|
| 1 | SITE LEVELLING |
| 2 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 3 | Providing and laying hand packed stone soling in building works with clean hard selected stones all complete. |
| 4 | Providing & Layingin position cement concrete of 1:2:4 mix.(1 cement, 2coarse sand, 4 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete. |
| 5 | Providing & laying Plum concrete in 1 : 2 :4c.c. (1 cement, 2 clean coarse sand, 4 clean hard graded stone chips of 40 mm down nominal gauge) with 50% clean hard stone of sizes not execeeding 15 cm including shuttering, compacting and curing complete. |
| 6 | Providing and Laying of 60 mm Paver Block flooring with cement mortar of 1:4 base laid over and jointed with black cement slurry mixed with pigment to match the shade of the slab including preparation of sub surface with sandi/c stabilization of earth , providing lean concrete all complete |
| 7 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge. |
| 8 | ProvidingFitting and Fixing of Angle iron Grating of 50 mmx 50mm x 6 mm including welding fixing with nut and bolt and applying red oxide primer and painting all complete as per the direction of Engineer in charge |
| 9 | Haulage for stock material via Surfaced Road for the distance of 10km excluding loading and unloading all complete. |
| 10 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 11 | Haulage for Fine Aggregate via surfaced road for the distance of 40km excluding loading and unloading all complete. |
| 12 | Haulage for Coarse aggregate via Surfaced Road for the distance of 40 km excluding loading and unloading all complete. |
| 13 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 10 km excluding loading and unloading all complete. |
| 14 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum |
| 15 | CONSTRUCTION OF COMMUNITY HEALTH CENTRE |
| 16 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead up to 30 meters. |
| 17 | Providing and laying hand packed stone soling in building works with clean hard selected stones all complete. |
| 18 | Isolated Foundation Base |
| 19 | Providing & Layingin position cement concrete of 1:2:4 mix.(1 cement, 2coarse sand,4 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete. |
| 20 | Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete. |
| 21 | Providing and laying Coarse Rubble Stone Masonry with hammered dressed clean hard selected stone in 1:3:6 c.c. (1 cement, 3 clean coarse sand, 6 clean hard graded stone chips of size 40 mm down nominal gauge) including bond stone, through stone of size 150 mm x 150 mm x 450 mm manufactured in 1:4:8 (1 cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) curing etc. all complete. |
| 22 | Providing and laying damp-proof course 50mm thick waterproof chemical mixed with cementconcrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20mm nominal size derived fromnatural sources). |
| 23 | Providing & Laying in position1:1.5.3 mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20 mm and down nominal gauge) reinforced cement concreteof nominal mix as per the direction of Engineer in Charge.( M20 GRADE) |
| 24 | Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available) |
| 25 | Foundation, footings, base of column etc. for mass concrete. |
| 26 | Squarecolumns |
| 27 | Form work for beam, lintels, girders, brersumers & cantilevers. |
| 28 | Floor slab, roof slab, landing, balcony & access platform. |
| 29 | Wall |
| 30 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 31 | Tor steel reinforcement |
| 32 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge. |
| 33 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately) |
| 34 | External partition |
| 35 | Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work |
| 36 | Providing and Laying 15 mm thick cement plaster of specified mixof 1:3 in single coat including finishing even and smooth and curing etc all complete. |
| 37 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 38 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over20mm (average) 1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 39 | Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete |
| 40 | Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 41 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed( loreno, bronzo, colubia or equivalent)in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 42 | Providing/ fitting/ fixing of dressed sal timber in all types of frames complete. |
| 43 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. |
| 44 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) |
| 45 | Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing12.00Kg/sqm as per the direction of Engineer - in- Chargeall complete |
| 46 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fasteners |
| 47 | Providing & fixing brass bright finished butt hinges with necessary screws etc. complete. |
| 48 | 150mmx31mmx4mm |
| 49 | Providing, fitting & fixing sliding door bolts of size 300mm x 16mm with nuts and screws etc. complete. |
