) Handles- 05 Nos(x) PVC Legs- 50 Nos (xi) Cabinet Mini-Fix- 100 Nos(xii) SS G Profile- 30 Feet (xiii) Skirting- 30 Feet(xiv) Profile Handle- 15 Feet (xv) Profile frame- 25 Feet (xvi) Glass- 20 Sqft(xvii) Granite- 50 Sqft (xviii) Visible- 120 Sqft(xix) Cabinet Joint Connectors- As per design (xx) Hob KA Ella Plus 3B 75 cm- 01 No (xxi) Chimney KA Cooker Hood Chroma ss/Black 75 cm- 01 NoSpecification :- (i) Boards:- (a) 18mm HDHMR for upper and lower carcass cabinet.(b) Boilo ( Boiling Waterproof) 18mm thick for sink unit.(c) Uv HDF Finish for shutters. (ii)Hardware, Hinges and Profile:- Hettich/ Wurfel/ Hafele or equivalent as approved by AGE (I). (iii)Edge Bending Tapes:-(a)0.8mm Edge bending tape for cabinates.(b) 2mm Edge bending Tapesfor shutters.(This process will be performed with fully automatic trough feed machinery with Jowat Glue Balls). Note:-The material should be ISI marked/BIS specification and the quantity shown may vary at the time of execution and contractor shall not have any claim on this account. 5 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. 6 M&L vitrified ceramic tiles light Shade 10mm thick(square/rectangle) polished area of each tiles exc 0.42 sqm but not exceeding1.0 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, complete all as specified and as directed. 7 M&L vitrified ceramic tiles light shade 10mm thick (square/rectangle) polished area of each tiles exc 0.42 sqm but not exceeding 1.0 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plasterin CM 1:4, complete all as specified and as directed. 8 Taking down cement plastering on stone wall/brick wall etc including racking out of joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. 9 M&L 15mm thick rendering in CM 1:6 onfair faces of brick/concrete surfaceand finishing the surface even and smooth with out using extra cement, complete all as specified and as directed. 10 M&Lpreparation of new plastered surfaces of walls and applying two coats of oil bound distemper over 3 mm thick wall care puttycomplete all as specified and as directed. 11 M&L preparation of old painted surfaces after complete removal of existing treatment and applying two coats of oil bound distemper over 3 mm thick wall care putty on wall complete all as specified and as directed. 12 Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets , any thickness incl cover fillets complete all as specified and as directed. 13 M&L Gl frame work of Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffits at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including S&F of 4mm thick Non asbestos fibre cement building boards fixed or laid/inseted to timber/GI frame work complete all as specified and as directed. 14 Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings not exceeding 1.5sqm each, complete all as specified and as directed. 15 Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings exc 1.5sqm not exceeding 4 sqm each, complete all as specified and as directed. 16 S&FAnodised aluminium frame (Powder coated minimum thickness of powder coating 50 micron)for doors, window, partition wall with one or more rebates including jointing cleats for fixing , rubber packing, anodised aluminum snap on beading for fixing glass panes in frame etc complete all as specified and directed. 17 S&F Anodised aluminium (Powder coated) minimum thickness of powder coating 50 micron)door shutter, aluminum section weighting 0.55 kg/ m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. 18 S&F anodised aluminium (Powder coated) minimum thickness of powder coating 50 micron) sliding window, ventilator shutterswith out sash bar, aluminium sction weighting 0.55 kg per sqm incl necessary jointing cleats, glazing , clips, rubber packing, anodised aluminum snap, beading, screws etc, complete all as specified and directed. 19 S&F brass mortice lock vertical type 100mm size 4 levers complete all as specified and as directed. 20 S&F cast iron body door closer hydraulically regulated designation no. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixing complete all as specified and as directed. 21 M&L 12 mm thick prelaminated particle board, interior grade, prelaminated on both side with decorative choice lamination and fixed with screws to aluminume frame work, complete all as specified and as directed. 22 S&F stainless steel wire wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staples complete all as specified and directed. 23 S&F 4mm thick , plain sheet glass, selected quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed. 24 Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. 25 M&L 25mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. Complete all as specified and directed. 26 Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar1:3 to ends or edges of shelves , for water tubing etc andmaking good, cutting exc 10cm girth but not exc 20cm girth in stone walls, complete all as specified and as directed. 