Tender For Comprehensive Maintenance To Bldgs Of Group-I Units/Loc At Rms-- 1 S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldAsbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering /plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 2 S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldAsbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering /plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 3 S&F2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall complete all as specified and as directed. 4 S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer boardE-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any sizeincluding dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed. 5 M&L for second class hardwood plain fillets exceeding13sqcm and notexceeding 25sqcm, square or rectangular in section, wrought, secured with nails or brads. 6 M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exceeding 6 m mean radius, built in Cement Mortar (1:6) including demolition of old brick work complete all as specified and as directed. 7 M&L forbrick work with sub class B bricks(using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work complete all as specified and as directed. 8 M&L forrendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete work finished even and smooth without using extra cement using water proofingcompound @ 3% as per manufacturer instruction including taking down old plaster complete all as specified and as directed.Note:-WPC will be measured and paid separately. 9 M&L forrendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete work finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed. 10 M&L for15mm thick plastering in CM (1:4) on one side of lathing in two separate layers without using extra cement using water proofing compound @ 3% by wt of cement for finished even and smooth including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including M&L for GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed.Note:-WPC will be measured and paid separately. 11 M&L 10 mm thick plastering in CM 1:6 the other side of lathing finished even and smooth without using extra cement complete all as specified and directed. 12 M&L for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and as directed. 13 M& L for Preparation of new wall surfaces and applying two coats of white wash complete all as specified and as directed. 14 M&L for preparation of new plastered surfaces and applying two coats ofcement base paint over a coat of primerof approved shade on walls complete all as specified and as directed. 15 M&Lforcomplete removal of existing treatement on old plastered surface of wall & applying two coats of cement base paint over cement primer complete all as specified and as directed. 16 M&Lforcomplete removal of existing treatement on old plastered surface of wall & applying two coats of oil bound distemper over a coat ofprimer complete all as specified and as directed. 17 M&L for complete removal of exisitng treatment of old decorated surfaces ofwall applying two coats of oil emulsion distemper over a coat of primer over coat of wall care putty(2mm thick in two layers ) for obtained smoothness of wall surfaces complete all as specified and directed. 18 Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. 19 M&L for cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed. 20 M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms mouldscomplete all as specified and as directed. 21 M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed. 22 M & L for PCC (1:4:8) type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in hardstanding complete all as specified and as directed. 23 S&F in repairs4 mm thick veneered decorative Plywood (no of ply 05),grade-I (with BWRresin) with decorative face veneers on one face, fixedwith screws/nails to timber frame work complete all as specified and as directed. 24 M&L 25 mm thk PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in leveling course complete all as specified and as directed. 25 M&L for light shade vitrified ceramic tiles 9-10mm thick (Square / rectangular) of area exc 0.36 sqm but not exc 0.42 Sqm each, in floors laid over and including 15mm thick screed bedin CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tilesincluding dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 26 All as per Ser item No 25.00 (here-in-beofre) but as in skirting, laid over & including 10mm thick baking coat inCM (1:4). 27 M&L forcoloured Glazed ceramic tiles in vertical surface 300x200x7mm/350x 250x 7 mm/ 450X 350X 7mm thick laid over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles all as directed.set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tilesincluding dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 28 M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick CM (1:6) screed bed including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 29 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 30 Dismantling of wrought iron or mild steel work of any description complete all as specified and as directed. 31 S & F 2nd class hard wood scantling as in framed worketc clean sawn complete including dismantling of old from its position all as specified and directed. 32 All as per Ser item No 31.00 (here-in-before) but except timber complete all as specified and as directed. 33 M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed. 34 S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality-B complete all as specified and as directed. 35 S&Fsteelworkintubulartrusses, post, purlinsincludingspecialshapedwasheretc.CompleteusingERWorinductionbuttweldedtubesconformingtoIS1161-1979gradest-240complete all as specified and as directed. 