Tender For Renovation Of Administrative Building And Other Plant Area In Kcm-- 1 PROVIDING AND LAYING THREE COURSES WATER PROOFING TREATMENT WITH BITUMEN FELT OVER ROOFS CONSISTING OF FIRST AND THIRD COURSES OF BLOWN OR/AND RESIDUAL BITUMEN APPLIED HOT AT 1.45 KG/SQUARE METER OF AREA FOR EACH COURSE OF ROOFING FELT OF SPECIFIED GRADE INCLUDING PREPARATION OF SURFACE EXCLUDING GRADING COMPLETE WITH: BITUMEN FELT (HESSIAN BASE) TYPE 3 GRADE I 2 REMOVING TAR FELT/BITUMEN FELT ETC. OVER ROOFS AND CLEANING THE SURFACE COMPLETE DUMPING THE MATERIALS OUTSIDE THE BUILDING AND TRANSPORTING THE SAME WITHIN ONE KM LEAD BY MECHANICAL TRANSPORT, LOADING, UNLOADING ETC. COMPLETE AS PER DIRECTION OF ENGINEER IN-CHARGE. 3 Structuralsteelworkriveted,boltedorweldedinbuiltupsections, trusses andframed work, including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer all complete: 4 DISMANTLING ROOFING INCLUDING RIDGES, HIP VALLEYS AND GUTTERS ETC. AND DEPOSITINGTHE SERVICABLE MATERIALS IN CENTRAL/SITE STORES AND INCLUDING DISPOSAL OF UNSERVICABLE MATERIALS WITHIN 50 M LEAD AS PER DIRECTION OF ENGINEER IN CHARGE. ASB 5 Dismantling of steel structure such as platforms, support railing, hoppers, chutes, ducts, cells dismantling of mech. Equipments and elect. Equipments/ assemblies including rubber lined pipe line all heights 6 Cement concrete flooring1:2:4 (1 cement : 2 coarse sand :4graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate. 7 REMOVING & REFIXING OF OLD HANDLES (LABOUR RATES ONLY) 8 REMOVING &REFICING OF OLD SLIDING DOOR BOLTS (LABOUR RATE ONLY) 9 Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) 10 Paintingwithsyntheticenamelpaintofapprovedbrandand manufacture to give an even shade :Two or more coats on new work 11 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking outjointsandpreparingandplasteringthesurfaceofthewalls completeincluding disposalofrubbishtothedumpinggroundwithin 50metres lead :With cement mortar 1:4 (1 cement : 4 fine sand) 12 Renewing glass panes, with putty and nails wherever necessary:Float glass panes of thickness 5.5 mm 13 White washing with lime to give an even shade :Old work (two or more coats) 14 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats) 15 Paintingwithsyntheticenamelpaintofapprovedbrandand manufacture of required colour to give an even shade :One or more coats on old work. 16 Finishing walls with water proofing cement paint of required shade :Oldwork (oneor morecoats applied @2.20kg/10sqm) overprimingcoatofprimerapplied@0.80litrs/10sqm complete including cost of Priming coat. 17 Carriage of material by mechanical transport including loading, unloading and stacking:Lime, moorum, building rubbish:Lead 1 KM. 18 Demolishingcementconcretemanually/bymechanicalmeans including disposal of material within 50 metres lead as per direction of Engineer - in - charge.1:3:6 or richer mix 19 DISMANTLING DOORS WINDOWS AND CLERSTORY WINDOWS (STEEL OR WOOD) SHRTTER INCLUDING CHOWKHATS, ARCHITRAVE, HOLDFASTS ETC. COMPLETE AND DEPOSITING THE SAME IN CENTRAL/SITE STORES. OF AREA 3 SQ.M AND BELOW 20 Dismantlingoldplasterorskirtingrakingoutjointsandcleaningthe surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 21 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 22 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6(1Cement:3coarsesand:6gradedstone aggregate 20 mm nominal size). 