Conservation and repairs to CHINTAMANI TEMPLE, AT: THEUR , Tal:HAVELI , Dist : PUNE- 1 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 2 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete 3 Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. 4 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 5 Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete 6 Removal of damaged wood from structural members : Removal of damaged wood from structural members like column, beams, joists, battens etc. and stacking the same/handing over to the client, provide necessary propping (as required) & inclusive of scaffolding etc., complete. 7 Dismantling brick masonry in lime or cement mortar and stacking the materils asdirected with all leads, lifts etc. 8 Removing G.I. or A.C. sheet roofing including purlines, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. 9 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. 10 Removing the tiles, battens and dungry cloth purlins, rafters and ridges etc. from roof,sorting out the serviceable and unserviceable materials and stacking the same as andwhere directed in the compound, scaffolding etc. complete. 11 Removing brick bat coba including stacking the spoils as directed with all leads,lifts etc, complete. 12 Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete 13 Providing and applying a Silicon Base Water Repellent Stone Sealers ,on Brick/ Stonemasonry /Concrete surfaces in Two coats by spraying. Including cleaning/ sand blasting for removing dirt/cement mortar patches etc. by force water jet,wire brushing etc.complete. 14 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). Bd.R.5, Page One 15 Galvanised iron sheet 1 mm (20 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth upto 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3 mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed.). 16 Providingandfixing (6 inch x 1/2 inch x 120 inch)thickTeakWoodPlanking,asperdetailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joistbelow,to break joint withone another and tobe rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunk and the exposed surface of boards then planed quite smooth, etc. complete. 17 Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete. 18 Providing and fixing stone flooring, First Sort in lime mortar 1:1, with size of stone (0.60 x 0.45)m, and 0.15m thickness as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stonestobelaidwithjointsnotexceeding 6mm.(¼″)thick andtobe evenlyandfirmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all pavingwork when handed over to be perfectly clean and free from all mortar stains etc. complete. 19 Providing and fixing stone flooring, First Sort in lime mortar 1:1, with size of stone (0.45 x 0.60)m, and 0.15m thickness as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stonestobelaidwithjointsnotexceeding 6mm.(¼″)thick andtobe evenlyandfirmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all pavingwork when handed over to be perfectly clean and free from all mortar stains etc. complete. 20 Providing Block In Course Stone Steps of trap / granite stones in lime mortar 1:1½with size of stone 45cm. x 30cm. x 23cm. as per detailed specifications and drawings or as directed the stones be of approved quality, colour, hard and free from defect of any kind, the stones shall be of exact size and shape, the shall be rough-tooled on exposed surface, holes for balusters should be cut in the steps before they are laid, each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering andall steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. 21 Stucco work in lime, surkhi and sand (1:1:1) as per traditional practices and design, the mortar should be prepared by grinding mill only. The thickness varies from 10mm to 100mm as per design 22 Providing and laying cast iron pipes of B class of 100mm diameter with sockets and spigot ends/ flanges and cast centrifugally/vertically including specials, laying pipes and back filling the trench complete including excavation. 23 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means 24 Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m) By Manual Means 25 Providing dry /trap/ granite /quartzite /gneiss rubble stone soling 15 cm to20 cm thick including hand packing and compacting etc. complete. 26 Providing and laying Castinsitu/ReadyMix cement concrete in M15 of trap/granite/quartzite/gneiss metal for foundation and bedding/steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc.complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laidco ncrete shall be covered by gunny bag, plastic, tarpaulin etc.