| 50 | Brass (Chromium plated) |
| 51 | Providing, fitting & fixing Tower bolts 300mm x 10 mm with necessary screws etc. complete. |
| 52 | Brass (copper oxidized) |
| 53 | Providing, fitting & fixing Handles 125 mm size with necessary screws etc. complete. |
| 54 | Brass (Bright finish) |
| 55 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete |
| 56 | Providing, fitting, fixing of 24 BWG pre-painted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete. |
| 57 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 58 | Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre-painted HULAS sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete. |
| 59 | Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete. |
| 60 | Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes. |
| 61 | Providing / Fitting / Fixing of PVC Ceiling i/c making channel in alumnium frame with hook & bolt all complete as the direction of engineer incharge |
| 62 | Providing / Fitting& Fixingof Grid False Ceilingin Mineral Fibre including making of channel in aluminum frame all complete as per the direction of engineer incharge |
| 63 | Providing, fitting, fixing of 24 BWGGP sheet roofing by making corrugation of50mmx50mm x50mm on bothside with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete |
| 64 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete( Both in Internal & External surface) |
| 65 | Providing and painting with Plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 66 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 67 | Providing and French spirit polishing two or more coats including cleaning of the surface to make smooth and free from dirt and dust and sand papering etc. on new look complete. |
| 68 | Providing & applying priming coat with ready mixed Red oxide, zinccromate primer on steel/galvanized Iron steel works including preparation of the surface complete. |
| 69 | Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface. |
| 70 | Provision for providing fitting and fixing of Sikkimese Vernacular style and feature in exposed columnin traditional motiveand painting all complete as per architectural drawing and engineer in charge |
| 71 | Providing and laying 15mm thick cement plaster of 1:3 mix in single coat for SikkimiesHeritage Design nExposed external walll surface including carving, paintingdesigning in traditional motive all complete as per Architectural drawing & Engineer in charge |
| 72 | Providing and laying of Stone cladding with cement mortar of :1:3 mix and giving the good finish all completed as per the direction of engineer in charge |
| 73 | Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extrudedaluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement withoutstress to it\"s components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions andfinish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured tobase members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centeringarrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063). |
| 74 | Floor Joint of 50 mm gap |
| 75 | Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System.The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). |
| 76 | Wall Joint of 50 mm gap |
| 77 | Providing, fitting and fixing in position collapsible steel shutterwith vertical channel (20x10x2)mm and braced with flat iron diagonals (20 x 5)mm size with top and bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer - in- Chargeall complete: |
| 78 | Haulage for stock material via Surfaced Road for the distance of30km excluding loading and unloading all complete. |
| 79 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 80 | Haulage for Fine Aggregate via surfaced road for the distance of 40km excluding loading and unloading all complete. |
| 81 | Haulage for Coarse aggregate,via Surfaced Road for the distance of 40km excluding loading and unloading all complete. |
| 82 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of10 km excluding loading and unloading all complete. |
| 83 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum/ excavated earth. |
| 84 | WATER SUPPLY AND SANITATION |
| 85 | Providing, Fitting and fixing GI pipe of medium class,(excluding trenching, refilling, compactingandthe cost of fittings) all complete |
| 86 | Trench cutting in mixed soil 0.45m in depth and 0.30m in width |
| 87 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 88 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 89 | External work - Exposed on wall |
| 90 | as per required size of pipe |
| 91 | as per required size of pipe |
| 92 | as per required size of pipe |
| 93 | Providing Laying and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes and fittings of approved make confirminf to IS 15778 CTS SERIES ASTM D2846,SDR-11 GRADE having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.0m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including cost of cutting chasess and making good the same in walls and floor etc, incl the piping shall be fixed and concealed by covering thr groove with GI plaster mesh using /as per required gauge and pressure |
