|
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes.Preferred Brand : TATA/ Jindal/ Appollo |
| 2 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Preferred Brand : TATA/ Jindal/ Appollo /Equivalent brands (Brand approval has to be taken) |
| 3 | Providing and fixing expansion hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm |
| 4 | Providing and fixing of 3 mm thick solid compact polycarbonate sheets (Best make of approved quality) in required shapes and shades over the courtyard of Administrative block and other places. The sheets should be supplied in a single length as required at the site or as determined by the Engineer-in-Charge. The fixing of sheets shall be done using 50mm wide aluminum beading/self-drilling/self-tapping screws with rubber beading seal and silicone sealant complete up to any pitch in horizontal /vertical /curved surfaces, including the cost of material, labour, transportation,scaffolding, cutting to size and shapes where ever required with all lead and lift etc complete as per the direction of Engineer-in-Charge. Preferred Brand : Lotus/ Palram/Equivalent brands (Brand approval has to be taken) |
| 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metreand after dismantling the existing poly carbonate multi wall sheet, including stacking serviceable materials and disposal of unserviceable material within the campus with all lead and lift. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Preferred Brand : JSW/ Jindal/ TATA |
| 6 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Barge board (Upto 300 mm).Preferred Brand : JSW/ Jindal/ TATA |
| 7 | Providing and fixing MS mesh of approximate size 15x15mm (8 gauge) to window,door, grills, riveting, screws etc. and priming coat with approved steel primer all complete. |
| 8 | Providing and fixing on wall face 200 mm wide square UPVC Rainwater Gutter of approved brand and shape (Best make of approved quality), fixing the gutter with suitable stainless steel clamps of size 200X3mm at 1.00 m spacing, bolts, nuts and washers etc, after dismantling the existing PVC gutters and clamps including stacking serviceable materials and disposal of unserviceable material within the campus with all lead and lift. Rate includes cost of all materials, labour, scaffolding and making necessary connections with rain water pipes complete as per the direction of Engineer in Charge. Preferred Brand : Euro Guard/ Aqua Star/ Equivalent brands (Brand approval has to be taken) |
| 9 | Providing and fixing on wall face UPVC moulded fittings/ accessories for UPVC rain water square Gutter/ rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: End running outlet 200mm to 110mm. Preferred Brand : Euro Guard/Aqua Star/ Equivalent brands (Brand approval has to be taken) |
| 10 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6Kgf/cm2 - External work- Exposed on wall.Preferred Brand : Supreme /Finolex /Astral Pipes |
| 11 | Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree ElbowPreferred Brand : Supreme /Finolex /Astral Pipes |
| 12 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia BendPreferred Brand : Supreme /Finolex /Astral Pipes |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new workPreferred Brand : Asian/ Dulux/ Birla Opus |
| 14 | Raising of existing manhole G.I. cover and frame of size up to 90x90 cm to the required level, including dismantling of the existing slab, and making good the damaged portion using concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) or Brick work with Cement mortar 1:4 (1 cement : 4 coarse sand) as required, including the cost of all materials, labour, equipment, tools, and conveyance, etc., complete in all respects as per the direction of the Engineer-in-Charge. |
| 15 | Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing: 1:11/2:3 (1 cement : 11/2 coarse sand :3 graded stone aggregate 12 mm nominal size). |
| 16 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 17 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)Preferred Brand : Asian/ Dulux/ Birla Opus |
| 18 | Badminton court line marking includes setting out using masking tape and painting of court lines as per the approved drawing, with overall dimensions of 13.4 meters in length and 6.10 meters in width. The internal marking layout includes left and right service courts measuring 5.18 meters by 1.98 meters, a centre line, side lines for singles and doubles, a front service line at 1.98 meters from the net, and back boundary lines and long service lines for singles and doubles. All lines shall be 5 centimeters wide and painted in white using epoxy paint (two or more coats), including one coat of approved primer, as per the manufacturer's specifications. The work includes all materials, setting out, labour, and equipment and shall be completed as per the direction of the Engineer-in-Charge.Preferred Brand : Asian/ Dulux/ Birla Opus |
