Construction Of Ski Shop At Doodhpathri, Budgam.- 1 Site Clearance by employing labors. 2 Earth work in excavation in foundation trenches (not exceeding 1.5 mm width as well as 10 Sqm. in plan) including dressing of slides and ramming of bottoms, lift up to 1.50 m and disposal lead upto 1m. AlI kinds of Soil. 3 Providing and Laying of Stone Soling hand packed tightly in bed including leveling & ramming including a MT carriage of 10 Kms.(6 Thick) 4 P/L in position PCC of specified grade excluding the cost of centering and shuttering 1: 4: 8 cement: 4 coarse sand: 8 graded stone aggregate 20mm nominal size). 5 P/L in position RCC of specified grade excluding the cost of centering and shuttering (1: 1.5:3) 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size). 6 Providing, cutting, straightening, hooking, bending, placing and binding in position cold twisted reinforcement of TMT steel bars for RCC works or as temperature reinforcement wherever required as per approved drawings including binding wire as a complete job as per specification and as per instructions of Engineer-in-charge. 7 Cement concrete flooring 1:2: 4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm NS) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with Crushed Aggregate. 8 Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation and plinth in Cement mortar 1: 6 (1 cement: 6 coarse sand). 9 Providing 15mm thick cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand). 10 Providing 15mm thick cement plaster on ceiling side of single or half brick wall of mix 1:4 (1 cement :4 fine sand) 11 Providing and applying Pop/wall putty of2mmthickness over plastered surface to prepare the surface even and smooth complete minus tile quantity 130 sqm. 12 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade: Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. 13 Centering and shuttering including strutting, propping etc and removal of form for: Lintels, Beams, Foundation, Plinth beams, Girders, Bressumers and Cantilvers. 14 Providing and laying in position cement concrete of specified grade 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) excluding formwork. 15 River Bed/Sand matrix filling in plinth etc in layers not exceeding 20 cm in depth consolidating each layer by ramming, watering complete job. 16 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. Imported wood. 17 Providing 40 x 5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete blocks 30 x 10 x 15 cm. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). 18 P/F Ist Vitrified floor tiles in different sizes with water absorption less than 0.08% and confirming to I.S: 15622 of approved make in all colors, shades, laid on 201mm thick bed of cement mortar (1: 4) including grouting the joints with white cement mixed with pigment of matching shade complete. Size of tile 60 x 60 cm. 19 P/F Ist quality ceramic glazed tiles confirming to I. S: 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA etc. in all colours, shades except begundy, bottle green,black of any size as approved by Engineer -in charge in skirting, risers of steps and dados, laid on 12mm thick bed of cement mortar (1:3) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing the joints with white cement mixed with pigment of matching shade 19 complete. 20 Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete Popular wood. 21 Providing color coated track deck sheet roofing fixing with polymer coated J or L hooks bolts overlapping of sheets complete (up to a pitch of 60 degrees) excluding the cost of purlins rafters and trusses. 50mm thick (Including cost of valleys,ridges, hips etc. complete. 22 Providing fixing of anchor bolts 12mm dia 30omm long including cos tof all charges and fixing in positions complete job. 23 Providing and fixing paneling or paneling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick .First class kail wood. 24 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. 25 Providing and applying priming coat with ready nixed pink orgrey primer of approved brand and manufacture on wood work (Hard and Soft wood). 26 Providing and fixing Ornamental eaves boarding og Second class kailwood size 300 mm wide 40mm thick including. 27 Providing and fixing of wooden budloo plain lining/paneling tongued and grooved, including wooden plugs/ frame work/jambling work using budloo wooden 20mmthick soflit in square grid of 400*400mm size complete with necessary screws and priming coat on unexposed surface with all lifts leads and carriages. 28 28. P/F 18mm thick mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters facies & similar locations of required size of approved shade, colour & texture laid over 20mm thick base cement mortar 1:4 (1 cement :4 course sand) & joints treated with white cement, mixed with matching pigment, epoxy touch ups, incld. rubbing, curing moulding and polishing to edge to high gloss finish etc. complete at all levels, Granite black. (area of slab over 0.5 sqm). 29 Providing and fixing hardware items for doors, windows and ventilators ALUMINIUM FITTINGSS M.S. spring, tower bolts, latches. handles. Aldrops, door stoppers of approved quality and make as directed by ENGINEER IN CHARGE.a)Tower bolts 150 X 10 mm 30 Tower bolts 100 X 10 mm 31 Heavy Duty Aldrops 250x16 32 Aluminum Handles 125mm 33 Aluminum Hanging Door Stopper 34 Wind hook 150mm long 35 Wind hook 150mm long 36 Providing and fixing of 12mm ST 167 Toughened Glass with silicon sealant and framework and all allied items complete 37 Pointing on brick work with lime surkhi mortar 1:1 (1 lime putty: 1 surkhi) flush pointing including scaffolding charges and all carriages upto site of work complete. 38 Providing and fixing PPR pipes complete with fittings and clamps, including cutting and making good the walls etc.a) 25 mm dia 39 b) 40 mm dia 40 P/F PVC pipe heavy duty (Finolex or equivalent), Water or Vent pipes internal diameter with cowl And necessary nends, junction, inclusive of rubber washers, adhesives, complete joba) 110 mm Dia
