Tender For Comprehensive Maintenance Of Otm Accn Under Age B/R-Ii Of Ge (N) Mamun; 1 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed. 2 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. 3 Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. 4 Dismantling water tanks of capacity exc 500 ltrs but not exc 1000 ltrs and removing to store, complete all as specified and as directed. 5 Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises, complete all as specified and directed. 6 Demolitionof cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cmthickness,below or above ground level, complete all as specified and as directed. 7 Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises,complete all as specified and directed. 8 Demolition of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. 9 Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. 10 Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. 11 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. 12 Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all asspecified and directed. 13 Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position complete all asspecified and directed. 14 Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in positioncomplete all asspecified and directed. 15 Brick work with fly ash (Old Size bricks) sub class B bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed. 16 PCC type C-1, 1:3:6 (using 20mm graded crushedstone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. 17 5mm thick rendering on concrete surface of ceiling, chajjas etc. in CM 1:3 finishing the surfaces even and smooth without using extra cement, complete all as specified and directed. 18 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed. 19 15mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC finished even and smooth without using extra cementcomplete all as specified and directed.Note: WPC shall be measured and paid for separately. 20 S&F in repairs 150 mmmild steel helical door spring for door closer, complete all as specified and directed. 21 M&L for 12 to 15mm thick makrana white marble stone slab table rubbed and polished laid over screed bed in cills, cooking platform and the like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade complete all as specified. 22 20mm thick cement plaster in cement mortar 1:4 on brick or concrete surface of sunken/floor finished even and smooth using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement incl raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed. 23 Supply only liquid water proofing compound, complete all as specified and directed. 24 Material and labour for preparation of surfaces and apply first of coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure & reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.45 ltr/sqm. Apply third and final coat undiluted @0.45ltr/sqm complete application to be done by the manufacture or authorised applicator complete all as specified and directed by Engr-in-Charge. 25 Note for item No 24 :-(a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface.(b) Conduct ponding test after 7 days, continnue curing of 14 days.(c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be includedthis fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted.(f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material. 26 M&L for 15 mm thick granite stone( table rubbed and polished) in step jambs, pillars, window cill cooking plateform etc. moulding in round edge stone slab, outer edges grinded in semi circular shape and finally polished to match the top surface and fixed in wall in cement morter (1:4) complete all as specified 27 S&F in repair 18mm thick HDHMR (High density high mositure resistance) one side decorated Pre laminated board, density not less than 850 kg per Cum, confirming to IS as in kitchen Cabinet, cupboard, ward robe and like fixed with suitable nails ( edgeing laps screws) to steel/wooden frame complete all as specified and as directed. 28 All as per item No 26 above but both side white board without print. 29 Factory made solid PVC door frame of size 50mmx90mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. 30 S&F in repair 5mm thick HDHMR (High density high mositure resistance) one side decorated Pre laminated board, density not less than 850 kg per Cum, confirming to IS as in kitchen Cabinet, cupboard, ward robe and like fixed with suitable nails ( edgeing laps screws) to steel/wooden frame complete all as specified and as directed. 31 Box type Steel windows and ventilators comprised of tubular frameand shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg staydovetailedor welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate)two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 and making good to disturbed area in same finish, complete all as specified and directed. 32 Pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats,with a shop coat of red oxide primer and making good to disturbed area in same finish, complete all as specified and directed. 33 Pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and making good to disturbed area in same finish, complete all as specified and directed. 34 S&F of fixing of factory made solid PVC flush door shutter 30mm thick with integral skin as frame & 5mm thick PVC Sheet high pressure compact laminate on both side of approved colour as infill sandwich with 20mm thick PVC solid board with C type GI or 20 x 19mm of MS pipe as stiffner & fixing in frame at site complete all as specified and as directed. 35 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkatsincluding two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. 36 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made glazed and skeleton shutters,open rebated and prepared to receive glass or gauge,etc. with sash bars, edges offraming plain, chamfered or rounded, fitted with cut &mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-ISection-8,clause 8.24 (a) for door shutter supplying and fitted to chowkats including two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. 37 S&F in repair 250 mm long MS sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed. 38 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. 39 Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples,complete all as specified and directed. 40 S&F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats ( min wt 190 gms) complete all as specified & directed. 41 S&F in repair 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. 42 S&F in repair 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. 