(Woodencenteringwillnotbeallowed.),with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 27 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery upto destination hoisting and fixing of accessories such as inlet, outlet over flow pipe inclusive of all tank s capacity between 200 to 1000 liters 28 Providing Brick Masonry Second Class in superstructure with size of brick 9″ x 4½″ x 2½″ in lime mortar 1:1½, as per detailed specifications and drawings or as directed including the bricks to be of uniform size, moulded ground, thoroughly well burnt and sound, ringing clearly when stuck with trowel, the bricks to be soaked in water for 12 hours before used, the bricks are to be laid flush in mortar in suchbond as directed, as far as possible, bricks of uniform colour are to be selected for the face work when it is not to be plastered, the joints are not to exceed12.5 mm. (½″), no bats or halfbricktobeused inthework,rackingoutjointswherepointingorplasteringto bedone, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 29 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 with for Deepmal Octagonal / Circular / trapezoidal in shape as per the site requirement of size of stone ranging from[ 0.80 x 0.75 x 0.30 Meter] in superstructure (deeepmal )as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind,dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″)in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 30 Providing Un-coursed Rubble Masonry of trap / granite stones in lime mortar 1:1½, in foundation and plinth as per detailed specifications and drawings or as directed including the stones to be set in the work as received from the quarry, after merely knocking offweak corners and edges with the masons hammer,the stones shall be carefully laid so as to break joints, no joint shall exceed 12.5 mm. (½″) in thickness, every stone shall be set flush in mortar, the face stone shall be for greater size, and good beds, one through stone shall be inserted at least every 0.80 sq. mete (1 square yard), the joints shall be racked out carefully at least 25 mm. (1″) where pointing or plastering tobe done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, bailing out water, watering and all exposed masonry work when handed over to be perfectly cleanand free from all mortar stains etc. complete. 31 ProvidingLimePointingto Stoneworkinlimemortar1:1insuperstructure,asperdetailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall beraisedorflatasmaydirected,preparingthelimemortarwith640grampulpofwoodapple (Belfruit) per cubic metre of lime mortar as a bonding material, scaffolding, watering and allwork when handed over to be perfectly clean and free from all mortar stains etc. complete. 32 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfastof size 300mm x 40mm x 5mm with oil painting, etc. complete 33 Providing and fixing Teak Wood Panelled Door First Class(1.20 m. x 2.10 m.) with frame 100 mm.x125mmsectionandfullypanelledshuttersdoubleleafasperdetailedspecificationsand drawings or as directed including the best quality and well-seasoned Moulmein teak, to be properly framed and mortised together, the head and stillsbeing provided with horns 15 cm long, all parts set in masonry to be well coated with boiling coal tar, the styles, top, bottom, lock and frieze rails 38 mm(1½″)thickwith fittedmoulding orasspecified,thepanels 32mm(1¼″)thicktoberaised, feather-tongued in to styles and rails with beaded edges on both sides, each leaf to be hung with 3 brass butt hinges 125 mm. with brass screws, furnished with pair of aldrops 16mm. diameter & 300 mm.length,pairofpatenthandles150mm.,pairoftower bolts 10mm.dia.&250mm.length, towerbolt10mm.dia.&200mm.length,andpairofhooks&eyes200mm.allofbrassetc. complete. 34 Providing and fixing Mangalore tiled roofing with class AA tiles including securing the last course of tiles near the eaves with steel flat 40mm x 3mm and 1.22 mm wire fixing 50mm x 25 mm horizontal teak wood battens and irons works and oiling the battens etc. complete. (Excluding ridge and hip tiles). 35 Providingandlayingcastinsitu1:1:4LimeConcreteofbrokenbrickmetalforcopingor waterproofingasperdetailedspecificationsanddrawingsorasdirectedincludingcentring, formwork,laying/pumping,compacting,rougheningthemifspecialfinishistobeprovided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing withcoursedaggregateorsurkhi indrummixer,theconcretemustbebittenfortwodayswith pouring water as per specifications,scaffolding, wateringand all concrete work when handed overto be perfectly clean and free from all mortar stains, etc. complet 36 Providing/Re-setting Stone Paving,First Sort ofreuse-stones in lime mortar 1:1, as per detailed specifications and drawings or as directed including the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, preparing the lime mortar in lime miller, watering and all paving workwhen handed over to be perfectly clean and free from all mortar stains etc. complete. 