Construction of Panchayat Ghar at Panzinara A. Block Qamarwari- 1 PART-A CIVILEarthwork in excavation by manual means in trenches for foundations,drains,pipes,cables etc (Not exceeding 1.5m in width) and for shafts,wells,cesspits and the like not exceeding 10sqm on plan,including dressing of sides and ramming of bottoms lift upto 1.5m,including getting out excavated earth as directed: 2.8.1 All kinds of soil: 2 P/L of dry stone soling filling in bed in layers not exceeding 15cm as directed and hand packed same by thorough saturation with ramming complete (Q.S) (including 7km carriage). 3 P/L in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering.All work upto plinth level with 1:4:8 (1cement:4 coarse sand:8 graded stone aggregate 40mm nominal size). 4 P/L in position speecified grade of reinforced cement concrete including curing but excluding the cost of centering,shuttering,finishing and reinforcement.All works upto plinth level 5.1.2 1:11/2:3 (1 cement :11/2 coarse sand:3 graded stone aggregate 20mm nominal size). 5 Reinforced cement concrete work in beams,suspended floors,roofs,roofs having slope upto 15 degree landings,balconies,shelves,chajjas,lintels,bands,plain window sills,staircaes and spiral stair cases upto five level including curing but excluding the cost of centering,shuttering,finishing and reinforcement with 5.3.1 1:11/2:3(1 cement :11/2 coarse sand :3 graded stone aggregate 20mm nominal size). 6 Steel Reinforcement for RCC work including straightening,cutting,bending,placing in position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically treated bars of grade Fe-500D or more. 7 P/L in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering.All work upto plinth level with 4.4.4 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 40mm nominal size). 8 P/L damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) and curing complete. 9 Centering and shuttering including strutting,prooping etc and removal of form for :5.9.1 foundations,footings,bases of columns etc for mass concrete. 10 Centering and Shuttering including strutting,propping etc and removal of form for: 5.9.3 Suspended floors,roofs, landings,balconies and access platforms. 11 Brickwork with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 6.1.4 Cement mortar 1:6 (1cement :6 coarse sand). 12 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. 13 Cement concrete flooring 1:2:4 (1cement :2 coarse sand: 4 graded stone aggregate) finished with afloating coat of neat cement including cement slurry and curing complete, but excluidng the cost of nosig of steps etc complete.11.3.3 50mm thick with 20mm nominal size stone aggregate. 14 P/L of 12mm thick cement plaster in 1:6 mix. 15 P/Applying 1mm white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 16 Providing wood work in frames of doors,windows,celestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (including hold fast lugs or with dash fasteners): Silver wood best quality. 17 P/Fixing panelled or panelled and glazed shutters for doors,windows and celestory windows fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separatel,all complete as per direction of Engineer-in-charge( Note:- including Butt hinges and necessary screws). Silver wood Best Quality 30mm. 18 P/Fixing ISI marked flush doordoor shutters conforming to IS :2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.Silver wood Best Quality.9.21.1 with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. 19 P/Fixing wire guaze shutters using galvanized M.S wire guaze of average of average with for aperture 1.4 mm in both directions with wire of dia 0.63mm for doors,windows and celestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Silver wood Best Quality 30mm. 20 P/Fixing ISI marked aluminium butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as perIS: 1868) transparent of dyed to required colour or shade with necessary screws etc complete: (tower Bolt,AI drop,Handles,Butt hinges and necessary screws complete job. 21 P/Fixing M.S grills of required pattern in frames of windows etc with M.S flats,square or round bars etc including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings/wooden frames with rawl plugs screws etc. 22 Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufatures specifications: Painting wood work with deluxe multi surface paint of required shade.Two or more coats applied @ 0.90 litre/10sqm over an under coat of primer applied @0.75litre/10sqm of approved brand and manufacture. 23 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufaturers specifications:3.57.3 painting steel work with deluxe multi surface paint of required shade to give an even shade.Two or more coats applied @ 0.90 litre/10sqm over an under coat of primer applied @ 0.80 litre/10sqm of aproved brand and manufacture. 24 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including priming coat with water thinnable cement primer. 