| 94 | Internal work- concealed |
| 95 | as per required size of pipe |
| 96 | as per required size of pipe |
| 97 | as per required size of pipe |
| 98 | Providing and fixing C.P. brass Wall Mixture of approved quality conforming to IS:specifications of 15 mm nominal bore (CP Brass Wall Mixture) (F200020 of Hind Ware make or equivalent) etc with all accessories fittings ,flanges ,labour etc complete including commisioning testing installation confirming to ISI specifications. |
| 99 | Providing and fixing C.P. brass Sink Mixture of quarter turn type of approved quality conforming to IS:specifications of 15 mm nominal bore (CP Brass Sink Mixture) F(330023 of Hind Ware make or equivalent) etc with all accessories fittings, flanges ,labour etc complete including commisioning testing installation confirming to ISI specifications. |
| 100 | Providing and fixing C.P brass long bodybib cock of approved quality confirming to IS standards( Jaquar or equivalent Brand ) |
| 101 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS:8931 ( Jaquar or equivalent Brand ) |
| 102 | Providing and fixing C.P Brass Anglular Stop Cockfor basin mixer points of approved quality confirming to is 8931a) ( Jaquar or equivalent Brand ) |
| 103 | Providing and Fixing C P Brass Connecting Pipe of approved quality,High or low pressure with plastic floats etc.,Complete. |
| 104 | Connecting Pipe |
| 105 | Providing and Fixing C P BrassBall Cock of approved quality,High or low pressure with plastic floats etc.,Complete. |
| 106 | Providing and FixingWash Basin with CI Brackets, 15 mm CP Brasspillar taps, 32 mmCP Brass waste to standardpatternincluding painting of fittingand brackets, cuttingand making good on walls wherver require ( , Hindware,Jaquar or Equivalent) |
| 107 | Wash Basin 450mm x 300mm |
| 108 | SANITARY FITTINGS. |
| 109 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Starwhite) CAT NO 92008 |
| 110 | Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltrautomatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete |
| 111 | Range of One urinal basins |
| 112 | BATH ROOM FITTINGS |
| 113 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 114 | Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 115 | Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. |
| 116 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete |
| 117 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting offittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm |
| 118 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent |
| 119 | 2000 litre capacity |
| 120 | Supply and fixing of Type B SWR PVC soil and waste pipes jointed with rubber ring with good quality lubricant for shafts and for drainage lines with solvent cement. As per IS - 13592-1992 for pipes and IS 14735 for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions pan connector,testing etc laid underground with suitable clamps and specials curing etc complete ( including excavating trenches in all sorts of soil of required width for pipes ,cables etc including excavation for sockets and dressing of sides ramming of bottoms depth upto 2.5m including getting out the excavated soil and then returning the soil as required in layers not exceeding 20cms in depth including consolidation danger lighting , pumping put water removing the slush and sullage etc and disposing the surplus excavated earth within a lead of 50m or as directed) |
| 121 | Internal work - Exposed on wall |
| 122 | as per required size of pipe |
| 123 | as per required size of pipe |
| 124 | as per required size of pipe |
| 125 | as per required size of pipe |
| 126 | as per required size of pipe |
| 127 | Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes |
| 128 | 100 mm dia. Supreme / Prince |
| 129 | Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 130 | 100 x 100 x 100 x 100 mmSupreme / Prince |
| 131 | SEPTIC TANK, SOAK PIT |
| 132 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 133 | Providing and laying hand packed stone soling in building works with clean hard selected stones all complete. |
| 134 | Providing & Layingin position cement concrete of 1:3:6 mix.(1 cement, 3 coarse sand,6 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete. |
| 135 | Providing & Laying in position1:1.5:3 mix (1cement, 2 coarse sand 4 graded stone aggregate 20mm and down nominal gauge) reinforced cement concreteof nominal mix excluding the cost of form work, finishing & reinforcements of cement) as per the direction of Engineer in Charge. |
| 136 | R.C.C. wall |
| 137 | Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available) |
| 138 | Floor slab, roof slab, landing, balcony & access platform. |
| 139 | Wall |
| 140 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 141 | Tor steel reinforcement |
