|
| 1 | BOQ |
| 2 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in P/L beam SI.No. 283(a) |
| 3 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in P/L beam SI.No. 289 |
| 4 | First class Brickwork in 1:4 cement and coarse sand mortar in Super Structureincluding supply of all materials Labour T&P etc. required for proper completion of work as per SI.No. 305+3.9+310 |
| 5 | First class Brickwork in 1:6 cement and coarse sand mortar in Super Structureincluding supply of all materials Labour T&P etc. required for proper completion of work as per SI.No. 305+3.9+310 |
| 6 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3but in T beam SI.No. 286 |
| 7 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in Slab SI.No. 284(a) |
| 8 | Mild Steel or iron work in plane work such as reinforced concrete for reinforced brickwork (when not included in an over all rates) wrought to required shape as necessary includeing bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks SI.No 504 |
| 9 | Mild steel or iron work of small size and section such as fabrication of door and window frame including cost of hinges as per SI.No. 502(b) |
| 10 | 12 mm cement plater in 1:4 with cement amd coarse sand mortar over brick workminium thickness not less then 10 mm thick including all As per SI.NO.584(I) |
| 11 | Providing and laying \"Brick Coba\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm. x 30 cm. and side wall parapet shall be mono tythic plaster wall upto 30 cm. higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc. complete for proper completion of work.( s.no ch 11 of new item -1) |
| 12 | Concrete with 4 cm gauge brick ballast, fine sand and cement in proportion of 8:4:1 in foundation including supply of all materials labour and T& P etc required for proper completion of the work.( S.I.No. 275) |
| 13 | Cement Concrete with 2cm gauge approved stone ballast, coarse sand & cement in proportion of 4:2:1 including supply of all materials labour T&P comp SI.No. 279(I) |
| 14 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.dsr 13.26 |
| 15 | P/Lof Vctrified floor tiels in different sizes (thickness to be specified by the manufacturer ) with water absorption\"s less than 0.8% and conforming to IS:15622 of approved make in all colours and shades ,laid on 20m.m thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc.,complete As per S.NO. Chp.14 D.S.R 11.41 |
| 16 | S/F 6mm china white glazed tile in flooring or skirting dado with 1:3 cement & coarse sand mortar finished with white cement slurry joining and polishing complete all materiall T&P as per SI.No. 628 |
| 17 | S/F of Hexagonal fan box with 1.00 MM Thick sides of fabrication from 16 SWG M.S. Sheet SI.No. 1149 |
| 18 | Two coat painting over 1 coat primer including lab T&P all comp SI.No. CH 15 New Item 1+2+4(ii) |
| 19 | Three coat with oil bound distemper over one coat primer including all complete SI.No. 649+650 |
| 20 | Finishing of walls withacrylic smooth paint of required shadeover new work include base coat of water proffing cement paint i/c all material ,labour andT&P as per S.I. 13.46.1 |
| 21 | S/F of 10 cm internal dia A.C. down pipe complete with bends including supply of M.S. Clamp 2.5 cm X 3 mm fixed to wall & 15 cm Long wall Incl. T&P all comp. SI.No 730 |
| 22 | S/F of Informativesign of 1.20 X 0.90 mtrs in size made from granite driected br Er. Incharge also fixing in Proper position comp. at site |
| 23 | Wiring point for light 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, inside the conduit using moduler board & moduler switch complete.a) Light Points (131C-187A) |
| 24 | b) Fan Points(133C-187A) |
| 25 | c) 5 Amp Plug (134C187-C) |
| 26 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A 250 volt flush type universal modular socket switch on concealed MS box including supply of all material. labour T&P etc. required for proper completion of work. (1139) |
| 27 | S/F surface/flush mounting spn distrbution board without mcb item no 1022(a) cate A |
| 28 | S&F of 6 Amp to 32 Amp. SPMCB (1002,CAT B) |
| 29 | Supply and fixing of electronic fan regulator Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work (1203C) |
| 30 | Supply and fixing of LED Tube Light butten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect (1413A CAT AAA) |
| 31 | Basic Price for 1200 mm sweep BLOC Ceiling fan i/c all accessories/fittings/ supports etc. DSR 4400 |
| 32 | Instaling, Testingand commissioning of ceiling fan, including the down roads of standard length with1.5 mm FRLS PVC insulate copper condutor single core cable including and providing fixing phenolic laminated sheet cover on the fan box etc.DSR 1.45 |
| 33 | SF of PVC Pipe 100mm dia including all complete.Chapter-1 item N0 24 |
| 34 | SF of PVC bend 100 mm dia including all complete DSR Item N0 |
| 35 | Providing and placing on tarees polithene water storage tank as per DSR 18.48. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.--Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes DSR 18.8.1 |
| 37 | 20mm nominal dia Pipes DSR 18.8.2 |
| 38 | PF of white vetreous china Orissa pattern w.c pan of size 580x440 mm & foot rest intrigal type complete of work as per DSR 17.1.1. |
| 39 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 dsr 18.53.1 |
| 40 | PF of white vetreous china Flat back wash Basin of size 630X450 mm complete of workas per DSR 17.25.1 |
| 41 | PE of CP. hrass bib cock of 15mm dia nominal bore........ including all complete of work as per DSR 18.49 1 |
| 42 | PF of CP brass long body bib cock of 15mm dia nominal bore........ including all complete of work as per DSR 18.51.1. |
| 43 | PEof CP brass Stop cock of 15mm dia nominal bore... including all complew of work as per DSR 18.52.1. |
