Tender For Spl Repair To Bldg No T-198 And T-202 At Sumdo Under Ge 863 Ews; 1 Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr in Charge. 2 M &L for 25 mm thick PCC 1:4:8 type D2 (Using 12.5mm gradedstone aggregate) as in sub base in floors complete all as specified and directed by Engr in Charge. 3 M&Lscreed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite complete all as specified and directed by Engr in Charge. 4 M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in loors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge. 5 M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement complete all as specified and directed by Engr in Charge. 6 Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed by Engr in Charge. 7 S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in Charge. 8 S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in Charge. 9 Ditto as item No 08 above but exceptsheeting covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in Charge. 10 Dismantling Unframed timber scantlings 40 Sq. cm and over in section complete all as specified and directed by Engr in Charge. 11 M&L 2nd class hard wood in scantling timber framed work fixed clean sawn complete all as specified and directed by Engr in Charge. 12 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed by Engr in Charge. 13 M & L 6 mm thick Veneered decorative Ply wood, grade 1 with BWR resin with decorative face veneers on one face fixed with screws to timber frame work in ceiling complete all as specified and directed by Engr in Charge. 14 M&L for 9 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work complete all as specified and directed by Engr in Charge. 15 Dismantling Unframed timber scantlingsunder 40 Sq. cm and over in section in fillets, rails, posts, rafters, purlins,complete all as specified and directed by Engr in Charge. 16 S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm complete all as specified and directed by Engr in Charge. 17 M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed by Engr in Charge. 18 Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed by Engr in Charge. 19 Taking down chowkat or framesexc 1.5 sqm but n. exc 4 sqm each (w/o taking of shutters from the frame ) complete all as specified and directed by Engr in Charge. 20 S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. complete all as specified and directed by Engr in Charge. 21 S & F 35 mm thick second class hard wood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fixed to chowkhats. complete all as specified and directed by Engr in Charge. 22 S & F Anodised aluminium door/window shutters, (powder coating) aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and directed by Engr in Charge. 23 Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by Engr in Charge. 24 M&L for 6.3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed by Engr in Charge. 25 M & L for Door closer hydraulically regulated, Aluminium body section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr in Charge. 26 Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.complete all as specified and directed by Engr in Charge. 27 S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified and directed by Engr in Charge. 28 S and F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and fixed complete all as specified and directed by Engr in Charge. 29 S and F 125 mm long MS Butt hinges mediumweight, cold rolled mild steel, and fixed complete all as specified and directed by Engr in Charge. 30 S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs complete all as specified and directed by Engr in Charge. 31 S and F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr in Charge. 32 Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in Charge. 33 M & L forglazed ceramic coloured tiles invertical surfacesuch as skirting, dados and rises to steps etc 350x 250x 7mm/ 450X 350X 7mm thick over 10mm thick cement morter in CM 1:6,set and jointed in neatcement slurry and pointedin white or colour cement tomatch the surface of tilecomplete all as specified and directed by Engr in Charge.. 34 Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc.Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed by Engr in Charge. 35 S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed by Engr in Charge. 36 S & F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket, jet spray etc.(excluding flushing cistern & flush pipe) complete all as specified and directed by Engr in Charge. 37 S & F for plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deviced complete all as specified and directed by Engr in Charge. 38 Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed by Engr in Charge. 39 S & F in repairs White toilet paper holder, vitreous china box type fixed to wall with chromium plated brass screws,complete all as specified and directed by Engr in Charge. 40 S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and directed by Engr in Charge. 41 S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc complete all as specified and directed by Engr in Charge. 42 S&F in repair brass CP Stop cock/ Angle cock 15 mm fancy type choromium platedetc, complete all as specified and directed by Engr in Charge. 43 S&F in repairspillar taps 15mm dia cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and directed by Engr in Charge. 44 S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and directed by Engr in Charge. 45 S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type,one pair of fixing brackets ,60cm long between flanges complete all as specified and directed by Engr in Charge. 46 S&F in repair C.P. grating 100mm square/round with or without hole, complete all as specified and directed by Engr in Charge. 47 Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to all store complete all as specified and directed by Engr in Charge. 48 S & F 500 Ltr capacityRotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr in Charge. 49 Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed by Engr in Charge. 50 Taking up or down 20 mm steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed by Engr in Charge. 51 S&F 16mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed by Engr in Charge. 52 S&F 20mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed by Engr in Charge. 