|
| 1 | Takiing down chowkat (with shutter without taking off shutter from the frame) exc 1.5 Sqm n.exc 4 Sqm each, complete all as specified and directed. |
| 2 | Takiing down chowkat (with shutter without taking off shutter from the frame) n.exc 1.5 Sqm each, complete all as specified and directed. |
| 3 | Taking down shutter of any description area exc 1.00 sqm but not exc 2.00 sqm, complete all as specified and directed. |
| 4 | S&F for 125 x 60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 5 | S&F for 105 x 60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 6 | M&L for PCC (1:2:4) type B-0,(using 12.5mm graded crushed stone aggregate) as in filling of door frame etc, complete all as specified and directed. |
| 7 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 8 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, complete all as specified and directed. |
| 9 | S&F factory made solid PVC door shutter 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. |
| 10 | S&F 35mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass gauge etc divided into suqares with plain chamfered or rounded, mittered edges of framing plain, chamfered or rounded in window/ventilator, complete all as specified and directed. |
| 11 | S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 12 | M&L preparation of new or previously untreated wooden surface any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed. |
| 13 | S&F powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows / ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc., complete all as directed and specified. |
| 14 | S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber, neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as directed and specified.(Note:- Glass/ other filling material in panels shall be measured and paid separately) |
| 15 | S&F powder coated anodised aluminium door shutters, side hung, without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber, neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws anodised aluminium fittings such as peg stays 150mm long (1 No.). hings type B-21 of 100cm long (2 No.), suitable aluminium handle (1 No.), complete all as directed and specified. |
| 16 | S&F 4.8mm thick, plain sheet glass of any colour and glazing with and including anodised aluminium snap beading or rubber/reopen bead, fixed in aluminium frame or door frame, complete all as directed and specified. |
| 17 | S&F floor door stopper, 150mm long of aluminiurn alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 18 | S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type, on both sides, complete all as specified and directed. |
| 19 | S&F in repair 2nd class hard wood 15mm thick boarding clan sawn with butt joints fixed with nails in any situation as shelves of built-in cupboards, including replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc, complete all as specified and directed. |
| 20 | Taking down shutter of any description area exc. 1.00 Sqm but not exc. 2.00 Sqm and refixing in the same opening, complete all as specified and directed. |
| 21 | S&F 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 22 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 23 | S&F 200mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 24 | S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 25 | S&F 150mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed. |
| 26 | S&F 125mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed. |
| 27 | S&F mild steel flat as in hold fast, wall ties, plain angle, clean for securing purline to wood trusses, conforming to Fe 290 Gde E-165, complete all as specified and directed. |
| 28 | M & L for PCC (1:3: 6) type C1 (using 20mm graded crushed stone aggregate) as in hold fast blocks, complete all as specified and directed. |
| 29 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 30 | S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate of mild steel, complete all as specified and directed. |
| 31 | S&F in repair 100mm hasp & staple, safety type, aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 32 | S & F in repair continuous (piano) hinges,mild steel, width of flap 30mm (when open) bright finish or electrogalvanised, complete all as specified and directed. |
| 33 | S&F in repair ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 34 | S&F in repair door closer (extruded section) hydraulically regulated, aluminium (die cast) body designation No 1, universal type, suitable for door shutters up to 1000mm in width and of weight not more than 61 to 80 Kg, complete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 36 | S&F mild steel window with side hung shutter factory made including box type hinges with steel handle and steel peg stay, confirming to IS, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 37 | S&F steel ventilator with top hung shutter, factory made confirming to IS, including hinges, steel peg stay, complete all as specified and as directed. |
| 38 | M&L for preparation of new steel or iron surfaces of any description n. exc. 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed. |
| 39 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed. |
| 40 | M&L for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane, complete all as specified and directed. |