36 S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guardbars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. 37 S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 Gde-E-165 complete all as specified and as directed. 38 S&F Mild steel, plain black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams complete all as specified and as directed. 39 M & L 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR typeadhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work with teak wood beading at the edges complete all as specified and as directed. 40 Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed. 41 Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and directed. 42 Taking down shutter not exceeding 1 Sqm each complete all as specified and as directed. 43 Taking downshutter of any descriptionexceeding 1.0 Sqmnexc 2Sqm each complete all as specified and as directed. 44 S&F powder coatedaluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and as directed. 45 S&F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and as directed. 46 S & F powder coated for aluminium door shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing ,handles 2 Nos in each door,hinges, anodised aluminium snap beading screws,mortice lock with keys complete all as specified and as directed. 47 M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and complete all as specified and as directed. 48 S&F aluminium anodised grill with mesh size 75 mm and aluminium bar 6 mm XPM type including all accessories such as channels for fixing grill screws etc, aluminium section 15 micron thick anodizing complete all as specified and as directed. 49 S&F for5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. 50 M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frameincluding dismantling of old unsv wall panelling (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any locationcomplete all as specified and as directed. 51 S & F for 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple complete all as specified and as directed. 52 M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and as directed. 53 S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 54 M&L for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and as directed. 55 M&L for 30mm thick 2nd class hard woodGlazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and as directed. 56 S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed. 57 S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site complete all as specified and as directed. 58 S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed. 59 M&L for PCC (1:2:4), type B-0,(using12.5 mm graded stone aggregates) as in bands, bed blocks, fixing hold fasts, filling of door frames etc complete including necessary formwork complete all as specified and as directed. 60 S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and as directed. 61 S&F butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size complete all as specified and as directed. 62 S&F butt hinges, medium weight 75 mm long sizecomplete all as specified and as directed. 63 S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long complete all as specified and as directed. 64 S&F Aluminium handle cast type anodised 150 mm long complete all as specified and as directed. 65 S&F 125mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed. 66 S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long)complete all as specified and directed. 67 S&F Aluminium, anodised, barrel tower bolt 150mm longof extruded section and fixed complete all as specified and directed. 68 S&F in repair Mortice lock,vertical type Brass 2 levers, size 100 mm etc complete all as specified and as directed. 69 S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. 70 S&F 40mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. 71 S&F continuous (Piano) hinges mild steel30 mm width bright finish or electro galvanised complete all as specified and as directed. 72 S&F 40 mm cupboards knobs fixed with nut screw and washer of mild steel, bright finished complete all as specified and as directed. 73 S&F in repairs Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws 100mm size complete all as specified and as directed. 74 S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers complete all as specified and as directed. 75 S&F in repair for aluminium (extruded section) bodydoor closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. 76 S&F double action floor springhydraulically regulated made upof minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainlessl steel cover governing pivot made of brass other parts made of mild steel heavyduty and fixed complete all as specified and as directed. 77 M & L 25mm thick second class hard wood boarding , plained one side with butt joints as ineaves boardsincluding dismantling of old boarding from its position complete all as specified and directed. 78 M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed. 79 M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. 80 M&L for applying one coat of synthetic enamel paint (1st grade) on old decorated steel surfaces of any description including preparation of old steel surfaces area over 10cm width & girth complete all as specified and as directed. 81 S&F in repairs 15 mm bore GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed. 82 All as per Item No. 81.00 (here-in-before) but fixing only. 83 S&F in repairs 20 mm bore GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed. 84 All as per Item No. 83.00 (here-in-before) but fixing only. 85 Supply and fix in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. 86 S & F in repairs vitreous china bowl urinal flat back size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and as directed. 