|
| 1 | Clearing jungle including uprooting of rank vegetations grass, bush, wood trees and saplings of grith upto 30 cm. Measured at a height of 1 metre above ground level & removal of rubbish upto a distance of 50 metres outside the periphery of area cleared. |
| 2 | Excavation in soil mixed with moorum/shingle/kankar requiring the use of special T&P such as pickaxes, subbals etc.including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. S.I no - 252 |
| 3 | Cement concrete with 4cmgauge approved stone ballast, approved coarse sand, cement in the proportion 8:4:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.PCC SI No.281 |
| 4 | R.C.C work with cement approved coarse sand and 2 cm. (3/4\") gauge approved stone ballast in the proportion of 1:1.5:3 in Footing excluding supply of reinforcement and its binding wire and including its fixing and binding the same with 24 B W.G.G.I. binding wire an including neccecary centering & shuttering etc & also including supply of all materials labour & T&P etc required for proper completion of the work. Binding wire cost being included in the item si no-287 |
| 5 | Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (Si. N0. 303) |
| 6 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in Plinth Beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost.SI NO. 285 |
| 7 | 2.5cm thick Damp proof coarse of cement consisting of concrete part cement 1½ part approved coarse sand and 3 parts approved 13 mm (1/2\") graded stone grit and including water proofing materials as ordered by the Engineer-in-charge in the proportion as specified by the manufacturer.SI No 361 DPC |
| 8 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in Slab, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost.SI NO. 284 (i) |
| 9 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Km (5 miles) from the side of work & including watering, dressing etc. Rate to include cost of all materials labour and tools & plants, etc. required for proper completion of the work.(Si.No.255) |
| 10 | 2.5 cm (1\") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2 cm (3/4\") graded approved stone laid in panels finished with 3 mm (1/8\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm (3\") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and stone ballast 4 cm. (1½\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No. 14.69 |
| 11 | Mild steel or iron work in plain work such as reinforced concrete/brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured.SI no. 504 |
| 12 | Supply and fixing of 100 mm dia AC down pipe comlete with roseheads bends ms claimps 2.5cm x 3mm fixed to walls by 15cm long 6mm dia male and including repair of plaster pointing etc if damaged during fixing of the pipe including cost of all material labour, tools and plant etc required for proper completion of work. si no-730 pg no-67 |
| 13 | 12 mm. thick.plaster wbut with cementmortar and approved coarse sandin 1:3 Labour for taking, washing and plastering minimum thicknessnot to be less than 3/8\" (10 mm) thick including supply of all material, labour and T&P etc. required for proper completion of the work. S.I no - 17.58 (I) |
| 14 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in Column, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost.SI No.289 |
| 15 | Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in super structure including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No. 303+309+310 |
| 16 | Class-150 brick work in 1:4 cement and fine sand of 1.25 fineness modulus mortar in super structure including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No. 305+309+310A |
| 17 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. SI no. 283(I) |
| 18 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in beam, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. SI no. 286 |
| 19 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in Slab, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost.SI no. 284(I) |
| 20 | Providing and fixing glass strips of 5.50 mm thickness in joints of floor and skirting at the time of laying floor, flush with floor level including labour, tools and plants etc. complete.(a) of 2.5 cmdepthSI No 630 |
| 21 | 2.5 cm (1\") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2 cm (3/4\") graded approved stone laid in panels finished with 3 mm (1/8\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm (3\") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and stone ballast 4 cm. (1½\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No. 14.69 |
| 22 | Supply of MS angle iron door, window or ventilator frame made of approved MS angle iron wrought to required from including drilling holes, welding and riveting where necessary and also including supply of all material, such as steel hinges of required size, nut and bolts etc and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work.New Item 2 of Mild Steel and Iron Work si no- New iteam-2 Pg. No. 52 |
| 23 | supply and fixing of 32 mm thick flush door shutterincluding fixing of wooden cleats and stopper and i adjustment of hinges bolts locks handles spring and other fitting fitting. S.I.No -470(1) Pg. No. 48 |
| 24 | Approximate cost of and oxidized Iron fittings with screws for doors and windows etc.S.I.No 472 pg. No. 47 |