| 41 | M&L for sheet glass, 4mm thick, ordinary quality and glazing with oil putty in sqaren. exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 42 | Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, complete all as specified and directed. |
| 43 | M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 44 | M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4),mixed with water proofing compound on top layer as per manufacturer\"s instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately) |
| 45 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. |
| 46 | M&L for preparing newly plastered surfaces of walls etc and applying two coats of distemper oil emulsion over a coat of chalk whitening primer, complete all as specified and directed. |
| 47 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 48 | S&F of coloured PVC designer modular wall cladding 5 to 6mm thick with air gap between installed with U shapped GI channel with end joints on edges (designed colour patterns as per directed by GE). The frame work shall be fixed to wall using aluminium screws including dismantling of old unserviceable old wall cladding, complete all as specified and directed. |
| 49 | M&L for 4mm thick pre-painted E-fibre board, designer/decorative,fixed or laid/inserted to GI snap grid frame size 605mm x 605mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed. |
| 50 | M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including concealed, rigid PVC conduit (ISI marked) not less than 20mm dia, medium grade, including all conduit accessories with and including concealed modular metal box of suitable size for mounting modular switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting& making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole including taking down old unserviceable point wiring, complete all as specified and directed. |
| 51 | All as per item No 50.00 here-in before but one 3 pin 5 Amps socket outlet on the same board controlled by other swtich, complete all as specified and directed. |
| 52 | All as per item No 50.00 here-in before but one 3 pin 5 Ampssocket outlet on independent board controlled by other switch, complete all as specified and directed. |
| 53 | All as per item No 50.00 here-in before but one bell/buzzer on the same board controlled by other swtich or independent, complete all as specified and directed. |
| 54 | All as per item No 50.00 here-in before but with 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLSH type for one 15 Amp 3 pin / 5 pin socket outlet point including PVC insulated 4.0 Sqmm FRLSHtype copper multi stranded conductor as earth wire, complete all as specified and directed. |
| 55 | S&F in repair switch piano flush button single pole, one way 6 amps 240 volts, complete all as specified and directed. |
| 56 | S&F in repair socket outlet 2 in 1, 3 pin 6 Amp, flush type, complete all as specified and directed. |
| 57 | S&F in repair switch and socket combination2 in 1, 3 pin 6Ampflush type, complete all as specified and directed. |
| 58 | S&F in repair switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed. |
| 59 | S&F in repair ceiling rose, surface bakelite PVC/ polycarbonate, isolated body with three terminals, complete all as specified and directed. |
| 60 | S & F in repair angle lamp holder, PVC/polycarbonate type, complete all as specified and directed. |
| 61 | S&F in repair stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan, complete all as specified and directed. |
| 62 | S&F in repair bell push, flush type 5 Amp, complete all as specified and directed. |
| 63 | S&F in repair bell electric, heavy duty, ding dong type, 240 volt, single pole, complete all as specified and directed. |
| 64 | M&L for sub main wiring with two run of 4 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable (FRLSH) 1100 Volt grade, drawn through and including PVC conduit not less than 25mm size (ISI marked) including all accessories and one run of4 Sqmm single core PVC insulated unsheathed (FRLSH) copper earth continuity conductor including taking down old unserviceable sub main wiring, complete all as specified and directed.(Note : Two runs of4 Sqmm single core cable with one run of earth continuity conductor including PVC casing caping and its accessories shall be measured and paid as one length). |
| 65 | All as per item No 64.00 here-in before but for PVC casing/caping(ISI marked), complete all as specified and directed. |
| 66 | S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection & IK 09, 240 volts, 4 way, as per IEC 61439-3 with necessary lugs for incomming and outgong connections, fixed on wall,single pole andneutral, with 200 Amps rated busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any rating, complete all as specified and directed. |
| 67 | All as per item No 66.00 here-in before but 8 way, complete all as specified and directed. |
| 68 | S&F in repair MCB Single Pole & Neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, as per IS/IEC 60898-1, fixedin proper position, complete all as specified and directed. |
| 69 | S&F in repair MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, as per IS/IEC 60898-1, fixedin proper position, complete all as specified and directed. |