87 S&F in repairs vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe)complete all as specified and directed. 88 S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover complete all as specified and as directed. 89 S&F in repairs plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair,complete all as specified and directed. 90 S&F in repairs one piece EWC with vibe sense duroplast slim seat cover and twin flush fittings 660x 350 x 745 mm (snow white) S trap 300mm and fittings complete all as directed (Make Cera and cat No S1013230 and equvalent) complete all as specified and directed. 91 S & F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, asfixed in repairs complete all as specified and directed. 92 S&F in repair PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket,inlet ball valve, floathandle and flush pipe (for EWC or WC) complete all as specified and directed. 93 S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 94 S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot or ‘Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 95 S&F in repairs for 15mm dia of pipeanglevalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and directed. 96 S&F in repairs CP wall mixer (3 in 1) complete all as specified and directed and as approved by GE. 97 S&F in repairs CP Central hole basin mixer fancy type 15mm dia complete all as specified and directed. 98 S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. 99 S&F soap dish chromium plated steel/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed. 100 S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete all as specified and directed. 101 S&F in repairsbrass chromium plated shower rose 125 mm in size with or without swivel joints any size including fixing to steel pipe or union, complete all as specified and directed. 102 S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and directed. 103 S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and directed. 104 S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and directed. 105 S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. 106 S&F of 110mm dia PVC (SWR) bends complete all as specified and directed. 107 S&F 75mm PVC(SWR) bends any radius with acess door complete all as specified and directed. 108 S&F of 75mm dia PVC (SWR) Vent cowl complete all as specified and directed. 109 S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 110 S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and directed. 111 Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty complete all as specified and directed. 112 S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square not exc 0.50 Sq.m in each pane, complete all as specified and directed. 113 S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square exc 0.50 Sq.m in each pane complete all as specified and directed. 114 S&Ffor galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 115 S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 116 M&L for disconnecting existing tanks capacity exc 500 Ltr & n exc 1000 Ltr, setting asidee (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position complete all as specified and as directed. 117 S&F in repairs rotational moulded polyethylene 1000Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed. 118 Supply only Integralwater proofing compound complete all as specified and as directed. 119 M & L for roof treatment (for staircase/tank portion of bldgs) including the following :-(i) Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.(ii) M & L for 25 mm thick Cement concrete type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in top of roof.(iii) Screed bed or bedding layer or mortar 15mm thick layer of cement mortar 1:4for laying floor finishes.(iv) Add to items if rendering is to be finished even and smooth in 1:4(without using extra lime or cement)(v) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces.(vi)APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric laid on primed surface by forced application complete all as specified 120 M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etcof suitable size as required at site complete all as specified and as directed. 121 Onelight controlled by one, one way switch. 122 One Ceiling fan/ Exhaust fan point controlled by one, one wayswitch. 123 One 3 pin socket outlet 5 Amps on the same board with other switches. 124 One 3 pin socket outlet 5 Amps on the switch socket Independent board 125 One bell pointcontrolled by one, one way switch . 126 All as per item No- 120.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. 127 S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed. 128 S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed. 129 S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed. 130 S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed. 131 S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed. 132 S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and as directed. 133 S&F in replacement of Bell AC 230 volts musical type complete all as specified and as directed. 134 S&F in repair bell push switch 5 amps piano type flush typecomplete all as specified and as directed. 135 S&F in repair 20W LED, 4, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fitting complete all as specified and as directed. 136 S&F in repair 10 W LED, 4, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fitting complete all as specified and as directed. 137 S&F in repairs Lamp holder , PVC/ Polycarbonate type with PVC round/square block for lamp holder complete all as specified and as directed. 138 S&F in repairs LED lamp 9 Watt suitable for lamp holder fittings complete all as specified and as directed. 