37 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) 38 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 39 Teakwood for COMPLEX CARVING : Providing and fixing Ist quality (Superior Quality- Berma) Teakwood for COMPLEX CARVING like decorative arches, decorative columns,decorative design structural members like beams,columns,joist,rafters,purlins,purlin cleats,hip rafters, jack rafters, ridges, wall plates, post plates and posts, pedestals or any other wooden members etc. including removing damage/decayed wood members,fixing stainless steel screws, cutting, sawing,making proper wood jonery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete For wood size = 6 x 7 to 6 x 8 40 Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone size (0.35* 0.35*0.35) M. in plinth (Talkhada) as perdetailed specifications and drawings or as directed includingthe stones be of approved quality, colour, hard and free from defect of any kind, dressing everystones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curvesor twists if required, the stones shall be set in fine mortar, the beds or joints being in no case morethan 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in heightaveraging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the limemortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 41 ProvidingandfixingTeak wood Eaves Board 15cm.(6″)wide and25mm.(1)thick, asper detailed specifications and drawings or as directed including the planks to be best Moulmein teak to be 25 mm. (1) thick and 15 cm.(6″) in width, of a uniform colour and planed, the planks to be laid truly parallel to the floor so as to cover the end rows of the tiling and to be fixed with screws of the proper length driven countersunk, all joints to be neat and close, scaffoldingetc. complete. (It is mandatory to use first quality well seasoned Indian teak wood from forest departments FDCML) 42 Rubberwood Signage : Providing and Fixing Signage on 24 MM thick Rubberwood as per the given size and design, (with edge moulding as per given design made within the cross - section thickness of the wood plank), by engraving or etching guided by a laser machine. The cost includes, cutting the base panel to required size and shape, forming the given design (including lettering of given height and surrounding floral or geometric design) and filling it with 2 coats of black or rust - brown oil paint, finishing the entire panel with Touchwood or equivalent brushable clear wood finish and two coats of lacquer, packaging, transportation to site, fixing at the given location on stone or brick wall with S.S. Screws, all taxes, lead, lifts etc, complete. As shown in drawing, specification: As Directed by Engineer In Charge. (Name board Signage) 43 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 Kilogram with lid and frame fixed in cement concrete. 44 Providing and laying concrete pipes of I.S.NP. Class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. 45 Providing and fixing white european type wall-hung pan, of size 350 mm x 355 mm x 570 mm concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe,vent pipe upto the outside face of wall,100mm dia C.I.plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete. 46 Providing and laying in trenches 32mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete. 47 Providing and laying in trenches 40 mm dai. CPVC pipe including necessary excavation, fittings.Refilling trenches etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 48 Providing and laying in trenches 50 mm dai. CPVC pipe including necessary excavation, fittings.Refilling trenches etc. complete.Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 49 Providing and fixing Ist quality (Superior Quality- forest development rate) Indian Teakwood in structural members likeBeams, columns, joist, rafters, purlins,battens,purlin cleats, hiprafters, jack rafters, ridges,wall plates,post plates and post, pedestals or any other wooden menbers etc,including removing damage or decayed wood members, fixing stainless steel screws, cutting, sawing, making proper wood joinery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete (It is mandatory to use 1st quality well seasoned teak wood from forest departments FDCML) 50 Refixing existing wood member: Refixing existing wood member like joist,girders, battens, beams,rafters,frame work of false ceilling,trusses,and purlins and all other wood works including fixing stainless steel screws ,cleaning and surface dressing or sawing ,making proper wood joinary, scaffolding, proping by steel props as directed by engineer incharge etc completed 51 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. 52 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand facedtreatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking outgrains and curing for fourteen days scaffolding etc.complete 53 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. 54 Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint in cluding scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. 