| 25 | Supply of approved MS windows and M.S grill and ventilators excluding cost of glass panes but including supply of all materials, its fabrication nut and bolt, hold fast required labour and tools and plants for proper completion of work as per direction of Engineer-in-charge and also including cost of handles, stays etc and one coat of red oxide paint complete in all respect at site of work.si no-new iteam-3 |
| 26 | Fixing panes of 4 mm thick glass with and including Atul or equivalent ISI mark quality putty and brads and spring and including supply of all materials labour and tools & plants, etc. required for proper completion of the work but excluding cost of glass.SI No.812 (B) Pg. No. 68 |
| 27 | 12 mm thick plaster on brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.58(iii) |
| 28 | 15 mm thick plaster on brick work (rough surface)minimum thickness not less than 12 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.Si no-17.59(iii) |
| 29 | One priming coat and two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of work.SI No.649+650 |
| 30 | Finishing walls with water proof cement paint of approved makeand quality on new work with three coats to give an even shade including supply of all materials labour, tools and plants etc. required for proper completion of work.SI No.660+661 |
| 31 | White washing three coat including supply of all materials, labour and tools and plants etc. required for completion of the work. SI No.673 |
| 32 | Painting or varnishing new iron work in small areas or new wood work with one coat (up to one Sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950.SI No. 641+642 |
| 33 | 2 cm (3/4\") thick cement plaster in dado of skirting in 1:2 consisting of one part of cement and two parts of approved coarse sand laid in panels, finished with 3 mm 1/8\") floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No.597 |
| 34 | 12 mm. thick.plaster wbut with cementmortar and approved coarse sandin 1:3 Labour for taking, washing and plastering minimum thicknessnot to be less than 3/8\" (10 mm) thick including supply of all material, labour and T&P etc. required for proper completion of the work. S.I no - 17.58(i) |
| 35 | Supply of approved Z section windows and ventilators excluding cost of glass panes but including supply of all materials, its fabrication nut and bolt, hold fast required labour and tools and plants for proper completion of work as per direction of Engineer-in-charge and also including cost of handles, stays etc and one coat of red oxide paint complete in all respect at site of work. |
| 36 | Providing and fixing first quality white glazed Orissa pattern WC pan Hindustan, Cere make. earthen ware ISI marked WC pan size580 mm (Hindustan, Ceta make) with 10 cm HCI \"P\" trap of approved make including supply of all materials, labour, T&P etc. required for proper completion of work cutting and making goodfloors where required with cement sand and grit. The seat and trap shall have to be fixed over minimum 3\" thick cc in proportion of 12:6:1 including supply of all materials labour, T&P etc. complete. |
| 37 | Providing and fixing Ist quality European type white glazed earthen were ISI marked WC pan size 580 mm (Hindustan Cera make)including supply of all materials, labour, T&P etc. required for proper completion of workcutting and making good the floors where required with cement sand and grit. The seat and trap shall have to be fixed over minimum 3\" thick cc in proportion of 12:6:1 including supply of all materials labour, T&P etc. complete. |
| 38 | Supply and fixing 10 liters PVC low levelflushing cisternISI marked with fittings & brackets, 40 mm dia, CP flush pipe with fittings & clamp 20 mmdia overflow pipe with specials and mosquito proof couplings of approved municipal design, 15mm dia brass stop cock (400 gms) plastic connection (1.5\"x1\") with brass unionsincluding supply of all materials, labour, T&P etc. required for proper completion of work and painting of cistern and fittings with approved paint, cutting and making good the walls and floors where required with cement sand and grit and including water proofing materials as ordered by the Engineer-in-charge |
| 39 | Providing and fixing 600mm x 450mm beveled edge mirror of Atul, Kiron make glass with Indian polish 6.50mm thick complete with back of 600mm x 450mm x 6mm hard board sheet fixed to wooden cleats with CP brass screws and washers including supply of all materials, labour, T&P etc. required for proper completion of work. SI No 332 |
| 40 | Providing and fixing 550x400 mm wash hand basin white glazed earthen ware 1st quality ISI marked ( Hindustan, Neyeer, Ceramake ) with R.S. or C.I. brackets painted white , 15 mm diaC.P. brass pillar cock (wt. not less than 400 gms) including S/o all material labour T&P etc. fittings used should be of superior quality.(As per item no. 306) |
| 41 | S/F C.P. brass stop cock/ half turnheavy quality 15mm dia ISI marked including cutting and threadingas requiredS/o all material labour T&P etc. complate.stop cock of 400 gms(As per item no. 245) |
| 42 | Supply and fixing brass bib cock heavy quality 15 mm dia (400 gms) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work.Si no 239 |
| 43 | Providing and fixing STEEL SINK 600mm x 450mm x 250mmwith out drainage board sink of , Perry, Blue star, Eagle make Ist quality ISI marked with RS or CI brackets, CP brass chain with rubber plug 32 mm dia with necessary unions, 32mm CP brass waste complete with checknut, 32mm CP brass trap with necessary unions including supply of all materials, labour, T&P etc required for proper completion of work and including cutting and making good the walls where required with cement, sand of grit fittings used should be of superior quality. |
