Tender For Welcome Maintenance And Misc B R Repair Works At Rashi Area Under Age B R Ii Nw Navy Nagar-- 1 M & L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engr-in-Charge. 2 M&L applying one coat of oil bound distemper on old decorated surfaces of wall and filling the surface inperfections such as holes, dirt, fine cracksincluding preparation of surface complete all as specified. 3 M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applyingtwo coat of synthetic enamel paint, complete all as specified and as directed by EIC. 4 M&L for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applyingtwo coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC. 5 M & L for preparation of wall surface and applying two coat of distemper oil emulsion over 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge. 6 S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to wooden doors / windows shutter with wooden beading (any size) and fixed aluminium window / vent with aluminium wire staples complete all as specified and directed by Engr-in-Charge. 7 S & F for in repair powder coated aluminium serrated finish 20/25mm dia curtain rod complete all as specified and directed by Engr-in-Charge. 8 S & F for in repair powder coated aluminium fancy types domes cum brackets suitable for 20/25mm dia curtain rod fixed with C/P screws & rovel plugs and fixed to both ends of the curtain rod etc complete all as specified and directed by Engr-in-Charge. 9 Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water complete all as specified and directed by Engr-in-Charge. 10 M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed by Engr-in-Charge. 11 M & L for rendering 5mm thick in CM 1:3 on ceilling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. 12 M & L for preparing newly plastered surfaces of wall, priming with alkali-resistant priming paint and applying two coats of distemper oil emulsion, white or tinted over 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge. 13 M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. 14 M & L in repairs CI Nahani trap dia of outlet 75mm with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including jointing to waste pipe in runlead complete all as specified and directed by Engr-in-Charge. 15 M & L for dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. 16 M&L non skid coloured ceramic tiles 7 to 8mm thick and area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including bedding layer of 20mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge. 17 M & L for coloured glazed ceramic tiles size 300x200x7mm on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match of the shade over and incl 10mm thick backing coat in C:M 1:4 complete all as specified and directed by Engr-in-Charge. 18 S&F in repair sink with drain board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers andwastes coupling fitting, including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge. 19 S & F in repair PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge. 20 M & L in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrestand anti syphonnage pipe includingP or S trap and provn of lime concrete ccomplete all as specified and directed by Engr-in-Charge. 21 M & L in repair vitreous china wash down water closet semi padestal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistren and flush pipe) withP or S trap ccomplete all as specified and directed by Engr-in-Charge. 22 S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed by Engr-in-Charge. 23 S & F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge. 24 S & F 32 mm dia Waste fittings, brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. 25 S & F LDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 32 mm bore fixed complete to walls, ceiling or in floorsincluding bendand sockets etc; any type of pipe complete all as specified and directed by Engr-in-Charge. 26 S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. 27 Taking up or down steel tubing and connections, including cleaning for refixing or removal to store ccomplete all as specified and directed by Engr-in-Charge. 28 S & F 15mm bore GI Tubing medium gradewith all fittings, laid in,wall or roof complete all as specified and directed by Engr-in-Charge. 29 Refixing of 15mm bore GI Tubing medium grade with all fittings, laid in trenches,wall or roof complete all as specified and directed by Engr-in-Charge. 30 S & F in repair bib taps, 15mm dia cast copper alloy fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. 31 S & F in repair Stop valves, 15mm dia cast copper alloy fancy type, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for uninons and fixed complete all as specified and directed by Engr-in-Charge. 32 S & F in repair Swivel shower of PTMT any colourwith shower arms 15mm size, any length with bend of 45 degree with flange of PTMT any colour for fixing with pipe complete all as specified and directed by Engr-in-Charge. 33 S & F chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. 34 S & F600 mm x 450 mm bevelled edge mirror of selected quality glass decorative type,mounted on 6 mm thick BWP grade plywood,fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed by Engr-in-Charge. 35 Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge. 36 S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed by Engr-in-Charge. 37 S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame complete all as specified and directed by Engr-in-Charge. 38 S&F in repair 3mm thick plain sheet glass ordinary quality and glazing fitted in wooden window n.exc 0.5 sqm in each pane incl necessary beading for securing glass complete all as specified and directed by Engr-in-Charge. 39 Taking down shutters of any description exc 1sqm but n exc 2sqm each complete all as specified and directed by Engr-in-Charge. 40 S & F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed by Engr-in-Charge. 41 S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two or three panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face.The size of rail shall be as per IS 1003 (Part-I)kiln seasoned and chemically pressure treated all as specified and directed. 42 S & F 35 mm thick factory made flush shutters, solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed by Engr-in-Charge. 43 S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)oraluminium wire staples and removing old beading, complete all as specified and directed by Engr-in-Charge. 44 S & F 100mm sizemedium weight butt hinges complete all as specified and directed by Engr-in-Charge. 45 S & F 75mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge 46 S&F 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. 47 S&F in repair 125 mm extruded aluminium handles, fabricated type anodised fixed complete all as specified and directed by Engr-in-Charge. 48 S&F 100 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. 49 S&F in repairs 100 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. 50 S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. 51 S&F in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. 52 S&F 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. 53 S&F in repairs 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. 54 S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. 55 S&F in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. 56 S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge. 57 S&F in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge. 58 M&L for two coat synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete as specified and as directed by Engr-in-Charge.
