Tender For Welcome Maintenance To Certain Buildings At Gc Area At Mil Stn Gaya; 1 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. 2 M & L for rendering 10mm thick internal surfaces on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete. 3 M&L for rendering 10mmthick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed. 4 M & L for applying a thin layer of 0.50mm thick white wall care putty over newly plastered surface toprepare the surface even and smooth complete all as specified and directed. 5 M & L for preparation of new plastered/decorated wall surfaces and applying two coats of distempering with oil bound distemperas per manufacturer instruction white or tinted complete all as specified and directed. 6 M&L for two coats of oil bound distemper on newly plastered surfaces of celling including prepration of surfaces complete all as specified and directed. 7 M & L for preparation of old decorated surfaces including brooming down or steel wire brushing complete of walls and applying one coat of distempering with acrylic distemper as per manufacturer instruction white or tinted complete all as specified and directed. 8 M & L for preparation of old decorated surfaces including brooming down or steel wire brushing complete of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instruction white or tinted complete all as specified and directed. 9 M & L for applying two coats of water proof cement base paint on existing old treated surfaces of walls after preparation of surfaces including brooming down or steel wire brushing complete all as specified and directed. 10 M & L for applying a coat of water proof cement base paint on existing old treated surfaces of walls after preparation of surfaces including brooming down or steel wire brushing complete all as specified and directed. 11 M & L for one coat of exterior emulsion paint white or tinted on walls of fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg all as specified and directed. 12 M&L for preparation and filling of pitting/cracks (including V groove cutting of cracks/deepening) on surfaces with crack seal and finishing the surfaces as per existing treatment complete all as specified and directed. 13 M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. 14 M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. 15 Taking down chowkhats or frames exc 1.5 Sqm but exc 4.0 Sqm (without taking shutters from the frame). 16 Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame). 17 S&Faluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. 18 S&F anodised aluminium door shutter with powder coating (minimum thickness of powder coating 50 micron) aluminium sections weighing not less than 1.0 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door,anodised aluminium hinges, snap beading, screws,etc complete all as specified 19 S & F 100 mm long mortice latch with two levers(vertical type), mild steel body complete all as specified and directed. 20 S&F galvanised stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed. 21 S&F Sheet glass 5.5 mm thickness, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane 22 M&L 6 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice laminationfixed with screws/beading to timber/aluminium frame work or as required on site including fixing arrangement complete all as specified 23 S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. 24 S&F Solid PVC factory madeDoor shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC C channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling ofplain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing. 25 S & F aluminium handles, cast type, D shape anodised of size 150mm. 26 S&F 100 mm longButthinges, heavyweight, cold rolled mildsteel, and fixed. 27 S & F 200 mm long aluminium anodised barrel tower boltof extruded section complete. 28 S & F in repair double legged door stopper of aluminium alloy body with rubber all as specified and directed. 29 S & F in repair Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed. 30 S&F aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width andweight between 61 to 80 Kg complete all as specified as directed. 31 S & F in repair 20mm bore cut to length as required stainless steel decorative draphery rods with brackets and decorative finails as requiredcolour complete all as specified and directed. 32 Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads. 33 S&F 4mm thick figured glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane(to be fixed upto four storey of bldgs) 34 S&F in repair galvanised stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed. 35 S&F in repair aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width andweight between 61 to 80 Kg complete all as specified as directed. 36 M&L for cleaning and racking out the joint filling of floor (in marble, granite, kota stone, tiles etc) or wall tiles and refilling the same with white or coloured cement to match the colour. 37 M&L for dismantling floor tiles 10 mm size hearth or wall tiles including cement mortar bedding without breaking the tile and removing mortar (but not backing) and refixing in same or other placeasper requirement over 15 mm thick screed bed orbedding in CM 1 : 6 complete. 38 Dismantling of wall and ceiling boards, any thickness including cover fillets complete. 39 M & L for anodised aluminium snap grid frame work of size 600mm X 600mm for false ceiling incl hanging toplastered surfaces/iron framework using suspenders et complete all as specified and as directed. 40 S&F 4mm thick HSPC non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling. 41 S&F in repairs4mm thick HSPC non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling. 42 S&F as in repair PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. 43 S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all specified and as directed 44 S&F in repair 15 mm dia two way angle valves/Bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions 45 S & F as in repair brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. 46 S&F in repairs15mm borecast copper alloy chromium plated fancy type wall mixer tapfor cold & hot with overhead shower arrangement complete all as specified and directed 47 S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. 48 S & F as in repair chromium plated health faucet 15 mm with flexible tube (1.20 to 1.50 mtr chromium plated) provided rubber hose and wall hook etccomplete all as specified and as directed 49 Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed 50 Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directe. 51 S & F of 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete. 52 S & F of 25mm dia Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete. 53 S & F in repair 15mm stop valves/angle valves cast copper alloy fancy type chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed all as specified and as directed 54 S & F in repair 100mm dia steel chromium plated gratings fixed on floor trap/Nahani trap in cement mortar 1:4 complete all as specified and directed. 55 S&F in repair white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position incl tank nipple, connections as required in execution for GI/CPVC pipe lineall as specified and directed by Engr-in-charge. 56 S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. 57 S & F 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass/CPVC ferrule incl nipple connection/fittings to fixed the float valve complete . 58 S & F 25mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed to CPVC /GI pipe incl all fittings and accessories as required. 59 S & F 20mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed to CPVC /GI pipe incl all fittings and accessories as required. 60 S & F in repair 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. 61 S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed 62 S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm including a pair of bracket, 32mm dia CP waste and 15mm bore CP pillar tap screwed to iron pipe complete all as specified and directed. 63 S & F in repair vitreous China Urinal, Half stall type, white incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and union for discharge pipe complete. 64 S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. 65 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete. 66 M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. 67 M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed 68 S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. 69 S&F PVC (SWR) bends ISI marked any radius of 75 mm borewithaccess door complete all as specified and directed. 70 M & L for applying two coat of solar reflective coated thermoplastic paint/(heat resisting paint) over surfaces of any description including preparation of surfaces etc complete. 71 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 72 M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed 73 M&L for 20mm thick granite slab, machine cut, well polished, bedded in 15mm thick in CM 1:6 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement(1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting, polishing and rounding of edges etc. complete all as specified and directed. 74 M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 complete. 75 M&L for vitrified Ceramic tiles light shed 8 mm thick (square/ rectangular) polished, area of each tiles notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:6 complete. 76 All as per ser item No 75 above but as in vertical surfacesin skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete. 77 M & L for coloured glazed ceramic tiles in vertical surface 7mm thickexc 0.06 Sqm but not exc. 0.20 Sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in cement mortar 1:4as backing for tiles complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring/wall tiles) 78 M & L Machine cut Kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete.(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) 79 M & L Kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete.(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) 80 Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site.