55 Providing12 mm. thick Rough Cast Lime Plaster in single coat in lime mortar 1½:1 in plinth, as perdetailedspecificationsanddrawingsorasdirectedincludingalljointsinmasonryandbrick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water andthoroughlywettedforsixhoursbeforeplastering,theplastertobeappliedinanevenand uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 jaggary and 640grampulpofwoodapple(Belfruit)in90to135litreofwater,theplasterbeingwetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendi or tag ) per cubic metre of lime mortar as a bonding material, of lime as a bonding material, watering and allwork when handed over to be perfectly clean and free from all mortar stains etc. complete. 56 Providing 10mm.thick RoughCastLimePlasterinsinglecoatinlimemortar1:1in superstructure,asperdetailedspecificationsanddrawingsorasdirectedincludingalljointsin masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even anduniformcoat wellpressedintothe jointsandto bewellbeatenfor1½dayswithhand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kgJaggaryand640grampulpofwoodapple(Belfruit)in90to135litreofwater,theplaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendiorjute)percubicmetreoflimemortarasabondingmaterial,oflimeasabonding material, scaffolding, watering and all work when handed over to be perfectly clean and free fromall mortar stains etc. complete. 57 ProvidingFineCoatOf Limeover roughcastplasterinsuperstructure,asperdetailed specifications and drawings or as directed including the finishing coat is to be applied over rough castplasterandwell-polishedwithtrowel,preparingthelimemortar,scaffoldingandwatering complete. 58 Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone (0.6 x 0.40 x 0.50)M. cm. (Wall stone) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 59 Providing and applying integral fine coat, with addition of coloured pigments, as paint to the plain lime stucco plaster, in two layers, including scaffolding, curing, all leads and lifts etc. complete. 1) The 1st coat to be laid is a mixture of fine lime and white - washing lime in 2 : 1 proportion, made smooth with wooden rubbers, and very lightly beaten. The finishing coat, consisting of fine lime and white - washing lime, mixed with the appropriate pigment in 1 : 2 : 1 proportion is to be applied and well - polished with trowels. 60 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) 61 Providing and applying melamine polish of required finish to the wood work byspray machine including knotting and preparing the even surface by scraping,applying French polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary. 62 Providing second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar1:6 in foundation s and plinth of inner walls/in plinth external wall s including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 63 Conveying the excavated material, debris of brick or stone masonry, RCC, slab, waterproofing, stone members/ materials, cement/ lime concrete, tiles/marbles/ stone slab/ brick bat coba, etc, upto 5 km, away from the site and cleaning the site properly. 64 Basalt stone for wall 15 cm thick : Providing and fixing Basalt stone for wall 15 cm thick( Two line dressed stone of size 0.45x0.30x0.125 to 0.15 and not less than 0.30x0.30x0.15 Mtr, cut in shape and two adjacent sides to be dressed, from, Dist Ahmednagar) in 1:1 lime mortar in super structure including striking joints and watering complete to the entire satisfaction of the architect (Ashlar Masonary in tichiv style ) 65 Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete 66 Providing and laying insitu/ readymix M-30 controlled reinforced cement concrete of trapmetal for raft slab includingVhaunches,formwork,scaffolding,compactionbyvibrating,finishingcuringetc.complete.concrete batch mixplant /pan mixer with fine agreegates of required specifications (VSI sand finely washed etc) etc.complete.(excluding reinforcement). a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer). 67 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as perrequirement of site, madewith 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution ofwork of cleaning and/or pointing and/ or applyingchemical and removing it thereafter. The scaffolding system shallbestiffenedwithbracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc.,complete as per directions and approval of Engineer-in-charge. Note:-(1) The elevational area of the scaffolding shall be measured for payment purpose. (2)The payment will be made once only for execution of all items for such works 68 ProvidingSoil Bag Support to the monument with contractor´ssoil in proper layers carefully as directed by Engineer in-charge including filling, tying and conveying the bags,removing the soil bags after work up to a distance of 50 meter beyond the monument area and cleaning the siteetc. 69 Video Documentation for conservation work 70 Providing 10-12 min documentary film