| 70 | S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, ACwith driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed. |
| 71 | S & F wall mounted inverter LED batten light fitting 1 x 20 Watt, 4 feet long, 220V, ACwith driver and backup time upto 4 hours including 20 W LED 6500K lamp, protection class not less than IP 20, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed. |
| 72 | S&F in replacement inverter LED bulb 12 Watt 6500K and backup time upto 4 hours, protection class not less than IP 20, insulated body, suitable for B-22 base, complete all as specified and directed. |
| 73 | S&F BLDC ceiling fan 1320mm sweep, remote controlled with AAA batterry (02 Nos), underlight, 4 blade with multiple modes, motor power input 40W, air delivery 245 cum/min, 5 speed device RF remote with timer, dimensions 26.5D x 21.5W x 21.5H (in CM) including all fixing materials connecting upto ceiling rose with suitable copper wire, complete all as specified and directed. |
| 74 | S&F surface/suspended/recessed mounted 600mm x 600mm LED panel light type decorative fittings 42 watt, 220 V, AC, including LED tube lightconnecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 75 | S&F recessed mounted LED panel light round type decorative fittings 12/15 watt, 220 V AC, including electronic driver and connecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 76 | S&F in replacement recessed mounted LED light fittings 36 watt (size 4\" x1\"), white/warm white colour (4500 K to 6500 K) ultra modern LED edgelit luminaire suitable for armstrong/grip/POP ceiling complete with seperate electronic driver and high brightess LED including LED lamp and connecting up with three core 2.5 Sqmm upto nearest point, complete all as specified and directed. |
| 77 | M&L for modular switches 1 way 10 Amp, 1 module, absolute white colour and making good to the distrubed srfaces including taking down existing switch, complete all as specified and directed. |
| 78 | M&L for modular switches 1 way 20 Amp, 1 module, absolute white colour and making good to the distrubed srfaces including taking down existing switch, complete all as specified and directed. |
| 79 | M&L for modular bell push 6 Amp, 1 module, absolute white colour and making good to the distrubed srfaces including taking down existing switch, complete all as specified and directed. |
| 80 | M&L for modular socket 6 Amp/10 Amp, 2/3 pin, combined with safety shutter, 2 module, absolute white colour and making good to the distrubed srfaces including taking down existing switch, complete all as specified and directed. |
| 81 | M&L for modular universal socket 6 Amp/16 Amp, 2/3 pin, combined with safety shutter, 2 module, absolute white colour and making good to the distrubed srfaces including taking down existing switch, complete all as specified and directed. |
| 82 | M&L for modular stepped type electronic fan regulator/dimmer 120 w, 5 step, 2 module, AC 230 volt, absolute white colour and making good to the distrubed srfaces including taking down existing switch, complete all as specified and directed. |
| 83 | M & L modular cover plate with inner frame 3 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed. |
| 84 | M & L modular cover plate with inner frame 4 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed. |
| 85 | M & L modular cover plate with inner frame 6 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed. |
| 86 | M & L modular cover plate with inner frame 8 module, snow white colour including taking down existing cover plate carefully and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed. |
| 87 | Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole, or cable trenches etc. n. exc. 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 88 | Removing of excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed. |
| 89 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate), as in coping of pole, etc. including necessary form work, complete all as specified and directed. |
| 90 | M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), as in pole foundation, filling and mass concrete etc. including necessary form work, complete all as specified and directed. |
| 91 | Supply and fixing LED Solar street light fitting 40 Watt including galvanized steel pole (height 6m) in built, lithium ferro phosphate battery (12.8 V, 24ah) with in built BMS tech, solar panel (80 WP @ STC). MPPT solar charge controller & alum extruded body with automatic control of dimming and brightness of light, operating temp upto 50 degree, avarage life 50000 hours, high efficiency long life LED module with SMD LED package mounted MCPCB, lumen efficiency LED>190 lm/W mounting suitable for side entry pole mounting with brackets arm OD 76mm maximum, complete all as specified and directed.Note :Earth work and PCC shall be measured separately. |
| 92 | Note: An amount of Rs.32,537.00 on account of Credit Schedule for schedule \"A\" part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
| 93 | Supply and fixing energy efficient ‘LED Flood Light120 W LED luminairewith Aluminium dia cast housing, toughened glass cover with IP 66 protection, CCT 5700 K including fixing arrangment on wall/pole / surface and connecting cable up to nearest ceilign rose into flexible PVC conduit. Make : Crompton/Havells/ Surya/Philips |