27 Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lampholders brackets,bulk head fitting,tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and also making good distrubed surfaces of wall,floors etc complete all as specified and directed. 28 M&L One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 sqmm earthing) concealed wiring with FRLSH cable PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and includingnot less than 2mm thick PVCconduitwith all accessories and earth continuity connected to common earth duly accommodate modular box surface/ flush type with modular white cover plate with frame for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making goodto disturbed surface of wall, match to existing wall surface etc complete all as specified and directed. Note : Modular box surface/ flush type with modular white cover plate with frame will be measured and paid separately. 29 Descriptions all as per item No 26 above but One multipin 5/6 amps socket outlet on same board complete all as specified and directed. 30 Descriptions all as per item No 26 above but One multipin 5/6 amps socket outlet on independent board complete all as specified and directed. 31 Descriptions all as per item No 26 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sqmm for Phase & neutral and 2.5 Sqmm for earthing) complete all as specified and as directed. 32 S&F modular switch piano button flush type, single pole one way 6 amps complete all as specified and directed. 33 S&F modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed. 34 S&F modular switch piano button flush type, single pole one way 16 amps complete all as specified and directed. 35 S&FModular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed. 36 S&F ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified and as directed. 37 S&F Fan step modular regulator, 1 module complete all as specified and as directed. 38 S&F White cover plate with frame, 3 module complete all as specified and as directed 39 S&F White cover plate with frame, 4 module complete all as specified and as directed 40 S&F White cover plate with frame, 8 module complete all as specified and as directed 41 S&F Metal flush box 3 module complete all as specified and as directed 42 S&F Metal flush box 4 module complete all as specified and as directed 43 S&F Metal flush box 8 module complete all as specified and as directed 44 S&F in repairs 36 Watt LED Light Fittings 2ft x 2ft ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for armstrong/grid ceiling.mounting ceiling light fittings flush to ceiling complete all as specified and directed 45 Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed. 46 Hanging only ceiling fan (M.D. supply)andconnectingup including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. 47 S&F sheet metal enclosures for MCBs, single pole and neutral, 12 ways 240 Volts double door type complete all as specified and as directed. 48 S&F Auto clean Kitchen Chimney of Alloy Steel polishedwith Motion Sensor and Touch Control for 1500 cubic meter per hour and 90 CM width as per site requirementsuitable for heavy frying and grillingwith filterless auto clean Technology with Oil Collector and upto 9 speed Touch control for smooth operation with very low noise complete all as specified and directed.Make : Glen/ Elica/ Kaff. 49 S&F Auto clean Kitchen Chimney of Alloy Steel polishedwith Motion Sensor and Touch Control for minimum 1200 cubic meter per hour and 120 CM length and width as per site requirementsuitable for heavy frying and grillingwith filterless auto cleanTechnology with Oil Collector and upto 5 speed Touch control for smooth operation with very low noise complete all as specified and directed.Make : Glen/ Elica/ Kaff. 50 S&Fin replacementSPN 40 to 63 Amp, type C10KA, 240 Volts complete all as specified and as directed. 51 S&Fin replacement MCB SP 5 to 32 Amp, C10KA, 240 Volts complete all as specified and as directed. 52 S&F in replacement for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 10 Sqmm and drawing through& including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 10 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete all as specified and directed.NOTE : 3 runs of copper conductor cable 10sqmm and one run of PVC conduit shall be termed one unit 53 M&L for earthingcomplete with galvanized steel earth plate electrode60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvanised iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of2009 including dismantling old.Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmmin lieu of CI cover. 54 Notes :-An amount of Rs. 7950.00 on account of Credit Schedule for Schedule A Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.