25 Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 26 Providing fitting,hoisting and fixing of roof trusses M.S conforming to relevant I.S code,as per approved design and drawings including providing M.S cleats,base plates,bolts and nuts/welded and one coat of red oxide zinc chromate primer (as per design and drawing as directed) i/c. ridges or hips,eaves boarding and soffits complete job. 27 Providing corrugated G.S Sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or G.I limpet washers filled filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. 12.1.6 0.50mm thick with zinc coating not less than 275 gram/m2. 28 P/L vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc completeSize of tile 600x600 mm. 29 P/Fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagnols 20x5 mm size,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia,steel pilleys, complete with bolts,nuts,locking arrangement stoppers,handles,including applying a priming coat of approved steel primer. 30 Carriage of materials by MT. A) Dry stone soling for average lead of 14kms. 31 B) Sand for average lead of 15kms. 32 C) Aggregates for average lead of 15kms. 33 D) Bricks average lead 20kms (per 1000) 34 Add provision for platform cutting ( to be paid as per actual during execution). 35 Cost of Display board and photographs. 36 PART B- SANITARY Earthwork in excavation by mnual means in trenches for foundation,drains,pipes etc not exceeding 1.5mtr in width and not exceeding 10sqm on plan depth upto 1.5mtr including backfilling of soil and disposal of excavated soil to be levelled and neatly dressed within 1mt lead. 37 P/L of stone soling hand packed on level including ramming with heavy rammers 38 P/L in position cement concrete in foundation an dplinth excluding the cost of centering and hsuttering all work upto plinth level (1:4:8) stone aggregate 40mm nominal size aggregate. 39 P/L in position cement concrete in foundation and plinth excluding the cost of centering and shuttering all work upto plinth level (1:3:6) stone aggregate 20mm nominal size aggregate. 40 Add 20% Plum 41 P/L in position of reinforcement cement concrete excluding the cost of centering and shuttering all work upto plinth level (1:1.5:3) stone aggregate 20mm nominal size aggregate. 42 Reinforcement for RCC works including straightening,bending,cutting,placing in position and binding all complete (TMT Bars). 43 Centering and Shuttering incl. strutting,propping etc and removal of forrmwork. 44 Centering and Shuttering including strutting,propping etc and removal of formwork suspended floors,roofs,landings,balconies and access platforms. 45 S/S of Boulder/GSB filling under rooms floors including watering and ramming with hand rammer. 46 Brickwork with FPS brick of class designated in 1:4 mix in superstructure abpve plinth upto floor five level. 47 Extra for brickwork in superstructure above plinth level upto floor fove level by manual means. 48 Half brick masonary with common burnt clay (non-modula) bricks of class designation cement mortar 1:3 (1 cement :3 coarse sand). 49 Structural steel work in single section,fixed with or without connecting plate,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete. 50 12mm thick cement plaster of 1:4 (1 cement :4 fine sand). 51 P/A 12mm plaster of 1:4 (1 cement: 4 fine sand) mix finished with neat coat of cement slurry. 52 P/L cement concrete flooring (1:2:4) mix etc complete 50 mm thick with 20mm nominal size stone . 53 Finishing exterior walls with water proffing cement paint pf approved brand and manufacture and of required shade to give an even shade two or more coats @3.84kg/10sqm. 54 Providing and fixing 1st quality ceramic glazed tiles of size 300x600mm conforming to I:13753 of minimum thickness 5mm of approved make like NITCO,ORIENT,SOMANY,KAJARIA or equivalent make in all colour,shades except bergundy,bottle green,black of any size as approved by Engineer -in-charge in skirting,risers of steps and dados over 12mm thick bed of cement mortar 1:3(1 cement :3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 55 P/L ceramic glazed floor tiles in size 300x300mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc complete. Floor Tiles. 56 Carriage of materials.Stone Soling average lead 14km. 57 Stone aggregate 20mm average lead 30km. 58 Bricks average lead 40km. 59 Sanitary Fittings and Disposal SystemProviding and fixing 3 layer PP-R (Poly propylene Random Copolymer) pipes conforming to IS:15801, UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain an dbrass threaded Polypropylene random fittings.This includes testing of joints complete as per direction of Engoneer-in-Charge .Internal work concealed fixing the pipe with clamps at 1.00 meter spscing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD (SDR-7.4) 60 P/F of PPR fittings of standard quality and make (c-grade) including jointing/testing complete. 61 P/Fixing of PPR gate value with C.I wheel of approved quality (ISI mark) (25mm). 62 P/F of folloiwing PVC pipes and fittings of standard quality & make (B type) Prince or equivalent incl. including PVC waste fittings (Collars,Tees,Elbows etc) jointing/testing complete. (100mm Dia). 