|
| 1 | chipping the existing damaged plastered surface including all labour cost completed., complying., |
| 2 | Plastering in C.M 1:3 mix by 20 mm thick including all materials and all other labour cost complete., complying |
| 3 | paving the floor with best approved quality fine polishedkotta stone slabs of size 600x600 of 18/20 mm with machine cut edges and matching marble slab not less than 100 mm width other than adanga marbles |
| 4 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaced |
| 5 | Plastic Emulsion painting two coats over priming coat including cost and conveyence of all materials to site and all labour charges etc complete( outer wall ) |
| 6 | painting two coat of old iron works such as steel doors, windows, ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming |
| 7 | Removing the pressed tiles including all labour charges etc completed., |
| 8 | Weathering course concrete using best quality broken brick jelly of 20 mm uniform gauge in pure slaked lime ( No sand to be used ( over the RCC roof slab in the proportion of brick jelly to lime being 32:121/2 by volume laid over in single layer and consolidated to the required stone |
| 9 | White washing two coats over old plaster surface including all materials labour |
| 10 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230 mm x 20 mm of approved quality set in cement mortar 1:3using 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight to cem 80% new files |
| 11 | Provision for Electrical |
| 12 | Light point |
| 13 | Fan point |
| 14 | Plug point |
| 15 | tube light fitting |
| 16 | Fan fittings |
| 17 | HDPE Tank 2000 lites |
| 18 | Provision for Bala Painting |
| 19 | Provision for cheppan rock and cub board |
| 20 | Brick work in cement mortar 1:5 mix using country bricks including all cost and conveyence of all labour and materials charges etc., complete |
| 21 | Plastering in cement mortar 1:5 mix using 12 mm thick including all cost and conveyence of all labour charges etc. completed |
| 22 | Supply and fixing of cuddapah slab for cheppal rock incluidng all charges for labour and material etc completed |
| 23 | Painting in single coats using plastic emulsion including cost and conveyence of all materials to site and all labour charges etc., |
| 24 | Providing cup-board shutter with frame using termite /water proof plywood of 19 mm thick over which laminated sheet of 0.8 mm thick fixed inside the shutter and 1 mm thick fixed in the outside of the |
| 25 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
