Tender For Development Officer Will Expand The Residence In Lunkaransar, Bikaner-Rajasthan

Tender For Development Officer Will Expand The Residence In Lunkaransar; 1 Excavation of soil up to 1.5 depth in the foundation, ditch, parnala, leveling, watering, cleaning of the side, taking out the excavated soil, filling the lower areas with soil again after filling the foundation and disposal of the remaining soil up to a distance of 50 meters. 2 foundation and kursi first grade brick masonry in cement-gravel 1:6 masala, including sealing of gutters and drains. 3 Additional Rashi superstructure in masonry work upto 4.5 m height from chair level. 4 Cement concrete 1:1.5:3 mix pouring and supplying in poured cement concrete, pressing in roof slabs, roofs, beams, lintels etc., leveling and leveling the surface with 1:3 cement mortar etc. but steel and shuttering cost separately. 5 R.C.C. Supply iron for cutting, bending and placing and tying work. 6 CenteringShuttering (plank and shuttering) for R.C.C. roof, slabs, eaves, lintels etc. up to 4.5 m height and removal etc. as per specifications. Shuttering steel 7 Patti roofing 8 Bhawaria 9 Cement plaster wall with cement-gravel mixture in 1:6 ratio with scraping of joints and regular tarai for 14 days. 20 mm 10 PCC in 1:6:12 mix including curing and compaction etc. 11 P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absorption less than or equal to 0.08% and conforming to IS 15622 of approved make in all color and shade, laid with 20 mm thick CM 1: 4 including grounding the joints with white cement and matching pigment etc complete. 12 Add extra for Fixing glazed/ Ceramic/ Vitrified tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar. 7.19 13 Supplying white colored glazed china clay tiles and applying cement slurry over plaster and applying white cement in joints (price of plaster not included). Glazed tiles Size 30 X 45 cm 14 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD BSR item no. 12.22 ) 15 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding (PWD BSR item no. 12.39.1 ) 16 Providing and fixing calcium silicate board false ceiling at all heights including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm center to center one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm center to center to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm center to center shall be fixed in a direction perpendicular to G.I. Channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the calcium silicate board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm center to center with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting of thickness of calcium silicate board. 10.32.2 17 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 8 mm thickness 1.16.5 18 Double action hydraulic floor spring with stainless steel cover plate 19 Float glass sheet of nominal thickness 12 mm 20 Concealed lights 30 watt LMR 21 Providing and fixing aluminum work for doors, windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required PVC/n

INR 500 /-

INR 6 Lakhs /-