23 PROVIDING AND FIXING BRIGHT FINISHING HYDRAULIC DOOR CLOSER ( BEST MAKE OF APPROVED QUALITY ) WITH NECESSARY ACCESSORIES AND SCREWS ETC. COMPLETE. 24 PROVIDING AND LAYING 20 MM THICK PRECAST CEMENT CONCRETE TILES OVER ROOFS (AS PER I.S.1237-1980) WITH 1:2:4 MIX (1 CEMENT: 2COARSE SAND:4 COARSE STONE AGGREGATE 6 MM DOWN GRADE) FINISHED WITH NEAT CEMENT PUNNING, LAID OVER BED OF CEMENT LIME PLASTER 1:1:6 (1 CEMENT :1 LIME PUTTY :6 FINE SAND), 15MM AVERAGE THICKNESS IN REQUIRED SLOPE AFTER CLEANING AND REMOVAL OF EXISTING TERFELT INCLUDING DISPOSAL OF DISMENTLED TERFELT, INCLUDING RACKING OF JOINTS AND FLUSH POINTING WITH CEMENT MORTER 1:3 (CEMENT :3 FINE SAND) ON ROOFS INCLUDING PROVIDINGS GOLA WHEREVER REQUIRED AS PER SPECIFICATION. 25 Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) 26 Providingwoodwork in framesofdoors,windows,clerestorywindows and other frames, wrought framed and fixed in position : Sal wood 27 PROVIDING AND FIXING BY NAILOING 30 C.M. WIDE CHICKEN/RABBIT MESH ON THE WALLS SURFACE AS PER DIRECTION OF ENGINEER IN-CHARGE. 28 PROVIDING AND FIXING FLUSH DOOR SHUTTERS NON-DECORATIVE TYPE, CORE OF BLOCK BOARD CONSTRUCTION WITH FRAME OF 1ST CLASS HARD WOOD AND WELL MATCHED COMMERCIAL PLY VENEERING EITH VERTICAL GRAINS OR CROSS BANDS AND FACE VENEERS ON BOTH FACES OF SHUTTERS:35MM THICK INCLUDING ANODISED ALUMINIUM BUTT HINGES WITH NECESSARY SCREWS 29 Centeringandshutteringincludingstrutting,proppingetc.and removal of form for : Foundations,footings,basesofcolumns,etc.for mass concrete. 30 PROVIDING AND LAYING IN POSITION BITUMEN SAND FOR EXPANSION JOINT ETC USING 128 KG BITUMEN GRADE 80/100 PER CU.M OF SAND ETC. COMPLETE AS PER DIFECTION OF ENGINEER IN CHARGE. 31 DISMANTLING WOODEN PARTITION WALL INCLUDING FRAME WORK, COMMERCIAL PLY, DOOR SHUTTER WITH BUTT HINGES, WOODEN BEADING ETC. COMPLETE, AS PER DIRECTION OF ENGINEER IN- CHARGE. LABOUR RATE ONLY 32 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% andconformingtoIS:15622ofapprovedmakeinallcoloursand shades, laidon 20mm thick cement mortar 1:4 (1 cement: 4coarse sand)includinggroutingthejointswithwhitecementandmatching pigments etc., complete.Size of Tile 60x60 cm 33 Grading roof for water proofing treatment withCementconcrete1:2:4(1cement:2coarsesand:4 graded stone aggregate 20 mm nominal size) 34 PROVIDING WOODWORK INFRAMES OF FALSE CEILING, PARTITIONS ETC. SAWNAND PUT UP IN POSITION : SAL WOOD 35 PROVIDING AND FIXING KAIL WOOD CHAMFERRED EDGE WOODEN BEADING 65X12 MM WITH M.S.SCREWS ETC. 36 PROVIDINGAND FIXING GLASSSTRIPS INJOINTSOFTERRAZO/CEMENTCONCRETE FLOORS.40 MM WIDE AND 4 MM THICK 37 PROVIDING AND FIXING 500 LITRES CAPACITY SINTEX OR EQUIVALENT MAKE WATER TANK 38 PROVIDING AND FIXING CIMMERCIAL PLY WOOD 6 MM THICK AS PER DIRECTIONS OF ENGINEER IN-CHARGE 39 P&F Precoated G.I profile /Trapezoidal profile sheets 0.50 mm (0.05%)TCT zinc coating 120 grams per sqm, in 240mpa steel grade, 5-7 microns epoxy primer & polyster top coating 15-18 micron, self drilling/ tapping screws (5.5-8x55mm) 40 P/F precoated galvanised steel sheets roofing accessories 0.50 mm(+0.50%) thickness. Zinc coating 120 grams per sqm, 240 mpa steel grade5-7 microns epoxy primer and polyster top coat 15-18 microns .(A) Ridges plain(500-600 mm) 41 Providing and fixing in position inter locking pre cast cement concrete Blocks of M-15 Concrete Grade and minimum thickness 60 mm Including required ballu mitty below and in joints. 42 REMOVING & REFIXING OF OLD TOWER BOLTS (LABOUR RATES ONLY)