| 142 | Haulage for stock material via Surfaced Road for the distance of30 km excluding loading and unloading all complete. |
| 143 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 144 | Haulage for Fine Aggregatevia surfaced road for the distance of 40km excluding loading and unloading all complete. |
| 145 | Haulage for Coarse aggregate, via Surfaced Road for the distance of 40km excluding loading and unloading all complete. |
| 146 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 10 km excluding loading and unloading all complete. |
| 147 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum/ excavated earth. |
| 148 | DISMANTALLING OF LOW COST EXISTING STRUCTURES |
| 149 | Labour engaged in dismantling of Ekra Partion internally & Externally manuallycompletely |
| 150 | Labour engaged in dismantling of PCCFlooring allcompletele using hammer or any other materialand disposing |
| 151 | Labour engaged in dismantling of Plinth wall allcompletele using hammer or any other material |
| 152 | Labour engaged in dismantling wood work in frames, trusses, purlins and rafters up to10 metres span and 5 metres height including stacking the materialwithin 50 metres lead |
| 153 | Labour engaged in Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead |
| 154 | Labour engaged in Dismantling of Wooden Flooring Removing from the frame and stacking all complete |
| 155 | Labour engaged in dismantling of Wooden Ceiling Removing from the frame and stacking all complete |
| 156 | Labour engaged in Dismantlingand removing of GCI sheetfrom the frame and stacking all complete |
| 157 | Labour engaged in removing of blackboard and shifting of all the table and chairand desk all complete |
| 158 | Labour engaged in distmantling of U shapeddrain all complete |
| 159 | Labour engaged in distmantling ofProtective Wall all complete |
| 160 | Provision for loading andstacking of all dismantled and demoslished material including steel, concrete , stone bouilder at a distance of 50 to 100 mall completed and cleaning all area for new constriction |
| 161 | Provision for transportation and throwing all dismanted and demolished at a distance of 20 to 30 km at notified space all complete |
| 162 | INSTALLATION OF PASSANGER LIFT |
| 163 | Provision for installation of standard passanger lift. |
| 164 | INSTALLATION OF FIRE FIGHTING SYSTEM |
| 165 | Provision for Fire Fighting System with Fire water tank. |
| 166 | ELECTRICAL WORKS |
| 167 | SECTION \"A\" :-INTERNAL WIRING. |
| 168 | Wiring for light/Fan/Call bell & 6 A plug point with 1.5 sqmm HR FRLS (Havells/Polycab/RR Cable) PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1.5 sqmmHR FRLS PVC insulated copper conductor single core cable as required. |
| 169 | Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2.5 sqmm HR FRLS (Havells/Polycab/RR Cable) PVC insulated copper conductor single core cable in Existingrecessed alkathine pipe and earthing the point with 2.5 sqmm HR FRLS PVC insulated copper conductor single core cable etc.as required. |
| 170 | Wiring for 16 A plug point with 2.5 sqmm HR FRLS (Havells) PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 2.5 sqmm HR FRLS PVC insulated copper conductor single core cable as required. |
| 171 | Wiring for sub-main for 16 amps plug points with 4.0 sqmm HR FRLS (Havells) PVC insulated copper conductor single core cable in PVC casing caping system and earthing the point with 4.0 sqmm HR FRLS PVC insulated copper conductor single core cable as required. |
| 172 | Wiring for sub-main with 6.0 sqmm HR FRLS (Havells/Polycab/RR Cable) PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 6.0 sqmm HR FRLS PVC insulated copper conductor single core cable as required. |
| 173 | Supplying & fixingConduit inspection bend 1/2\",3/4\"1\" |
| 174 | Supplying & fixingConduit inspection Tee 1/2\",3/4\" & 1\" |
| 175 | Supplying & fixingConduit inspection round 1/2\",3/4\" & 1\" |
| 176 | Supplying & fixing ofMS Boxas Junction purpose 100mx 150 mm |
| 177 | Supplying & fixing ofMS Boxas Junction purpose 200mx 150 mm |
| 178 | Supplying & fixing Bakelite Sheet125 mm x 175 mm |
| 179 | Supplying & fixing Bakelite Sheet225 mm x 175 mm |
| 180 | SECTION :- `B\"SWITCH , SOCKET & ACCESSORIES |
| 181 | Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box (Mosaic) including connection etc. as required. |
| 182 | 1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box. |
| 183 | 2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box. |
| 184 | 3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box. |
| 185 | 4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box. |
| 186 | 6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box. |
| 187 | 8 no. 06 amps FT switch with 1 no white 6 moduler plate and 6/8 moduler metal flux box. |
| 188 | Supplying & fixing 1 no. Legrand(Mosaic) 16 amps socket, & 16 amps switch,white plate (6/8 module) & Metal flux box (6/8 module)includingconnection etc. as required. |