43 S&F in repair 150mm long, stainless steel brignt finish handle fixed with nut and bolt /screws, complete all as specified and directed 44 Hasp and staple, safety type, mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed. 45 S&F swivel type PTMT shower any color for fixing with 15 mm bore pipe complete all as specified. 46 M&L for false ceiling of 7 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. 47 S&F in repair over head shower rose 125mm size (square/circular as per sample) for 15mm bore pipe, cast copper alloy chromiumplated complete all as specified & directed. 48 S&F in repair20mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed. 49 M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. 50 M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. For VERTICAL SURFACES 51 S&F 100 mm size stainless steel brignt finish handle (as per sample), fixed with nut and bolt /screwscomplete all as specified and directed. 52 Viterous china wash down water closet pan (pedestal pattern) coloured EWC CERA CAMPBELL; wall hung extended P size 655 x 365 x 755mm Cat Part No- 2099 including cistern Cat Part No- 2198, Soft close Seat cover Cat Part No- 2398 and twin flush Fittings Cat Part No- 2299, complete, all as specified and directed. 53 Pre-painted galvalume aluminium zinc coating GIbased corrugated steel sheet 0.50 mm thick of ancolour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling old sheet as specified and directed. 54 Pre-painted galvalume aluminium zinc coating GIbased plain steel sheet 0.50 mm thick of ancolour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling old sheet as specified and directed. 55 Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.36 sqmin floors etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:4 including cement mortar bedding (but not backing),rubish off the premises, complete all as specified and directed. 56 Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqmbut not exceeding 0.11 sqmin floors etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:4 including cement mortar bedding (but not backing),rubish off the premises, complete all as specified and directed. 57 Glazed ceramic coloured tiles 600mm x 300mm x 7mm thick as in vertical surfaces such as skirting, dado etc set and jointed joint free in neat cement slurry,pointed in white or coloured cement to matchover and including 10mm thick renderingin cement mortar 1:4 to receive tiles including cement mortar bedding ( but not backing),rubish off the premises, complete all as specified and directed. 58 Steel water tubing, 15mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed 59 Steel water tubing, 20mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. 60 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair, complete all as specified and as directed. 61 15mm bore bib tap, long nose, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule (fixed in repairs),complete all as specified and directed. 62 15mm bore stop valve/angel valve, chromium plated cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. 63 15mm bore concealed type stop valve/angel valve, chromium plated cast copper alloy with long shank and cup, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. 64 15mm bore pillar tap, copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe (fixed in repairs), complete all as specified and directed. 65 Supply, fixing, jointing and testing, 20mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed in repair, complete all as specified and directed. 66 S & F in repair vitreous china, wash hand basin, white, flat back, of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, complete all as specified or erecting stand including 32mm full threaded waste coupling and 32mm PVC waste pipe, complete all as specified and directed. 67 S & F in repair vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron P or S trap, front or back inlet and foot rests, any pattern including cement concrete bedding, complete all as specified and directed. 68 S & F in repairs vitreous china wash down water closet pan Pedestal coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed. 69 S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC,complete all as specified and directed. 70 S&F in repair PVC connection 15mm size with PTMT nuts at both ends of length 450mm for hot and cold water, complete all as specified and directed. 71 S&F in repair 32mm dia PVC waste pipe for wash hand basin, urinal and kitchen sinks, fixed in repair, complete all as specified and directed. 72 Sinks with drainage board made of 1mm thick stainless steelkitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed. 73 Stainless steel kitchen plate rack of size 750 x 900mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw, fixed in repair, complete all as specified and directed. 74 Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges (fixed in repair), complete all as specified and as directed. 75 S&F in repair 125mm size brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe of 15mm diaor union, complete all as specified and as directed. 76 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or BWP commercial plywood and fixed to wooden plugs/PVC rawl plug with chromium plated brass screws and cup washers, complete all as specified and directed. 77 Corner glass shelf assembly consisting of 5.5mm thick sheet glass size not less then 300x300x70mm with chromium plated brackets double guard and railing including chromium plated brass screws and wooden or plastic cleats (fixed in repair), complete all as specified and directed. 78 100mm diaPTMTgrating,complete all as specified and directed. 79 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. 80 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. 81 110mm bore dia PVC (SWR) reducers, complete all as specified and directed. 82 75mm bore pipe PVC (SWR) vent cowland fixed, complete all as specified and directed. 83 110mm bore dia PVC (SWR) bends, complete all as specified and directed. 84 75mm bore dia PVC (SWR) bends, complete all as specified and directed. 85 110mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified and directed. 86 Preparation of newplastered or unplastered surfaces of wall and applying three coats of white wash,complete all as specified and directed. 87 Preparation of new plastered or unplastered surfaces of wallsapplying two coats of oil bond distemper paint over a coat of priming paint, complete all as specified and directed. 88 Preparation of new plastered or unplastered external surfaces of wall and chajjas and applying one coat of wall care putty and two coats of cement base paint over a coat of alkali-resistant priming paint, complete all as specified and directed. 89 S&F stainless steel cabinet hinges soft close clip on 3D, 4 hole full overlay suitable for 14-20mm thick pannelled 105 degree opening complete all as specified and directed