63 75mm Dia 64 P/F PVC fittings of standard quality type.Floor Trap (100mm) 65 Tee 100mm. 66 Reducer 100mm to 75mm. 67 Provision for providing and fixing of Master traps 100mm dia of standard quality along with the mrtallic zinc coated finished screener of standard quality complete job. 68 Constructing masonary chamber 30x30x50 cm inside ,in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for stop cock,with C.I surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) including necessary excavation,foundation concrete 1:5:10 (1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. 19.26.1 with common burnt clay (non-modular) bricks of class designation 7.5. 69 P/F of water closet squarting pan (W.C) indian Type Orrisa pattern white vitereous china with 100mm PVC B Type P or S trap, 10 litre capacity low lwvwl flushing cistern of approved make with flush pipe, manually controlled device (handle lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with integral type foot rest). 70 P/F wash basin with C.I brackets,15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and rackets,cuttig and making good the walls wherever required:- White vitreous china wash basin size 550x4400mm with a 15mm CP Brass single hole basin mixer incl. white vitreous china pedestal for wash basin completely recessed at the back fo rthe reception of pipes and fittings. 71 P/F of looking mirror of superior glass (of approved quality), rectangular size (1200x600)mm with plastic moulded frame of approved make and shade with 6mm thick hard board backing. 72 P/F PVC waste pipefor counter basin/wash basin (32mm). 73 CP Brass Bib Cock 15mm. 74 P/F CP floor grating (100mm). 75 P/F CP Angle valve 15mm nominal bore 76 Providing and Placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12 701 marked, with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. 77 S/L of precast RCC rings of 6inch width and 3dia and 1.25 inch thick for soakage and septic tank incl. earthwork in excavation,RCC cover in M20 grade with reinforcement for soakage pits & incl. disposal of excavated earth beyond the site, disposed earth is to be levelled and neatly dressed incl. dewatering of trenches during execution (if required). 78 Heavy Duty Cover 79 P/Applying Mural painting/creativa painting under SBM Guide line i/c cost images,writing in words witth weather coat finishing complete as per specification and direction of Engineer-in-Charge complete job (Size 7x7). 80 P/F of lighting points as well as lighting circuit incl. point wiring through conduits with 1.5 Sqm Multi standard copper wire of appoved make for light points incl. cutting chases and making good the wall, cost of 5 amp Switch, conduits, switch pannel, including resurfacing of wall with POP complete job. 81 PART C - ELECTRICAL Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma urban/ Eq. make), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required..( Havell/Legrand/Roma urban/ Eq. make as per ISI Standard ).(1.10) 82 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Anchor/ Eq. make), single core cable in surface/ recessed medium class PVC conduit as required. A)2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 83 B)2 X 4 sq. mm + 1 X 6 sq. mm earth wire 84 Supplying and fixing of following sizes of medium class PVC conduit ( approved quality)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25MM. 85 Supply and fixing of 16/20 amp/230 V AC 6 pin sockets with cover plateAnchor Roma urban/SSK NV/Havells/ Eq. make. 86 Supply and fixing of 16/20 amp/230 V AC one way switch with cover plateAnchor Roma urban/SSK NV/Havells/ Eq. make. 87 Supply and fixing of 6 amp/230 V AC 5 pin socketswith cover plate Anchor Roma urban/SSK NV/ Eq. make. 88 Supply and fixing of 10 amp/230 V AC one way switch with cover plateAnchor Roma urban/SSK NV/Havells/ Eq. make. 89 Supplying and fixing of following sizes modules, GI box along with modular base & cover plates for modular switches in recess etc as required.12 Module 90 6 Module 91 4 Module 92 Supply installation testing and comm. Of 1200 mm ceiling fan ModeloysterMetallicHavell make/ Bajaj/Crompton(Flavia) of eq. standard( strictly as per approved sample) 93 Supply and fixing of 6 amp/250 V A.C fan dimmerstep type 2 module with cover plate Anchor Roma urban/SSK NV/ Eq. make. 94 Providing and fixing of9 watt LED Bulb ( LMR)Make:- Anchor/orient/havells/ Equivalent 95 S/F testing and comm. Of recessed/ surface mounted ceiling 10/12 WattLED down lighters philips / Havell/ Bajaj/ Crompton make of eq. standard. 96 S/F testing and comm. Of MCBs of the below mentioned capacities in sub main controls legrandC curve Series. A) 6-32 Amp SP MCB 97 B) 40-63amp DP MCB 98 Supplying and fixingof 16 wayhorizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make:-Hager/LEGRAND/SSK/Equt.Standard 99 Supply installationtesting andcomm. Of9 sweep exhaust fan Shutter type of havell /Bajaj/Crompton make. 100 Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block. 101 Supply, layingpartly overhead partly underground, testing and comm. Of 16mm2 core 650/1100 V grade unarmoured Aluminium cable Havell/Eq. standard make.