| 189 | Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box (Legrand) including connection etc. as required. |
| 190 | 1 no. 06 amps Bell Push with 1 no white 1 moduler plate and 1 moduler metal flux box. |
| 191 | Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box (Legrand) including connection etc. as required. |
| 192 | SECTION \"C\" :- LIGHT FITTINGS AND ACCESSORIES |
| 193 | Installation,testing&commissioning of Flourescent lightfitting,decorative electronics triplite for wall/ceiling mounting Philipsorequivalent with 1 x TL\"D 36w/40w |
| 194 | Supplying & fixing LEDtube light fitting 22 watts 4 ftincluding connection etc. as required.. |
| 195 | Supplying & fixing recessed mounted LED panel light fitting 2ft x 2ft 36 wattsincluding connection etc. as required. |
| 196 | Supplying & fixing recessedLED fitting 10 wattsincluding connection etc. as required |
| 197 | Supplying & fixing Calling bell (Ding-Dong) Anchor with 100mm x 150mm PVC box including connection etc. as required. |
| 198 | Exhaust Fan (Anchor/Bajaj/Khetan or equivalent make) 12\"heavy duty with complete accessories as required. |
| 199 | SECTION - `D\":- DISTRIBUTION SYSTEM & EARTHING WORKS |
| 200 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: |
| 201 | LTDB 800 A INCOMING:1 No. 1600A, 4P,50KA, MDO ACBINCOMING:1 No. 1600A, 4P,50KA, MDO ACB.OUTGOING: 2 Nos. 400A TP MCCB ,50 KA, 4 Nos.250A TP MCCB, 35 KA & 1 No. 63A TP MCCB, 35 KAall with built in Thermo Magnetic Release. |
| 202 | L.T. distribution Switch Board, Indoortype kiosk , 100 Amp, having electrolytic annealed copper bus bar 50x12 mm for phase & 50x6 mm for neutral circuits mounted on glazed porcelain or bakelite base and fitted with voltmeter, ammeter, selectorswitches for ammeter & voltmeter, electronic KWH meter, indicating lamps, cabin light, fabricated with 12 gauge M.S. plain sheet, painted with anti rust primer & two coats of Epoxy paint of sade 631 as per IS:5, front opening doors with Gasket and locking arrangement complete with following incoming and outgoing controls: |
| 203 | Incoming :1 No. 100A 415 V, FP MCCB breaking capacity 50 KA with built in Thermo Magnetic Release. |
| 204 | Outgoing :2 Nos. 63A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. |
| 205 | 1 No. 32A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release having Relay setting 16-25A |
| 206 | Supplying & installing MCB isolator (Havells/Legrand make) Double pole 40 Amps |
| 207 | Supplying & installation MCB distribution board Double Door/Single door (Havells /Legrand make). |
| 208 | 16 ways SPN(Double door) |
| 209 | Supplying & Installation of Miniature circuit breaker (Havells) |
| 210 | Single pole 6 Amps |
| 211 | Single pole 16 Amps |
| 212 | Supplying & installing (Havells/Legrand) Changeover Switch |
| 213 | Providing & earthing 2 mtr long ASHLOK make encapsulated pipe system (Pipe in pipe technology) maintenance free safe earthing electrode Model T 19 ,outer dia of pipe 50mm & inner pipe dia 25 mm and 1 bag back fill chemical compound. |
| 214 | Providing & installing Copper tube type 1m long lightning arrestor having prongsat the top of the arrestor and base plate with nuts & bolts. |
| 215 | Providing & laying 25mm x 5mm copper strip for looping earth from lighting arrestor to earthing point. |
| 216 | Providiong & laying 6/8 SWG cu wire from main dist. Pannel to distribution system of the building. |
| 217 | Excavation of 0.45 x 0.90 x 1.00 m cable trench in mix soil & re-filling with available excavated earth and providing Bitumen on the top of the trench. |
| 218 | Rigid U PVC pipe as per IS 4985-2000 working pressure 6 kgf/cm2 (FinOlex) 50mm Dia. |
| 219 | Providing & laying 1.1 KV grade PVC insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required. |
| 220 | 2 core 10 sqmm |
| 221 | 3.5 core 35 sqmm |
| 222 | 8.5 Mtrs. Long 410-SP-21 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 185 Kgs |
| 223 | Red oxide metal primer (NEROLAC OR equivalent) 2.5 lts/ structure. |
| 224 | Aluminium paint(NEROLAC OR equivalent) |
| 225 | Supplying and fixing MS junction box including PVC single core 2.5 sqmm Aluminium wire(Havells make or equivalent) |
| 226 | HID Lamp, HPSV 250 W roadway lighting luminaire Integral, Cast aluminium with side reflactors complete set Bajaj make or equivlent |
| 227 | Providing and earthing 2 mtr.Long ASHLOK make encapsulating pipe system (Pipe in pipe technology) maintanence free safe earthing electrode Model T 19, outer dia of pipe 50mm & inner pipe dia 25mm and 1 bag back fill chemical compound. |
| 228 | Concerting of 8.5 Mtrs. Lattice structure/swaged steel tubular pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs pit, construction of parapet 0.35x0.475x0.153 mtrs in 1:3:6 cc i/e 12mm cement plaster of parapet in 1:4 mix |
| 229 | 1.1 KV, 2 Core x 16 Sqmm, PVC/XLPE InsulatedHeavy Duty Power Cables for working voltage upto & including 660/1100 Volts CONF. To IS: 7098 (Part-1) with latest amendment Aluminium Conductor. |