53 S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screwsSoap dish, vitreous China white, ap proximate size 160x 160x90 complete all as specified and directed by Engr in Charge. 54 M&L for Harrison rails, of anodised aluminium alloywith fixing brackets, stops, rollers etc. ® complete all as specified and directed by Engr in Charge. 55 S&F PVC waste pipe 40mm bore with cup and washers complete on new or old locations complete all as specified and directed by Engr in Charge. 56 S & Fin repair 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed by Engr in Charge. 57 S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr in Charge. 58 Demolition of reinforced cement concrete cover slab for MH/Spetic tank and removing the debris to a distance not exc 500 M complete all as specified and directed by Engr in Charge. 59 M & L precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregatefor cover slab for Man holes/Septic tank set in CM 1:4 complete all as specified and directed by Engr in Charge. 60 M&L for mild steel deformed bars or TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr in Charge. 61 M&L for mild steel deformed bars or TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr in Charge. 62 S & F75mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed by Engr in Charge. 63 S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed by Engr in Charge. 64 Demolition of precast concrete block walling built in cement morter complete all as specified and directed by Engr in Charge. 65 M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed by Engr in Charge. 66 M & L for rendering 15mm thick in cement plaster 1:4on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed by Engr in Charge. 67 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr in Charge. 68 M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed by Engr in Charge. 69 M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base under Chequeredtiles complete all as specified and directed by Engr in Charge. 70 M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thickwith grey cement andpigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engr in Charge. 71 Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc includingmaking good to the disturbed surfaces of wall, roofand floor etc to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge. 72 M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulatedstranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceilingincluding provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. 73 All as per Srl item No 72 here-in-before butFan point with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. 74 All as per Srl item No 72 here-in-before but call bellpoint with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. 75 All as per Srl item No 72 here-in-before but controlled with one 3 pin socket outlet 5 Amp onthe sameboard with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. 76 All as per Srl item No 72 here-in-before but controlled with one 3 pin socket outlet 5 Amp onthe independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. 77 All as per Srl item No 73 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cable 2.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. 78 Supply and fixing ofswitch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent. 79 Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one230 Volt flush typecomplete all as specified and directed by Engineer -in-Charge. Make :ANCHOR or equivalent 80 Supply and fixing switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent 81 Supply and fixing socket outlet 3 pin 15 Amp 2-in-one230 Volt flush typecomplete all as specified and directed by Engineer -in-Charge. Make :ANCHOR or equivalent 82 M&L Ceiling rose, 3 terminal with ISI markall as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent. 83 S/F in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable complete all as specified and directed by Engr in Charge. Make Crompton Model -Trimline LDL-20CDL or equivalent in Philips/Bajaj / Wipro. 84 Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent complete all as specified and directed by Engr in Charge.make : CG/Philips/wipro etc. 85 M & L lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittingtype complete all as specified and directed by Engr in Charge.make : CG/Philips/wipro etc. 86 Supply and fixing in replacement ofsheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and directed by Engineer-in-Charge . 87 Supply and fixing in replacement ofsheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed by Engineer-in-Charge . 88 Supply and fixing in replacement of isolator SPN 40 amps 230V complete all as specified and direct by Engineer-in-Charge . 89 S&F in replacement of MCB SP 6 Amp to 32 Amp, 240 Volts , 10 KA. Make : Havells / Legrand/ Sehneider/L&T or equavalent approved Make. complete all as specified and directed by Engr in Charge. 90 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers → complete all as specified and directed by Engr in Charge. 91 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed by Engr in Charge. 92 Supply and fix LED down light fittings,ceiling concealed panel light built in driver 7 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc. complete all as specified and directed by Engr in Charge. 93 Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed by Engr in Charge. 94 M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified and including testing on completion. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs GI Pipe of 15 mm dia of light grade upto 7.5M for protection of earth wire complete all as specified and directed by Engineer - in - Charge. 95 Supply and fixing air termination single pointed aluminium rod 12 mm 300 mm long include fixing on aluminium flat saddle on roof/wall with ms clamp/ nut bolt washer complete all as specified and directed by Engr in Charge. 96 M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth strip 32 x 6 mmmeans of bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.complete all as specified and directed by Engr in Charge. 97 M & L for GI strip 32 mm x 6 mm complete with saddles and fixing screws for fitting the strips. 98 M & L test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. Head screw all as directed by Engineer-in-charge. 99 Schedule of Credit