139 S&F in repairs LED lamp 9 Watt(thread/pin type warm colour) suitable for lamp holder fittings complete all as specified and as directed. 140 S&F in repairs/replacement piano switch single pole 5A, one way complete all as specified and as directed. 141 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A Flush complete all as specified and as directed. 142 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A/16A Flush complete all as specified and as directed. 143 S&F in repairs/replacement socket outlet 5 pin 6A, 230 volt flush type complete all as specified and as directed. 144 S&F in repairs/replacement fan regulator 100/120 wall step type AC 220 volt complete all as specified and as directed. 145 S&F in repairs/replacementModular Switch 1 way 6A,1 module complete all as specified and as directed. 146 S&F in repairs/replacement modular switch 1 way 16A, 1 modulecomplete all as specified and as directed. 147 S&F in repairs/replacement Modular Socket ,6A/2/3 pin combined 2 module complete all as specified and as directed. 148 S&F in repairs/replacement Modular Socket ,6A/16A-2/3 pin combined 2 module complete all as specified and as directed. 149 S&F in repairs/replacement stepped type electronic fan regulator,120 W-2 module complete all as specified and as directed. 150 S&F in repairs/replacement modular white cover plate with frame 1/2 module complete all as specified and as directed. 151 S&F in repairs/replacement modular white cover plate with frame 3 module complete all as specified and as directed. 152 S&F in repairs/replacement modular white cover plate with frame 6 module complete all as specified and as directed. 153 S&F in repairs/replacement modular white cover plate with frame 8 module complete all as specified and as directed. 154 S&F in repairs PVC switch board 10x12 suitable for switch socket complete all as specified and directed. 155 S&F in repairs PVC switch board 8x10 suitable for switch socket complete all as specified and directed. 156 S&F in repairs PVC switch board 8 x 6 suitable for switch socket complete all as specified and directed. 157 S&F in repairs PVC switch board 7x4 suitable for switch socket complete all as specified and directed. 158 S&F in repairs PVC switch board 4 x 4suitable for switch socket complete all as specified and directed. 159 S&F in replacement of PVC cassing & caping 20 mm complete all specified and as directed. 160 S&F in replacement of PVC cassing & caping 25 mm complete all specified and as directed. 161 M&L for replacement of PVC conduit 20mmcomplete all as specified and as directed. 162 M&L for replacement of PVC conduit 25mm complete all as specified and as directed. 163 Supply and fixing for engagement LED 0.5w light red, green, complete all as specified and as directed. 164 M&L for sub main wiring Casing capingtwo run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length including taking down old unsv complete all as specified and as directed. 165 M&L for sub main wiring Casing capingtwo run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 6.0 Sq mm +one run of 6.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length including taking down old unsv complete all as specified and as directed. 166 S&F in repairs MCCB 4 Pole, 415 V, Adjustable type, 120 Amps with breaking capacity 16 KAcomplete all as specified and as directed. 167 S&F in repairs MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KAcomplete all as specified and as directed. 168 S&F in repairs MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KAcomplete all as specified and as directed. 169 S&Fwall Picture light, 7 Watt, bronze finish for superior feel long life LED light source warm 3000k with good colour complete all as specified and as directed. 170 S&F in repairs Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge.Note : Old Wall mounted fan shall be deposited to MES Store (AGE E/M) 171 S&F in repairs and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technologyfor inner tank with incoloy heating elementwith minimum4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessoriescomplete all as specified and as directed.Note : Old geyser shall be deposited to MES Store (AGE E/M) 172 S&F in repairs MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacitycomplete all as specified and as directed. 173 S&F in repairs MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed. 174 S&F in repairsMCB Distribution board double door type SPN 8 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacitycomplete all as specified and as directed . 175 S&F in repairs/Replacement ofMCB SPN 32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed. 176 S&F in repairs MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 177 S&F in repairs MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed. 178 S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed /surface (White/Warm Colour)type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all as specified and as directed. 179 S&F in repairs and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all as specified and as directed. 180 S&F in repairs flexible copper wire 23/76 wire complete all as per specified and directed. 181 S&F in repairs PVC Exhaust fan PVC200 mm sweep single phase 50 Hz AC, air flow rate of1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified anddirected by Engr-in-Charge.Note : Old exhaust fan shall be deposited to MES Store (AGE E/M) 182 S&F in repairs PVC Exhaust fan PVC250 mm sweep single phase 50 Hz AC, air flow rate of1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified anddirected by Engr-in-Charge.Note : Old exhaust fan shall be deposited to MES Store (AGE E/M) 183 S&F in repairs exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.Note : Old exhaust fan shall be deposited to MES Store (AGE E/M)