| 44 | Providing and fixing on wall face unplasticised 150 mm Rigid PVC Pipes or vent pipe conforming to IS : 13592 Type cap. 6.00 kg/cm2 ( Supreme, Kisan & Jain Make Rigid PVC Pipe ) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Incl bend, shoe & clamp incl. s/o all materials lab. and T&P etc. required for proper completion of the work The pipe shall either be fixed parallel to the walls, with MS clamps or laid in ground to proper slopes.Si no-New iteam-2 |
| 45 | S/F Nahani trap of approved heavy quality complete make PVC with CP brass grating Nahani trap laid over base CC 1:6:12includingS/o all material labour T&P etc. for proper completion of the work. |
| 46 | Providing and fixing on wall face unplasticised 75 mm Rigid PVC Pipes or vent pipe conforming to IS : 13592 Type cap. 6.00 kg/cm2 ( Supreme, Kisan & Jain Make Rigid PVC Pipe ) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Incl bend, shoe & clamp incl. s/o all materials lab. and T&P etc. required for proper completion of the work The pipe shall either be fixed parallel to the walls, with MS clamps or laid in ground to proper slopes. |
| 47 | Providing and layingB-Class (Jindal,JTC make)ISI marked G.I. pipe com. with GI specials such as bends, tee, socket,cross clamps etc.Earth work i/c filling the trenches etc required for proper completion of the work . the rate also i/c concealed GI fitting where required, cutting and making good the walls etc.and all material and lab. t&p complete. For Internal work. 15 mm(As per item no. 201) |
| 48 | As per item no 53 above but 20 mm(As per item no. 202) |
| 49 | Providing and layingB-Class (Jindal,JTC make)ISI marked G.I. pipe com. with GI specials such as bends, tee, socket,cross clamps etcetc required for proper completion of the work . the rate also i/c concealed GI fitting where required, cutting and making good the walls etc.and all material and lab. t&p complete For external work. 25 mm(As per item no. 208 A) |
| 50 | As per item no. 55 but 40 mm (As per item no. 209 A) |
| 51 | Providing and fixing full way brass gate valvewith wheel valve ISI marked heavy quality including supply of all material labour T&P etc. required for proper completion of the work. 15 mm (As per item no. 213) |
| 52 | As per item no. 57 but 20 mm (As per item no. 214) |
| 53 | As per item no. 57 but 25 mm (As per item no. 215) |
| 54 | Providing and fixing on wall face unplasticised 50 mm Rigid PVC Pipes or vent pipe conforming to IS : 13592 Type cap. 6.00 kg/cm2 ( Supreme, Kisan & Jain Make Rigid PVC Pipe ) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Incl bend, shoe & clamp incl. s/o all materials lab. and T&P etc. required for proper completion of the work The pipe shall either be fixed parallel to the walls, with MS clamps or laid in ground to proper slopes. |
| 55 | Providing and fixing PVC bend 100 mm heavy quality of required degree with access door incretion rubber washer, bolts, nuts complete including supply of all materials, labour T&P etc. required for proper completion of the work |
| 56 | Supply and fixingC.P brass shawer heavy quality 100 mm dia capted including C.P brass stop cock 15 mm dia including supply of all material , labourT &p also including cutting threading the pipe required for proper completion of work S.I no 242 |
| 57 | Providing and fixing 750mm x 10mm size C.P brass towel rail of approved quality (including brackets0 with a pair ofC.P brass brackets fixed on the wall on wodden cleats with C.P brass screws including supply of all material , labourT &p also including cutting threading the pipe required for proper completion of work SI no -334 |
| 58 | Providing and fixing soap dishcromoem plates with brackets fixed to wodden cleates with brass screws including supply of all material labourT &P etc required for proper completion of work S.I no -336 |
| 59 | P/F of Submersible pump I/C supply of approved quality Motor of 2 HP I.S.I mark and boaring Casing Dia of 125 mm with Starter panel, cable and necessarily all fittings comp with labour T&P etc required for proper completion of work as per direction of Engineer E/I . |
| 60 | Supply and fixing the water tank sintex/victus/cera/hindustan make complete including all fitting . |
| 61 | Excavation in soil mixed with moorum/shingle/kankar requiring the use of special T&P such as pickaxes, subbals etc.including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. S.I no - 252 |
| 62 | Cement concrete with 4cmgauge approved stone ballast, approved coarse sand, cement in the proportion 8:4:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.PCC SI No.281 |
| 63 | Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (Si. N0. 303) |
| 64 | 12 mm. thick.plaster wbut with cementmortar and approved coarse sandin 1:3 Labour for taking, washing and plastering minimum thicknessnot to be less than 3/8\" (10 mm) thick including supply of all material, labour and T&P etc. required for proper completion of the work. S.I no - 583 |
| 65 | Supply and filling of brick batsin soak pit tank including supply of all material, labour and T&P etc. required for proper completion of the work, As per direction of engineer in charge . |
| 66 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in Slab, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. |
| 67 | Mild steel or iron work in plain work such as reinforced concrete/brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured. |
| 68 | electrification @ 12.5%- |
